Plz add sagam phone


like my600x unlocking???

IMO, that u-name, should be banned. Just add's confusion with people not reading it properly.

in fact, i deleted him, but he relogon again. searching how to add "forbidden" names.

This usually needs admin right in vb forums.
But, why not just ban such names, they will neither be able to login nor can they choose the same name again ;)

a friend have a w302 with corrupted trim area by "Kuku" team.
How to recover it using the latest version of setool?
Thanks, mr the_laser

recover is simple, all is need - write correct trim area.
sadly, s1 signature server is offline at the moment, while it required to recalculate security zones.

in any case, kukuruzer doing some kind of backup during phone boot - they put it somewhere in %appdata%\kukuruzer or smth like it.

please check that location and get backup. we will try to construct security zone.

t303 s1 model is free with new update at the moment?

The question is > this beta test for s1 is valid until when?

maybe a little input before you put the price tag on the recently credits your working of..

d2XXX phone price is to cheap now laser, I don't expect the repair gdfs will cost credits, because the flash ic is cheap also. many ppl hear about the price of repairing the gdfs by credits scared away.

I also understand that you work your ass off for this kind of solution. but the solutions just come very late. as the price of the db2xxx drop down to earth.

and if you put a price tag on gdfs repair, we as phone technician often put ourself in gambling situations, as some time the credits solutions didn't works, or the phone don't repair correctly, thus we as phone technician losses credits and suffer. thus they prefer the dream box test point solutions (SETOOL also have but dreambox performs better)
which cost nada.honestly says.

just some inputs for you hope you listen and felt our sorrows as SEMC phone technician.

Good Luck...

The question is > this beta test for s1 is valid until when?

yes answer this

Br..

@irpaj:
so, you claiming that change flash chip is much more simple from side of cost and work than pressing ONE button and pay small amount of money ?
very funny post. about testpoints too - very funny.


@others:
beta test period will ends when i decide to do so.
one day, one week, one month....

I hope it will be a small amount, laser... :D

the funny post scenario is just like this..

the point is, until i get the phone repaired perfectly there is no guarantee i got money from customer.

that's what i mean the gambling position.

If i use credit - payed, bang reset the phone etc.... and the end result still not resolving the phone problem or have other problem = I don't get money and i lose money in credit taht i already payed online. no profit but very simple way of repairing.

If I use the flash IC, work a little harder, if the phone don't work perfectly i can still use the IC to the other next phone. that result in i don't lost money. so that i still can be profits not lose.

If I use the test point, I have zero risk of losing money. hope you understand my funny post. since you are the man behind the curtain. and we are the dude that feeding the family and children.

The phone that come to repair is not like what you think sometimes it's pretty wrecked and destroyed.

GOod Luck...

when you getting phone for repair, take small amount of money, not more than 5-10$ for "determine phone initial status and repair cost analyze".

that is normal practice in most service centers.

such way you will not lose anything and (possible) get more profit.

db2020 tp procedure not work in new update v0.915043_2

indeed. and know why ? it is obsolete and removed FOREVER.

when you getting phone for repair, take small amount of money, not more than 5-10$ for "determine phone initial status and repair cost analyze".

that is normal practice in most service centers.

such way you will not lose anything and (possible) get more profit.

I agree with you laser, but it will only works if the phone model is more expensive, how do you gonna explain to the customer when he brought a k320 and ask him 5 - 10 dollar for a software repair, that when he sold his phone in good condition only cost 15 $??? that's what i mean scaring away the customer, not to mention sutpido kukuruzer for charging about 7,5 us$ for gdfs repair. damