add T250 is good idea, many people waiting for that solution....patchunlock is already done, so it can`t be so hard for the_laser ;) If patch unlock possible then better via server for one log ?? What do you mean??

best regards

when t250 unlock will appear on public i will look at it, research and understand,than will place it into setool2.

T250 unlocking is already implemented with rocker dongle for quite some time now...

when t250 unlock will appear on public i will look at it, research and understand,than will place it into setool2.

Hi,
J110 still have bugs sir the_laser, i can't read usercode using unlock/repair why?

thanks in advance

T250 unlocking is already implemented with rocker dongle for quite some time now...

wrong.....solution is well known (unlock via patch) but it`s not implemented in Rocker. Legija sell this solution for 5000 Euro.

Some suggestions for improvements:

1. Add "pling" sound when battery needs to be reinserted while unlocking/flashing CID49. "%WINDIR%\Media\ding.wav" is a good sound for this. This one could also be used in DB2020 patch process - the one currently used is very generic so it's not always obvious that it's from setool. Or you can play it three times like in last build(?)

2. Save "Settings" in phone profiles. AFAIK, the settings are not saved together with phone profiles. It could be useful to have these stored with each individual profile - e.g. i could make one profile for only flashing (only "user server" checked"), and one for flash+unlock (unlock after flash, use server + alt bypass checked).

3. Option to warn before using credits: E.g "Credit will be deducted - continue? [Yes] [No]
The reason i want this is because it's very easy to make a mistake - especially for newbies. E.g: I want to flash a DB2020 but forget to uncheck "alt bypass" = credit wasted. Or write script with alt bypass checked = wasted. Since DB2020 unlock requires alt bypass checked, but does not use credit, it can be a little confusing, and not always easy to remember to uncheck it before doing other operations. Previous suggestion (settings stored in profile) would make that a little easier though...
Alternatively you should output "Credit deducted!" in output window to indicate when a credit is used. Or even better: output credits left before and after operation like universalbox e.g.

Just some suggestions to improve SEtool from perfect to exceptional ;)

how can i flash and unlock more than one phone at a time please
sorry wrong section

how can i flash and unlock more than one phone at a time please

Just open new windows within setool desktop

sagem sony ericson based (db2020 cpu inside)
it possible to adedd in setool
like my600v my600x ext ..
thanks:cool:

sagem sony ericson based (db2020 cpu inside)
it possible to adedd in setool
like my600v my600x ext ..
thanks:cool:

the_laser already said not possible without loaders (which he cannot obtain)

Sometimes program exits if flashfiles you select are located in the desktop! Move files to my documents or any other place but don't use files for flashing directly from desktop.

Hope this helps

is posible to be on suport forum just one file more,with just " upgrade pack" for folder setool,in case we don't need to download whole new soft,just latest changes ?


How do you get the beta version? I don't see any link on the forum pages. I'm assuming the beta version is called "SEtool2". I downloaded v1.1 from another site, is that current? Is there any documentation so I can use it. It looks a lot different to SEtools.
Sorry for all the questions I'm obviously a bit new to this.

All versions are beta

All versions are beta

How do I aquire one? - or - Where do I download one from?

From support area of course. Load up setool, click on 'Go Support' button, then download latest version v0.914020

wrong.....solution is well known (unlock via patch) but it`s not implemented in Rocker. Legija sell this solution for 5000 Euro.

Well smart clip on the SOLUTION for free? ~

use smart clip then. or wait, until i will understood all details of it, cause copy is not my style.

Is it possible to bundle the settings inside phones tabs, not to make a separate tab with the settings? I think it would be mouch easier to use this soft, with settings in separate window the newbies(like me) forget about check or uncheck some option.

Also a smaller inerface would be nice, but I ask this just because my laptop have 800/600 pixels screen size so you can ignore this, maybe is not good for everybody .

Marry Christmass!

@the_laser:

how to perform vkp for db2020?only check use server for flash and press write script?

@yangtzuyi:

"use server", "altbypass" , add main firmware file to fw area, select .vkp in misc files, press flash.

@decebal:

i like setool2 interface as it is.

@yangtzuyi:

"use server", "altbypass" , add main firmware file to fw area, select .vkp in misc files, press flash.

@decebal:

i like setool2 interface as it is.

hi mr laser, that is the only procedure to apply patches in a db2020 cid 52? always we have to add main every time we want to applya a patch? quick access patch works with setool2 full too?

B.R

@renzox:

"quick access" will not be implemented in full setool2, cause it is patchers thing for patchers only. and there is only one patch which setool2 users using - splock ;)

if you really need patch - you can wait 10 mins.

Tiny bug in v0.914022:

When identifying, "Provider" has the two first MNC digits switched.

242 01 is shown as 422 01.
240 07 is shown as 420 07.

Also, sometimes it shows MNC+MCC as 000 00 (not a big deal though):
Model:K530i
Brand:Netcom
MAPP CXC article: R8BB001 prgCXC1250912_GENERIC_NC
MAPP CXC version: R8BB001
Language Package:EUROPE_4
CDA article: CDA102823/89
CDA version: R2A
Default article: cxc1250959
Default version: R8BB001
PROVIDER: 000-00
Extended LOCKED

Already identified by the_laser mate, but thanks anyway. Just redownload latest version from official support site, all should be good ;)

SERVER SUPPORT ENABLED.
ChipID:C802,EMP protocol:0401
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
OTP LOCKED:1 CID:52 PAF:1 IMEI:35887401xxxxxx CERT:RED

Model:K850i
a2_TA_Read err:4
a2_TA_Read err:4
Language Package:NORDIC
CDA article: 1201-6672
CDA version: R7A
Default article: 1200-5441
Default version: R1CA037
PROVIDER: 000-00
Extended LOCKED

SECURITY UNITS BACKUP CREATED.
Elapsed:9 secs.

what is a2_TA_Read err:4?

ta unit can't be found.

the_laser,
in latest version we have:

- added flash manufactured output for j110/j120/k200/k220 phones.

Mine is:

CHIP ID:B496
FLASH CHIP mfgID: 0001, devID: 227E, devEXT: 21,00
FLASH CHIP SIZE:16 MB

In download area, we have FFS to download by brand of flash chip.
How to know what is the name of the flash without open phone?
Thanks in advance!

0x01:0x227E spansion
0xEC:0x257E amd

in the new version of the sofware .23 why remove the phone model z300 from the phone type, please add to the list again.

in the new version of the sofware .23 why remove the phone model z300 from the phone type, please add to the list again.

SEMC ODM Tab :eek:

0x01:0x227E spansion
0xEC:0x257E amd
would be better if flash id also described as flash manufacture / brand.

thanks

would be better if flash id also described as flash manufacture / brand.

thanks

Flash id can only be described by identifying phone. Not possible

Right, lets get this BETA thread back on-topic

NEW UPDATE VERSION OF SETOOL v0.914024

Some people simply aren't reading what the_laser wrote:

update eligible for 020 version ONLY, just unrar archive from distributive and
point updater to that directory.

Therefore, if you have v0.914021, v0.914022 or v0.914023 installed on your PC, you must downgrade first to v0.914020 using file below, then install the new update

[Only Registered Users Can See Links]

There, that wasn't so hard was it.

i simply just restored the setool2g.exe of v0.914020 and make the update, and it worked just fine.

@the_laser:
we have quick patch with SETool Lite 1.11 now, why not in full version?(we pay for it)
and how about a2 phones, support vkp pathches?

Hi, as laser says to me hahaha :

"quick access" will not be implemented in full setool2, cause it is patchers thing for patchers only. and there is only one patch which setool2 users using - splock

if you really need patch - you can wait 10 mins.

B.R

@renzox:
I think you can make request, but not like that
or you can choose another tool to do so

Br~

As renzox said, the_laser already answered 10 posts previous on this very same thread, so please search in future!

[Only Registered Users Can See Links]

@the_laser:

bug report:
W800 CID36 R1BC002
with the same VKP, it works on SETool v0.91390004
but will get error message on SETool v0.914024
VKP script loaded OK. Lines: 29
Patch structure created OK. Determining blocks to read...
New block #0000 added: $44280000
New block #0001 added: $45120000
New block #0002 added: $44EC0000
New block #0003 added: $45360000
Blocks selected OK. Reading blocks: 4
llbug: can't get all data, got:0 expected:1926
Block @ $45120000 read error. Have only: 00005280 bytes
Elapsed: 108 secs.

cable problems. tune your latency.

hi, the_laser

found bug with multi flashing.
Before I could flash 2 or more phones using different usb port (open new window feature) and it would automatically go
window 1 - usb 1 , window 2 - usb 2 etc etc.

but now in v026 if i try to multiflash all usb port open on usb#1 which mean they interfere with each other.

So now can only flash 1 phone at a time. :eek::eek:

BR

just tried to flash via usb two phones at once, no problems (usb #1 always is normal)
what exact problem you have got ?

anyway, i found possible problem with multiflashing on usb.

try attached version and reports.

(version removed, bugfix confirmed, version released as 027)

Why do you keep releasing the updaters to update only from the older .20 version, why not just keep it like it used to be as rars it was a hell of a lot easier to upgrade then. Or at least do the update to update from the previous release as most people keep up to date with releases

Why do you keep releasing the updaters to update only from the older .20 version, why not just keep it like it used to be as rars it was a hell of a lot easier to upgrade then. Or at least do the update to update from the previous release as most people keep up to date with releases

Why dont you release this software instead of Laser?? You can make it as you like. Isnt that a great idea??
:D

a little bug on 27 version on patch unlock of db2020 in the middle of the bypass process phones get disconnected and need to be connected again

problem flashing m600 on 027 version...but in 026 no problem..please laser fix this bug..

@japunlock:

not confirmed.
db2020 bypass working ok with 1,2,3 phones (not have more free usb ports available).
@omans:

not confirmed, m600,p990,p1,w960,g700,g900 working fine.
check your settings,i'm sure you set wrong one.


in both case users not attached logs of fault,and it is first rule of support.

sory boz.. here is a log from 027 version :

v0.914027/UNI
CARD SERIAL: 00000000
Loaded 51 flash descriptors
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
CAN'T DETECT SMARTPHONE
PROBABLY DRIVERS NOT RUNNING YET. REPEAT.
smartphone setup failed
Elapsed: 36 secs.
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
CAN'T DETECT SMARTPHONE
PROBABLY DRIVERS NOT RUNNING YET. REPEAT.
smartphone setup failed
Elapsed: 29 secs.

this from 026 version:

v0.914026/UNI
CARD SERIAL: 0000000
Loaded 51 flash descriptors
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
detected MASTER on COM13, SLAVE on COM14
PDA EROM VERSION: CXC162096 R1A05
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:8964
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:359315003**** CERT:RED
FLASH CID:49 COLOR:RED
phone model: M600i
part number: FAD-3022012-BV
Phone part version: CXC162037 R9F011
organizer part version: CXC162071 R6A16
CDA part version: CDA162011/2 R6A13
CCPU part version: CXC162098 R6A03
USERCODE:0000

Elapsed: 22 secs.
writing D:\SE tools\FILE FLASH\SE\M600\R6A13_CDA162011_2_ACPU_LL_Generic_Wo rld2.zip
Processing package
D:\SE tools\FILE FLASH\SE\M600\R6A13_CDA162011_2_ACPU_LL_Generic_Wo rld2.zip

detected MASTER on COM13, SLAVE on COM14
PDA EROM VERSION: CXC162096 R1A05
package not contains ISP files
Processing ACPU files
PROCESSING: Core OS
FILE FLASHED OK
PROCESSING: ROFS1
FILE FLASHED OK
PROCESSING: ROFS1 Extension
FILE FLASHED OK
PROCESSING: ROFS2
FILE FLASHED OK
PROCESSING: USERDATA
FILE FLASHED OK
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM13, SLAVE on COM14
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3593150034****CERT:RED
LDR:060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
Flash ID check:8964
Flash props sent ok
Processing CCPU files
Flashing:
R6A03_CXC162098_CCPU_fs_LL_NI_Red_CID49_Respin.sof tware
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:160
Will flash 8 blocks...
SSW loading returns:0
Flashing:
R9F011_CXC162037_CCPU_HE_LL_NI_Red_CID49_Respin.so ftware
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:2120
Will flash 106 blocks...
SSW loading returns:0
Processing update files
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM13, SLAVE on COM14
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:359315003***** CERT:RED
LDR:050926 1419 NPA1CXC1250163_SEMC_FLASHLOADER R2A
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
INT LDR:050810 0923 DB2000_CRIPPLED_PRELOADER_SETOOL2_R2B
Flash ID check:8964
Flash props sent ok
FOUND: R9F011 prgCXC162037_CCPU_HE_LL_NI
Restore from:R9F011 prgCXC162037_CCPU_HE_LL_NI
LDR:DB2001_SEMC_CS_LOADER_SETOOL2
loader startup: executed
loader GDFS startup: executed
Skipping filesystem startup for smart phone
loader unlock: executed
Writing gdfs var 0002:079E len:0053
Success
Writing gdfs var 0002:06D6 len:0001
Success
Writing gdfs var 0002:06D4 len:0006
Success
Writing gdfs var 0002:06D3 len:000F
Success
Writing gdfs var 0000:0094 len:0001
Success
Writing gdfs var 0000:00A6 len:0005
Success
Writing gdfs var 0000:0052 len:0014
Success
Elapsed: 628 secs.

In new version i cant read phone through usb.Have to try 2 3 times....

Please Fix this bug

@the_laser
Setool must have auto port detection for available ports.

its help so much to newbie.
every tool at market have this now.

just and recommendation its depend on you ..if you like it add if not ignore it.

@omans:

redownload version from support and retry.
i personally tested it on pda phones and found NO problems.

@sharaz191:
it is all fine with usb operations on 027 version.
what you can't read? where is logs?

it was great when locosto based models were added to the ultimate software but i still have problem unlocking j100, i am just crying out to you if you can make it possible to add j100 in the nest update:D:D:D

perhaps.

@japunlock:

not confirmed.
db2020 bypass working ok with 1,2,3 phones (not have more free usb ports available).


its usb connectivity somehow it is not detecting SE phones cause in bypass unlock after step3 phone restarts but soft cannot detect it again i have to manually disconnect and reconnect same after bypass fist stage after pressing ready i need to reconnect the phone twice
V23 working just fine

PS
im not posting log cause uit seems like normal but timing is the only difference

i checked such situation ~25 times and not got single problem. install latest usb drivers.

agree with japunlock, I also have the same problem

too bad. i not have that problem, so problem not in setool2. check yours drivers,etc.

for me db2020 patch unlock with v27 works without problem.

Guys try to create function how to stop credits

script of clear total time A2 doesn't work, tried several times in v0.914027, plz check it thanks!:

tawrite:0002188c00000000
gdfswrite:0000012d000000
gdfswrite:0000012f000000
gdfswrite:00000131000000

sory boz.. here is a log from 027 version :

v0.914027/UNI
CARD SERIAL: 00000000
Loaded 51 flash descriptors
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
CAN'T DETECT SMARTPHONE
PROBABLY DRIVERS NOT RUNNING YET. REPEAT.
smartphone setup failed
Elapsed: 36 secs.
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
CAN'T DETECT SMARTPHONE
PROBABLY DRIVERS NOT RUNNING YET. REPEAT.
smartphone setup failed
Elapsed: 29 secs.

this from 026 version:

v0.914026/UNI
CARD SERIAL: 0000000
Loaded 51 flash descriptors
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
detected MASTER on COM13, SLAVE on COM14
PDA EROM VERSION: CXC162096 R1A05
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Flash ID check:8964
Flash props sent ok
OTP LOCKED:1 CID:49 PAF:1 IMEI:359315003**** CERT:RED
FLASH CID:49 COLOR:RED
phone model: M600i
part number: FAD-3022012-BV
Phone part version: CXC162037 R9F011
organizer part version: CXC162071 R6A16
CDA part version: CDA162011/2 R6A13
CCPU part version: CXC162098 R6A03
USERCODE:0000

Elapsed: 22 secs.
writing D:\SE tools\FILE FLASH\SE\M600\R6A13_CDA162011_2_ACPU_LL_Generic_Wo rld2.zip
Processing package
D:\SE tools\FILE FLASH\SE\M600\R6A13_CDA162011_2_ACPU_LL_Generic_Wo rld2.zip

detected MASTER on COM13, SLAVE on COM14
PDA EROM VERSION: CXC162096 R1A05
package not contains ISP files
Processing ACPU files
PROCESSING: Core OS
FILE FLASHED OK
PROCESSING: ROFS1
FILE FLASHED OK
PROCESSING: ROFS1 Extension
FILE FLASHED OK
PROCESSING: ROFS2
FILE FLASHED OK
PROCESSING: USERDATA
FILE FLASHED OK
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM13, SLAVE on COM14
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:3593150034****CERT:RED
LDR:060524 0930 LIECXC1325414_DB2000_FLASHLOADER_R1A003
Flash ID check:8964
Flash props sent ok
Processing CCPU files
Flashing:
R6A03_CXC162098_CCPU_fs_LL_NI_Red_CID49_Respin.sof tware
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:160
Will flash 8 blocks...
SSW loading returns:0
Flashing:
R9F011_CXC162037_CCPU_HE_LL_NI_Red_CID49_Respin.so ftware
CURRENT FLASH FILE CID:49
SSW uses complete hash, hash len is:2120
Will flash 106 blocks...
SSW loading returns:0
Processing update files
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
fetched MASTER on COM13, SLAVE on COM14
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:359315003***** CERT:RED
LDR:050926 1419 NPA1CXC1250163_SEMC_FLASHLOADER R2A
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
Trying to launch embedded bootloader...
INT LDR:050810 0923 DB2000_CRIPPLED_PRELOADER_SETOOL2_R2B
Flash ID check:8964
Flash props sent ok
FOUND: R9F011 prgCXC162037_CCPU_HE_LL_NI
Restore from:R9F011 prgCXC162037_CCPU_HE_LL_NI
LDR:DB2001_SEMC_CS_LOADER_SETOOL2
loader startup: executed
loader GDFS startup: executed
Skipping filesystem startup for smart phone
loader unlock: executed
Writing gdfs var 0002:079E len:0053
Success
Writing gdfs var 0002:06D6 len:0001
Success
Writing gdfs var 0002:06D4 len:0006
Success
Writing gdfs var 0002:06D3 len:000F
Success
Writing gdfs var 0000:0094 len:0001
Success
Writing gdfs var 0000:00A6 len:0005
Success
Writing gdfs var 0000:0052 len:0014
Success
Elapsed: 628 secs.

i had the same problem yesterday leaving something to the last minute only come to find 027 does not pick up the smart phone, after wasting an hour i gave up! tried fixed drivers infinite times! today thought go back a version i just went back to 020 and flashed it ! and all was fine.. so realised definitely a bug.. and came to post to let laser and community know and seen people are already having this problem.

i am sure it is been fixed. and await new release...

it is all okay with pda in 027 version. redownload it from support.

sir the_laser, can you post the changelog for Z250 MR2?
thanks

PS: This flash solved reset loop problem... Thanks, the_laser

Its seems everytime the_laser releases another great update, some users simply cannot understand simple instructions such as update from v20 to v28

So for those people who are slow to comprehend things

NEW UPDATE VERSION OF SETOOL v0.914028

Step 1

Download v0.914020 from support site
Move you setool.ini file to a safe place (another directory)
and extract v0.914020 to your Setool Directory

Step 2

Download new update v0.914028 from support site or here
[Only Registered Users Can See Links]

Step 3

Run update v0.914028
Choose the directory name where Setool is installed.

Installer will update setool files with new version.

Step 4

Copy back your setool.ini (this is where your passwords are stored) to your Setool directory.

It really is that simple !!!

I guess CID53 FW can be flashed into CID52 phone using alt bypass?

Hi to Setool TEAM,

We have a suggestion for easy use of setool which every operation
you did and it depend what you want to Do in Repair..

First for Special addons TAB to easy click in repairing CID and Force to convert (CID49/51 to 52 in DB2020)it means TAB for CID tools

Second is in every operation we didn't need having files for uploading or flashing operations..Just click and click operation TAB tools..

I know it is very complicated and impossible suggestion,but i guess it is good for all setool user's...


br: tong

i agree with you sir...
it is not..comparing for the other tool..
but to help the setool user to use it easily.....

and for additional request...can it possible to have repairing corrupted gdfs...

AddOns TAB purpose are easy clicking and click operation TAB tools like CID TAB tools and GDFS TAB tools.

i think time for full Setool update has come why all updates are based on V20

Thanks

i think time for full Setool update has come why all updates are based on V20

Thanks

just wait sir....you see....the laser will release...the booooom update...that waken up the dreamboooooooooooxxxxxxxxx

Because its quicker for the user to download a 6 megabyte file than a 32 megabyte file each time Setool is updated.

Because its quicker for the user to download a 6 megabyte file than a 32 megabyte file each time Setool is updated.

i totally agree you can but both choises and customer can choose

havent tried v028 yet will dl tomorrw but for v027 multiflashing working good now but seems to be limited to 2 phones at a time ? Tried 3 ports on computer and also usb hub but crashed each time more than 2.

BR
;)

usb multiflashing is ok on 027 ... customer tested in ~6 phones in row.
but it is required to use latest usbflash drivers (2.0.0.4 current)

usb multiflashing is ok on 027 ... customer tested in ~6 phones in row.
but it is required to use latest usbflash drivers (2.0.0.4 current)


Where can I get latest usbflash drivers (2.0.0.4 current) ?

Thanks'
BR;)

These days it was noted that full-people who write the firmware not compatible with their phone so without careful if you put an option to avoid this error as the series db2010

Hello

Since the flash files types, versions and cids is very huge and heavy:

Instead of having all flash files on our hard drive,
Could it be doable to host flash files on lan or another distant computer or even on a server ?

So it could be doable to put ftp adress into buffer or even let setool download it gradually prior to flash it ?


BR
Max_B

hi

just wanted to know where old models can be found in setool? e.g T610, T630, T68

kind regards
mmcr

Nowhere ... those models arent supported and never will be

emm actually i use a cid36 phone, my question is about DCU60 falshing support, is this impossible? is very bored to wait for flashing via com, and other free programs support DCU60 flashing.

Grettings

convert phone to red49, use dcu60.

hi

just wanted to know where old models can be found in setool? e.g T610, T630, T68

kind regards
mmcr

hi bro look for terminator dongle i still use this for old se phones bought mine from phantom gsm cost about 25 uk
:D

@the_laser:

Hello!,

Here i would like to ask some features (once more):
- Show flash id as detail as possible:
Fully description of flash id, flash manufacture,and flash size on boot info.
Very useful for those who work with hardware also.
- Every folder for its file, for easier file selection:
Open script, goes to script folder, open gdfs goest to gdfs folder, etc.
Also if possible, for each mobile type has its own subdirectory.
- Built in CDA

@bungle_uk:
thanks for the lesson. I won't be banned TWICE.

best regards

@g-bluez:

i not see sense in any of features.

Hi the_laser


I asked a while ago, if you could incorporate making rest files 'on the fly' when either using identify button, or if the program could build and then load the file into phone during/after unlock or flash procedures! I was just wondering if you would still consider this feature being added?!

This is handy for some files that just arent around, and would reduce then eed for me to d/load tons of rest files and use up my daily limit twice over 2 days!

Thankyou

J

@g-bluez:

i not see sense in any of features.
thanks to you.
now i know, your tool won't be too handy. thats too bad.

thanks to you.
now i know, your tool won't be too handy. thats too bad.

More it will be handy more sunday unlockers will use this and kill the unlock jobs prices !

Once you know how to handle it, you will find it handy enough ;)


BR
Max_B

More it will be handy more sunday unlockers will use this and kill the unlock jobs prices !

Once you know how to handle it, you will find it handy enough ;)


BR
Max_B
hello, tanks m8,

but take a look at kruizer, univerzalbox, dre4mb0x, SEDBx...etc... their directory structures are organized very well. Its not about how to use it, its about comfortable....user friendly, less click, and time save.
Yes, i have not much time just to find out where is my desired files.

But the_laser also made a nice thing for freebies, right?
(those desperate2lite - damn i hate it)

And about the boot that identify flash structure, it will help user to find out the substitude chip for it, if its damaged and need replacement.

those the senses.

best regards,


p.s:
sorry for comparing with others, just for reference and example.

do i force you to use setool2?
no and i never will do it.
use whatever you like : "kruizer, univerzalbox, dre4mb0x, SEDBx...etc" .

but i will implement in setool2 only those features, which i recognize as useful and needed.

setool is a pro tool of sony ericson phone
and the soft devloped par mer lazer et very very good and very esay for use:D
iam very happy wen i using my setool :cool:

i have been thinking about some minor improvements in setool2 friendlyness
can you delete settings main tab and add individual settings tab on each platform/brand tab only enabling select the settings usable for that platform/brand?
just a suggestion

and also plz add Sonyericsson k205a flash files to support

- maybe adding more technical information on diagnostic window
- optional: script to repair damaged gdfs areas for phones like S5oo and W58o (db2o2o)
- optional: script to repair K510 CID50 damaged (unlocked by csca procedure) as u know those phones are quite delicate and suddenly they appear with 0 locks closed

- optional: script to repair k500 damaged (unlocked by csca procedure) as u know those phones are quite delicate and suddenly they appear with 0 locks closed

k500? i think this is a very old phone are u sure about model

I'd say it'll be usefull to add debug log by one click like HWK does

And of course some explanations for users that aren't familiar with it.


Thanks
Max_B

i not see any sense in any of suggested features.

1.


can you delete settings main tab and add individual settings tab on each platform/brand tab only enabling select the settings usable for that platform/brand?


if feature not supported by brand, it is ignored.

2.

maybe adding more technical information on diagnostic window


more? what you need MORE, interface output ?


- optional: script to repair damaged gdfs areas for phones like S5oo and W58o (db2o2o)


in the FAQ.


- optional: script to repair k500 damaged (unlocked by csca procedure) as u know those phones are quite delicate and suddenly they appear with 0 locks closed


k500? by csca ? joke? maybe, you mean w200/k320 ? then again - FAQ.

3.

I'd say it'll be usefull to add debug log by one click like HWK does


hyperterminal exists on every windows installation. if user can't read and can't use hyperterminal, user selected wrong product.

a) about information in diagnostic window: About current GDFS area (if it can be usable for SETOOL operations, for example), if SETOOL can save security area, why cant save gdfs area too?


and.. sorry.. i was saying about K510 (misspelled) CID50
ive hear about too many pieced dead by CSCA unlock

DONT BE MAD...

@tramuyo:

1. there is READ GDFS button to read GDFS.
2. k510 can only be "killed" if user not read FAQ. even in that case, after FAQ reading, user able to revive phone nice and fast.

Hi the_laser


I asked a while ago, if you could incorporate making rest files 'on the fly' when either using identify button, or if the program could build and then load the file into phone during/after unlock or flash procedures! I was just wondering if you would still consider this feature being added?!

This is handy for some files that just arent around, and would reduce then eed for me to d/load tons of rest files and use up my daily limit twice over 2 days!

Thankyou

J


Any thoughts on my suggestion?

Any thoughts on my suggestion?

already discussed cannot be done you need to have the flash file version in order to make the rest file for it

already discussed cannot be done you need to have the flash file version in order to make the rest file for it

Maybe it can't be done with the Identify button, BUT it should be possible to make REST files pretty easy by reading a specific flash region, the only problem we have now is that SEMC will probs change the protection in the flash to different addresses and that - so when reading REST files it isnt forced to be a complete REST file on the protection.

Although this is a theory I could be wrong, if they use the same amount of data and flash addresses in each firmware version then it shouldn't be a problem, I think it would be excellent if we had a READ RESTORE FILE button or something just incase we cant get the files.

it is quite hard to read first bytes of flash files since this region is strongly protected if it would be easy we would have this feature from long ago
and yes if you look at your rest folder for same platform same size of file is used

Your Idea is very good but :

If an easy way to take out rest files on the fly were known,
there would be no need of it anymore :)




BR
Max_B

Question 1
Can we use ssw2rest from SETool2Lite to make rest files for SETool2?
(from uncrypted main files)

Question 2
I Wonder if this possible to add EROM version @ Identify

ssw2rest will work for db2020/pnx5230/db2012.

Hello

There is some problem in flashing PDA phones, it is not every time the setool won’t to start flashing, and the setool keep searching after the phone...

But if we restart the pc then it will work for only one phone and then if we wont to flash one more phone then we have to restart the pc again...

I say that it is from the last version because I have tested old version without any problem.

Hope laser wil fix it in new version...

Tank.

i flashed p990 phone 4 times per row.
no problems.
so - nothing fix.

just in case, redownload and reapply update from support.
setool2g.exe file size should be 3*517*952 bytes.

i flashed p990 phone 4 times per row.
no problems.
so - nothing fix.

just in case, redownload and reapply update from support.
setool2g.exe file size should be 3*517*952 bytes.

Hello Laser...

It is not my first use whit SEtool i use setool about 150 time every day to flash phones...

Yes there is error in the latest version... did you try to flash P1i ore M600 it is those 2 phones I have problem whit...

And if I use old version every ting work okay...

@chouchou:

absolutely ALL PDA phones using SAME WAY.
but specially for you, i have flashed 4 times IN ROW P1i phone.
and there is NO SINGLE PROBLEM.

do you know what it means ?
right, there is NO ANY SINGLE BUG IN LATEST SETOOL2 with PDA phones.

@chouchou:

absolutely ALL PDA phones using SAME WAY.
but specially for you, i have flashed 4 times IN ROW P1i phone.
and there is NO SINGLE PROBLEM.

do you know what it means ?
right, there is NO ANY SINGLE BUG IN LATEST SETOOL2 with PDA phones.

Okay tank laser...

I dont now why i get this error, but its good i can use old version..

Tank...

are you SURE you have CORRECT setool2g.exe with filesize EXACTLY 3*517*952 bytes ?

are you SURE you have CORRECT setool2g.exe with filesize EXACTLY 3*517*952 bytes ?

Yes...

And i use version 20 and update it whit the latest one...

no idea then. most intresting, that pda part is not changed looong time....
can you record video of yours problem?

Hello Laser

What would you think about building and runing a database of secunits ?

If each setool user would send identified phones to you with logs :
DB2020, DB2012, A2, all ...

To go further to unlock more phones or make such things like calculating kind of ask to rpl files to rebuild damaged gdfs ?

So would it be helpfull to you or not ?


BR
Max_B

well, all signatures are stored on servers.
or you talking about recording on servers security units of each phone?

Hello Laser

What would you think about building and runing a database of secunits ?

If each setool user would send identified phones to you with logs :
DB2020, DB2012, A2, all ...

To go further to unlock more phones or make such things like calculating kind of ask to rpl files to rebuild damaged gdfs ?

So would it be helpfull to you or not ?


BR
Max_B

aha......
nice idea, calculating gdfs via server...
if that possible we can repair gdfs without test point..

br,
kevin168

Yes recordintg secunits of each phone just for you to compare it all.
The goal is to make this helpfull for each setool user in the end.

Whether people could send this to you by email or to implement a function in setool to upload it with identify log details directly for research.


BR
Max_B

Hi Supporters

i know that there is a Scrpit to reset call timer but i wonder it will be too easy if we make this option as Button (i have attach pic )

and same for change CID Also (easier for new users and faster )

thanks in Advance


PIC Attached

Hi Supporters

i know that there is a Scrpit to reset call timer but i wonder it will be too easy if we make this option as Button (i have attach pic )

and same for change CID Also (easier for new users and faster )

thanks in Advance


PIC Attached

the_laser will say "that already exists, but as a Script"

I think this is a good idea but I dont know if the_laser will add it

press flash and ¡¡¡ this error, then press ''ACEPTAR'' and continue this flash ;)

update setool2 and all will be fine.

update setool2 and all will be fine.

its UPDATE.... version 28. :confused: ¬¬

Reinstall 020 and upgrade again

@ mods & admins: don't erase my posts, pls. If there is a problem, tell me via PM. is that Ok?

@ addier: try to visit windows update page and check if ur windows install have a old component or DLL

it has nothing to with os, just install latest setool2lib.dll library file

@tramuyo:

please, read first post of that thread.
i WILL delete ALL unrelated (as i think) posts from that thread without ANY warning and ANY explains.

that thread is ONLY and ONLY for setool2 program BUGS and RECOMMENDATION.
i not want read here any "i want firmware xxx, i want rest xxx, i can't update setool2, etc" questions.

that is my first and last warning.

RECOMMENDATION...

mmm
if not hard work to you make reset call timer and upgrade cid in sw window
i think that setool will be more beautifull with some new function in main window....

RECOMMENDATION...

mmm
if not hard work to you make reset call timer and upgrade cid in sw window
i think that setool will be more beautifull with some new function in main window....

[Only Registered Users Can See Links]

Have script maker to download in video tutorials site section :cool:

sir the_laser, maybe i'm doing mistakes or we have a problem in v0.914029.
i tried to identify using new alternative bypass with a W300 - R4GG001 - CID52, there is no restore for while...
then i got:
Restore from:R4GG001_CXC1123260_GENERIC_JE
can't open file "D:\SETOOL\v0.914029\rest\R4GG001_CXC1123260_GENERI C_JE"
Elapsed: 12 secs.

then my phone was blinking white... i restored flashing MAIN using signed mode.

it's not possible do unlock via patch while flashing MAIN because we don't have restore file for this.
But I'm trying to flash main... there is no need of restore file if i'm flashing MAIN. Or am I wrong?

Thanks!
This if full logs...


SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FLASH CID:52 COLOR:RED

Model:W300i
MAPP CXC article: R4GG001 prgCXC1123260_GENERIC_JE
MAPP CXC version: R4GG001
Language Package:AMERICA_2
CDA article: CDA102499/110
CDA version: R5A
Default article: cxc1123203
Default version: R4GG001
PROVIDER: 724-05
Network LOCKED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R4GG001_CXC1123260_GENERIC_JE"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 6 secs.
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Will backup GDFS now.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
LDR:070410 1405 HANCXC1327364_COMPACT_SEMC_CS_LOADER_1_R3B009
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM18
PHONE READY TO PROCEED
CAN'T START EXECUTOR,RETRYING...
EXECUTOR STARTED

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
HOLD "C" BUTTON AND ATTACH AGAIN

bypassing security...
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
Flash ID check:897E
Flash props sent ok
FOUND: R4GG001_CXC1123260_GENERIC_JE
Restore from:R4GG001_CXC1123260_GENERIC_JE
can't open file "D:\SETOOL\v0.914029\rest\R4GG001_CXC1123260_GENERI C_JE"
LDR:COMPACT_SEMC_FS_LOADER_SETOOL2_V26
loader startup: executed
Loader refused to start GDFS services,error is:29
failed, that is fatal
Elapsed: 147 secs.
PRELOADER SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed: 3 secs.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed: 4 secs.
PRELOADER SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FOUND: R4GG001_CXC1123260_GENERIC_JE
Restore from:R4GG001_CXC1123260_GENERIC_JE
can't open file "D:\SETOOL\v0.914029\rest\R4GG001_CXC1123260_GENERI C_JE"
Elapsed: 10 secs.
PRELOADER SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FLASH CID:52 COLOR:RED
set_gdfs_props failed, exiting
Elapsed: 4 secs.
PRELOADER SECURITY BYPASS ENABLED.
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:COMPACT_ID_LOADER_CRIPPLED_SETOOL2_R2
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
FOUND: R4GG001_CXC1123260_GENERIC_JE
Restore from:R4GG001_CXC1123260_GENERIC_JE
can't open file "D:\SETOOL\v0.914029\rest\R4GG001_CXC1123260_GENERI C_JE"
Elapsed: 12 secs.
SIGNED MODE (USING SERVER).
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35295200000000 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
Flash ID check:897E
Flash props sent ok
writing D:\R4GG001_CXC1123260_JE_RED_CID52.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:6740
Will flash 337 blocks...
SSW loading returns:0
Elapsed: 185 secs.

first, there IS restore file present for that firmware.
next, as i wrote in FAQ, if you not have rest file, you can use combo flash+unlock_after_flash

first, there IS restore file present for that firmware.
next, as i wrote in FAQ, if you not have rest file, you can use combo flash+unlock_after_flash

sir, i tried to do this, like unlock via patch with fullflash on CID51, but the process hangs saying me there is no rest.

FOUND: R4GG001_CXC1123260_GENERIC_JE
Restore from:R4GG001_CXC1123260_GENERIC_JE
can't open file "D:\SETOOL\v0.914029\rest\R4GG001_CXC1123260_GENERI C_JE"

I checked in JE folder at FTP yesterday and there was no my rest file.
Today the file is there "new" :)
Thanks, sir!

I duuno whether u guys found it yet or not... but if i'm using winXP, login to the support site is no problem, but the problem came when u use winVISTA... it can't login and says "please login trough the SOFT"...

i face this problem after flash when i try to make identify (specialy on Z310i )

12:27:01 Speed:460800
12:27:01 ReadOTP failed, exiting
12:27:01 Elapsed: 6 secs.

Hope Solve it in next Release Mr.Laser

Br.Jr90

that, and all bugs are solved in new version: V30
just go to SETOOL UPGRADES and check it out

I have some troubles, pls help me.
I know that with new version and new method, only phone which has supported firmware can be unlocked.
When we have phone with FW supported, I unlock well phone but after that I want to change langpack and my phone's langpack is not suitable with supported FW such as vietnamese language (include in APAC FW).
How can I do to change language in this stituation?

you can write any cid firmware via altbypass method.

i think this rest file is corrupt or something wrong R4GB001_CXC1250725_ORANGE_ME can you check upload it to support. Pliz help with this rest file its there in rest folder as a zip file but still same error

Just copy to REST folder. DO NOT TRY TO OPEN THE FILE !!!

Just copy to REST folder. DO NOT TRY TO OPEN THE FILE !!!


SR.

i cant find this rest. Since I copy the file IF I do not have it The Sun I need to know where the "rest" download.

Or that explain to me if them db2020 do not use rest

thank and :(:(sorry

Just copy to REST folder. DO NOT TRY TO OPEN THE FILE !!!

maybe my 2 computers have problems because this file is already in the rest folder i never tried to open it check log:-

v0.914030/UNI
CARD SERIAL: 00024527
Loaded 51 flash descriptors
Can't load ID loader !
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY MODEL DETECTED

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Flash ID check:2019
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35xxxxxxxxxxxx CERT:RED
FLASH CID:52 COLOR:RED

Model:W200i
Brand:Orange
MAPP CXC article: R4GB001 prgCXC1250725_ORANGE_ME
MAPP CXC version: R4GB001
Language Package:ORANGE_GEN
CDA article: CDA102738/71
CDA version: R9A
Default article: cxc1250728
Default version: R4GB001
PROVIDER: 234-33
Network LOCKED

USERCODE:0000

RESTORATION FILE NOT PRESENT
"R4GB001_CXC1250725_ORANGE_ME"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 29 secs.

of course i can flash with other version and unlock but most of the phones i am getting need this restore file PLEASE HELP

do not mess REST FILE wile BYPASS PACKAGE.

New versions after v028 little bit more confusing, takes more thinking to learn :D ... was gonna complain as it was a bit annoying getting used to new settings with all settings moved all over the place- specially for user who uses alot and goes in and does manuall changes to setting all the time....

...BUT.. hehe it is actually an advantage. heheh;) as it only takes a bit of reading and requires som thinking. Since many shop cant seem to do that they dont know how to do and cant do which in turn generates more for professional shop who knows how to do.

So... conclusion is Thanks @the_laser and anyone else who deserves and for people to start READING and use brain - if not leave to those who can ;)

BR;)

@the_laser: Is it possible to add auto-deletion of executor java app after unlock procedure is completed?

I know i can make script myself, but i think 99 of 100 users want the app to be deleted, so it's better that 1 person makes script to KEEP the app, than 99 people using script to delete the app.

Btw, is this new bypass mode not possible on CID51? Or did you just not bother to implememt CID51 support since most phones now are CID52+?

@the_laser: Is it possible to add auto-deletion of executor java app after unlock procedure is completed?

I know i can make script myself, but i think 99 of 100 users want the app to be deleted, so it's better that 1 person makes script to KEEP the app, than 99 people using script to delete the app.

Btw, is this new bypass mode not possible on CID51? Or did you just not bother to implememt CID51 support since most phones now are CID52+?

He already sad this

i will not do anything about auto-erase executor. perhaps, will make script for it, but that all, no any "automatic remove"

New procedure is only for CID52 and CID53 phones

@the_laser: Is it possible to add auto-deletion of executor java app after unlock procedure is completed?

I know i can make script myself, but i think 99 of 100 users want the app to be deleted, so it's better that 1 person makes script to KEEP the app, than 99 people using script to delete the app.

I was just going to ask this... to be honest it would be better if it's removed automatically. I know it doesn't take too long to remove it, but if I forget to do it the next thing will happen is the client wants to play "executor" and after that he will end up with a "dead" phone...

BlickBox, please post the script if you finally decide to create it, or please somebody point me the direction to make it myself.

Thanks

script attached. Tested on W200i

Don't know why, I had to use this one on a K810i as the filename for executor was not the same...

I was just going to ask this... to be honest it would be better if it's removed automatically. I know it doesn't take too long to remove it, but if I forget to do it the next thing will happen is the client wants to play "executor" and after that he will end up with a "dead" phone...

BlickBox, please post the script if you finally decide to create it, or please somebody point me the direction to make it myself.

Thanks

[Only Registered Users Can See Links]

:cool:

i will not do anything about auto-erase executor. perhaps, will make script for it, but that all, no any "automatic remove"
Ok, but i don't understand why not... He already added automatic installation, so why not automatic deinstallation also? Especially since it's very "dangerous" if we forget to delete it manually.

Guess i have to change all customization packages manually then, to remove it.

One final question: SE can fix this Java exploit in a simple firmware update? Meaning, they don't need to release a new CID version, they can simply fix it in the next firmware for all phones?

@blickbox:

SEMC CAN and WILL fix that exploit with simple firmware update.
btw, it has nothing to do with Java.
but, as long as CID not changed - you can always downgrade phone to supported firmware and do required operations.
of course, you can buy dre_ambox and not care about firmware.
but, in time which required to do one phone with testpoint and damage every possible warranty, your competitors will do >=30 phones with software ;)

@the_laser:
how to do vkp patches with new alternative procedure?
I got errors:


.................
DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT
PHONE FOUND AT COM13
PHONE READY TO PROCEED
EXECUTOR STARTED

REMOVE CABLE FROM PHONE
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
THEN PRESS "READY"

bypassing security...
ChipID:9900,EMP protocol:0301

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:52
Speed:921600
Trying to launch embedded bootloader...
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
Flash ID check:2019
Flash props sent ok
SEARCH TIMED OUT
SEARCH TIMED OUT
Nothing found,use manual selection
Starting to process VKP patch script: E:\16.SETool\Firmware\Z\Z610\VKP\10.acoustic_path. vkp
VKP script loaded OK. Lines: 7
Patch structure created OK. Determining blocks to read...
New block #0000 added: $45A00000
New block #0001 added: $45A80000
Blocks selected OK. Reading blocks: 2
Block @ $45A00000 read error. Have only: 00000000 bytes


Elapsed: 356 secs.

looks like phone got disconnected during restoration processing. repeat procedure.

looks like phone got disconnected during restoration processing. repeat procedure.

finally, we don't have to flash main file for only doing vkp patches, great! thx a lot

@ the_laser ,
k800 cant be detect during perform patch IMEI prcedure . ( other models done without any problem )
all drivers installed correctly ,sim inserted and phone completely truned ON,...,etc
check it please or tell us what is the reason .

@matin-gsm

...
2008-05-17 13:59:01 DISCONNECT PHONE NOW
2008-05-17 13:59:01 INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
2008-05-17 13:59:01 BE SURE THAT YOU SET PHONE IN "PHONE MODE"
2008-05-17 13:59:01 IF ASKED, INSTALL PHONE DRIVERS
2008-05-17 13:59:01
2008-05-17 13:59:01 SEARCHING FOR PHONE, "STOP" TO ABORT
2008-05-17 14:03:40 PHONE FOUND AT COM34
2008-05-17 14:03:46 PHONE READY TO PROCEED
2008-05-17 14:03:52 EXECUTOR STARTED
2008-05-17 14:03:52
2008-05-17 14:03:52 REMOVE CABLE FROM PHONE
2008-05-17 14:03:52 REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
2008-05-17 14:03:52 THEN PRESS "READY"
2008-05-17 14:04:03
2008-05-17 14:04:05 bypassing security...
2008-05-17 14:04:11 ChipID:9900,EMP protocol:0301
2008-05-17 14:04:12
2008-05-17 14:04:12 PHONE IS RED RETAIL PRODUCT
2008-05-17 14:04:12 FLASH CID detected:52
2008-05-17 14:04:12 Speed:921600
2008-05-17 14:04:12 Trying to launch embedded bootloader...
2008-05-17 14:04:13 INT LDR:DB2020_PRELOADER_FOR_SETOOL2
2008-05-17 14:04:13 Flash ID check:2019
2008-05-17 14:04:13 Flash props sent ok
2008-05-17 14:04:23 FOUND: R1JG001_CXC1250210_GENERIC_WI
2008-05-17 14:04:23 Restore from:R1JG001_CXC1250210_GENERIC_WI
2008-05-17 14:04:33 Searching...
2008-05-17 14:04:36 IMEI handler determined.
...
2008-05-17 14:05:34 Elapsed: 433 secs.

thank you my friend but always i got

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

SEARCHING FOR PHONE, "STOP" TO ABORT

thank you my friend but always i got
then power on the phone and put original simcard and go to .... Read the FAQ :cool:

i know i'll get into trouble for asking this but do i have to extract the bypass files for the software to pick them up or not?

You don't - just paste them into your REST directory

I can't flash LG 8130 on v.0.914031 - v.0.914033. :confused:
v.0.914033 don't want to accept *.cry files on LG tab!

Finally I used with succes an old version. v.0.914021

It's possible to be bug!?

Can anybody to confirm that?!

Nope, working perfectly

@bungle_uk

Please try with files like *.ssw.cry!

Indeed with *.ssw, *.cry, *.ssw.bin.cry works! :)

Hi, i get a problem, after phone dead by executor, with 032 and previous ,just check enable preloader and signed mode, unlock and phone live again, now we have to flash main and do all process again, can you implement that in new version again?

I today unlock Z310 and W200 by new bypass method and is easy.
Privjet Laser and big Thanks.

Just one thing, on bypass package on server which are in archive, you can unzip it, but when enter inside this folder and try to unzip some file from inside, is not possible.
Can some admin correct this. Thanks

@renzox:

you incorrectly read FAQ. re-read it,please. note word "ONLY".

@ciux:

hallo,ciux. one thing - you don't need unpack bypass packages. just unpack archive with them into rest folder. bypass packages is xxxxx.zip, but it is not .zip.

please read carefully..
i add it already..
:D:D:D

SEARCH:D:\TEMS PRODUCT\k800i\R2A\R2A_CXC1722434_K800_TEMS.ssw
RESTORATION FILE NOT PRESENT
"2007-05-29_07-05-29 18:33 CXC1722434_TEMS"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

br,
kevin168

by the way, is it possible in new version to readfile by writing script or not?

@kevin168:

tems is specific firmware, it require special algo of version detection.
as it appear ONLY in tems firmware, i will NOT do ANYTHING for it.
select restoration file manually into "rest file" area.

@aslani80:

full script command support available in alternative bypass mode only.

Hello the laser, and forum people.

My suggestion is to add bypass package detection when identify DB2020 or DB2012 not CID52 or CID53

For example, when i do an identify for a W710 CID49, i don't receive information about bypass package, i have to check firmware info and search for bypass file in the rest folder...

It's because there is a new bypass unlock method for these CID's

Thanks in advance.

how about checking FAQ?

highlight words "MUST","ALSO","use preloader"....

Hello, Mr. the_laser ~

W950 can write empty plate information ?
SETOOL SUPPORT?

thank you

pda emptyboard filling not supported by setool2.

@the_laser:
how to perform "old" alternative bypass in 0.914034? use old version?

@the_laser:
how to perform "old" alternative bypass in 0.914034? use old version?

You cannot. Look forward man, not backwards

@bungle_uk:
although new alternative bypass is faster, setool does not provide all bypass package. that's why old alternative bypass procedure is still usefull.
I think you never handle with vkp pathches for all versions.

Good luck unlocking DB2012 for free using old alt bypass software

setool2 provide bypass packages for all latest version.
next, there is bypass packages request thread.
finally - my lovely words - don't like it - don't use it

just forget about old way. it is in past. now we have new way, get familiar with it and use it.

why u want upgrade cid mate when all cid's free and direct unlock able so just use new ver that's easy for u and also time save :)

i know its free unlock, but i want to upgrade language only, i just want apac language but setool support site doesn't have apac variant but its only have s_asia_levan this variant is not apac language, i just want to update the language, cid53 has apac language thats i want to upgrade latest cid53.

when you using alternative bypass, you can flash cid1,2,3,4,5,6,7,8,9,10,etc firmwares into cid1,2,3,4,5,6,7,8,9,10,etc phones.
if you want cid53 - press recovery.

.....
if you want cid53 - press recovery.
does it apply to db2012/2020 cid52 phones?

no.

It would bo very good to add big letters reminder witch jump up after patch unlock
:):) REMOVE EXECUTOR FROM PHONE:):)
or rewrite executor to self deleting after it is used to unlock.

never will be done.
if user don't reading FAQ, he should use other tool or not repair phones at all.

when you using alternative bypass, you can flash cid1,2,3,4,5,6,7,8,9,10,etc firmwares into cid1,2,3,4,5,6,7,8,9,10,etc phones.
if you want cid53 - press recovery.'

Not working. Can not find qualified part.

then stay on cid52 and use altbypass.

W300 DB2010 CID49 Imei change dont work, all looks good but imei is the same when pres *#06#. Problem with version 0.914034. In 0.914029 all works great.

BR ROpa

no, it is you who doing that operation wrong. imei change working well for all supported phones.

'

Not working. Can not find qualified part.

use with care! (signed mode only and write as script)

Eerchant

Hallo. What about displaying & selecting active com-ports in Interface? Active com ports - com ports that are present in Windows for that time when i'm using Setool.

Sorry for my English :)

maybe that will be done. but, honestly, not see any use in it.

About K200 FS Files SAMSUNG_0x01800000.arm and SPANSION_0x01800000.arm, they don't work.
When flashed in phones only appear at *** File System: Invalid File System.

you need flash phone after them.

i thought that file were entire FS...
then i need flash phone after flash that file... need i apply fullflash or only flash?

thanks

if you applied fullflash, then what need of that files ? ;)

if you applied fullflash, then what need of that files ? ;)

the_laser, i thought that files could solve "can't take pics" problem, but it can't. i tried to flash that files in k200 problematic phones, but i only get what i said previously.
then i used fullflash + latest k205i flash, but i don't know if it will solve the problem.
but a lot of phones get back the problem after some days and the customer say: "this problem happened after unlock".
but you said me that is not unlock related problem, cheap phone have cheap components and more faults, but some phones are OK for months and get the problem after unlock
you said me too that is no problem with unlock method and you will not make other unlock(patch unlock, for example).
can you explain how to use FS files correctly??:o


edit: for example, a friend bought OPEN(non branded) k200/k205 and no single one have this problem until now, but the most(or why no says "all") unlocked phones have this problem.

k200/k220 unlock method is absolutely okay and without any problems.

"save picture" faults is known problem and it is fixed in MR3 versions of k200/k220 software.
if phone not experience problem - it MUST be simple flashed to MR3 software.
if phone experience problem - it MUST be flashed with corresponding filesystem and THEN it MUST be flashed with MR3 software.

k200/k220 unlock method is absolutely okay and without any problems.

"save picture" faults is known problem and it is fixed in MR3 versions of k200/k220 software.
if phone not experience problem - it MUST be simple flashed to MR3 software.
if phone experience problem - it MUST be flashed with corresponding filesystem and THEN it MUST be flashed with MR3 software.

Thanks, sir, i'll try to do like you said.

Other question, copycats already copied you java method. I thouhgt about a fast method: copy executors to a MS card to jump the first step.
Is this possible?

Thanks again

first, it is NOT "java method".
it has no any relation to java bugs.
method,based on java bug, will be released when semc will up CID to cid80.

second, security holes is not protected because of their nature.
once security hole released on public, it became public property.

so if pitiful programmer from mizerable kukuruzer "team" can't think himself - let he steal.
everybody in gsm already knows , who is master and who is copycat.
(gti team ,at least, stoled only executor, but not absolutely all, as mizerable fleas done.
also gti honestly said "thanks", but not shitty lies as mizerable kukuruzer fleas)

and no, it is not possible to make anything faster in "new altbypass"

Yepp, would be nice with a built in delay or a "tp delay=0" (20,30,50) that we can change to our needs in the setool.ini file.


about new method with test point,
request for autostart TP operation, i mean just give some delay about 15~20 sec
after that operation start automaticly,

so we don't need to press "ready" button several times,
sometimes make hard to push "ready" button when workin alone,
:D:D:D
coz we just have 2 hand's
hehehe......

hope can be implemented in next update..

br,
kevin168

i will think what i can do with that.

what will be happen if i use wrong tp?

in 90% cases you will get error message.
in 10% (depends what and how you connected) - you will utterly kill phone.

Regarding Z550 and other abnormal fones without CID52 files in support, if OTP CID is = 51 and CID51 is available in support...

db201x abnormal CID52 phones Z530,Z550,W810 - NO CID52 firmwares.

...in case of phone dead thru aborted flashing, wrong unlock etc...

because of that, one mistake with that phones - and you get deadweight.
you have been warned.

...new update gives new light to resurrect these fones.....of course thru TP repair(db201X) on new Setool GUI...

7. now flash CORRECT db201x erom with needed CID.
NOTE, THAT EROM CID SHOULD BE >= OTP CID,OTHERWISE YOU WILL GET DEAD PHONE.
10. phone now retail,repaired and unlocked. fullflash phone as usual.

mr the_laser,
in brazil we hava a lot of z530 cid51 with R6GA004 firmware, that cannot be found to creat rest file.
is there any way to create restore file using an dre_ambox fullflash?
thanks

you can make readout using testpoint start 44140000 len c0000
then rename file and put it in rest folder

Laser would you considering improve or maybe repair the k220 and k200 ODM connection problem??? I really have a hard time of connecting those phone. other member would agree.

(FYI: The Infonity box can connect smoothly... just the best semc tools ever now have hard time.)

Please take a look, i know you are busy.. just take a look...

there is no single problem to connect k220/k200/j110/j120/z320/t250/t280/etc phones.
all problems comes from your cable.
all i can advice - take sticky tape and put it on ignition pin (rightmost pin).
then press "power on" manually.

i will think what i can do with that.

N we need good update soon for db2012 with error gdfs structur n Testpoint sensitivy like 50% - 100% for more actual testpoint method .to hard testpoint with setool.:(

weird ;)
well, use other products. setool2 will not add anything more to current testpoint implementations.

there is no single problem to connect k220/k200/j110/j120/z320/t250/t280/etc phones.
all problems comes from your cable.
all i can advice - take sticky tape and put it on ignition pin (rightmost pin).
then press "power on" manually.

DO'oh. . . . . :confused:

I already try all method laser. it only happen with k200 and k220 only not all of odm. all other is okay and can connect and do all operation smoothly. trust me only k200 and k220.

when i push the power button the phone power on it self and not booting like the usuall.

It can connect smoothly in previuos version. with the same 4 cables. with the UFS.
Now Suddenly It cannot connect no more, with the same 4 cabbles or with UFS. (as the version 38 emerged problem exist)

UFS is problem also??

could you fix or improve your se tool?? please hear our complains. it is only problem arise we complain. why would we complain for fun.

thanks laser for listening.

i had tested k220 booting and found no problems.
it boots normally with ufs or with com.

just connect phone when software will tell you so, not before.
in any way, several battery remove/insert will do job.

i had tested k220 booting and found no problems.
it boots normally with ufs or with com.

just connect phone when software will tell you so, not before.
in any way, several battery remove/insert will do job.

thanks laser for the fast reply.

now i have concluded the problem maybe from my pc, but my other friends also has such problem. many.

very very strange behaviour.

good luck...

k200/k220 booting is tricky, if ignition pin is not masked with tape.
but i can always boot them such way:

connect phone with removed battery, then execute operations and quickly insert/remove battery until booting starts.
not hard to do at all.

sir, can you make a FFS erase file for Z250i? Like you made for T280i...
I tried with it, but phone can't start...
Tried flash it, but it hangs after logo.

Thanks again!

k200/k220 booting is tricky, if ignition pin is not masked with tape.
but i can always boot them such way:

connect phone with removed battery, then execute operations and quickly insert/remove battery until booting starts.
not hard to do at all.

Tested, on my PC version 38 and 39 cannot boot the k220 and k200, but i acquaired version 35, k200 and k220 boot smoothly and kick ass. :D

now downloaded version 40, but asked a virgin v38, but already patched to 39 so cannot install, so strange why don't make it 39 to 40? to make our life more easier. :D

Updates:

Setool kicking ass in 40 k200 and k220 works well,
for the installation just copy the PatchWise.bak\ to the original directtory and just enjoy..

Laser you are kicking ass in semc world. :D

GOod Luck..

Latest version of SETool will not unlock M600 old version, comes up with an error I have not seen before, a box pops up with Cannot Find Resource! and when you click OK SETool closes. Unlocked now with version 37, is this a bug ?

yes, that is bug. thx for report.

Not really a bug, but more of a slight request.

When unlocking A2 phones can this:

DISCONNECT PHONE, FULLY TURN IT ON AND ATTACH AGAIN.
BE SURE THAT YOU SET PHONE IN "PHONE MODE"
IF ASKED, INSTALL PHONE DRIVERS

be changed to something along the lines of

DISCONNECT PHONE, REMOVE SIM, FULLY TURN IT ON AND ATTACH AGAIN.
CHECK PHONE DISPLAYS 'INSERT SIM'
IF ASKED, INSTALL PHONE DRIVERS

May possibly solve alot of the commonly asked question of A2 phones with Insert Correct Sim on second part of unlock.

request acceptable.

request acceptable.
swap gdfs button will help also in many case..
and safe and secure if its specially design for do swap.. many newbie just killing there phones without proper backup..

scenario should be like button name swap gdfs or repair gdfs with swap method.
backup sec zone first
rewrite default gdfs
restore sec zone

swap gdfs finish.

sorry if this idea was already given....
well, what about one button to download all required files for phones
it would be great....
one button and you donload files needed for your phone...

is there any possibilty to make setool custom loader for marita respin cid49?

tell me what you want exactly?

For some days I was thinking to have some colors in Setool window:
For example when some one presses identify button: The information about
OTP CID 49 should show up in bold green color, Flash CID 53 in bold red color, Software version in bold brown color.

The advantage will be that it will be very easy to read just the required information for phone just with the help of color.

what do you people think???

I like it.... but the firstone i dont like it so mucho cause affect my vision :S may be it would be much better if you find another green color :D

Lets read what laser says ;)

Dam good idea even if they were bold we can see easy

tell me what you want exactly?
i want to flash db2012 with otp cid49 fitted on it :cool:

- want to see what cid of the firmware i load on sony ericsson tab. like my post here ([Only Registered Users Can See Links])

usage report:
* setool wont start IF:
- infinity suites is running
- kruizer zuitez is running
setool must be loaded first, before those suites.

@g-bluez:

sorry, there is no situable loaders for db2012 cid49 phones. actually, such phones should never exist.

about other tools - i just run

1. kukuruzer unlocker
2. infinity module
3. setool

all 3 programs see their dongle and working.

Please add a warning box dialog like "This procedure will consume crdit.Continue?" when we use unlock without "alternative bypass" checked.

will setool allow the firmware usage of EMMA original format?
add some kind of converter perhaps?

crypted emma firmwares not supported.
plain emma firmwares supported only for pnx5230,db2xxx,db3xxx.

there is a plenty convertors, but not for public. you can buy one on gsmcity forums.

Are you using Themida to protect setool?
Cause it gets detected as virus on Nod32

[Only Registered Users Can See Links]

uninstall nod32 and use normal antivirus, for example: [Only Registered Users Can See Links]

With Locosto phones function unlock after flash not working ;(

no, unlock after flash option perfectly working for ODM phones.

actually, i dont know what is the purpose of writting full flash dump from other phone.
but as i know, it is good for INSTANT repair.

well, since setool do TP repair on db2020 and alt.sec.bypass,
how to read full ssw on db2020?
is all the phone type have the same length?
since their nor chip use the same type? (all db2020/2030)

no, unlock after flash option perfectly working for ODM phones.

in 39 ver after flashing not unlocks... I have tested on 130 phones last night..

current public version is 041.
i do not care about any of previous version.
in current public version "unlock after flash" option working just nice for odm phones.

current public version is 041.
i do not care about any of previous version.
in current public version "unlock after flash" option working just nice for odm phones.

maybe U can make setool software update via internet directly ? e.g. U release new version and when I using setool, program informs me about updates and notification has button "update now". Including newest rest files etc.. and maybe many stupid questions will not be asked..



sposibo za vnimanie ;)

no, don't like that.

@the_laser

i got one T303, brand new, DEAD.

the story: phone was working OK, but locked.
someone played with it and killed it.
tried ReFlash, clean_FS file, even found original security area,
but still dead.

some repair flash please ?

tnx.

find t280 boot repair file, i posted it at least twice. also, it is not proper thread for such kind of questions.

@the_laser

i got one T303, brand new, DEAD.

the story: phone was working OK, but locked.
someone played with it and killed it.
tried ReFlash, clean_FS file, even found original security area,
but still dead.

some repair flash please ?

tnx.


find t280 boot repair file, i posted it at least twice. also, it is not proper thread for such kind of questions.


Direct download link:

[Only Registered Users Can See Links]

need something new, regarding erom upgrade. sometimes all available script dont work.

Flash props sent ok
EROM UPGRADE CAN'T FIND QUALIFIED PART
Elapsed: 5 secs.

and what ? that is normal.

:confused:
i cant make upgrade, and thats normal?
what is the meaning of EROM UPGRADE CAN'T FIND QUALIFIED PART anyway?
what part is missing?

qualified one.
you can always use altbypass to make cross-cid flashing.

[QUOTE=the_laser;448969]
6. set desired domain ("retail" is best choice)
QUOTE]
which 1 is "retail"

PRODUCT
R&D
FACTORY
CURRENT

thanks
br

I can tell you which ones Retail is not.

R&D not Retail
Factory not Retail

Process of elimination leaves Product.

Mr. the_laser, can you say anything about patching A2 platform...
It will be or not?

and.... i'm don't mean imei change... only patching.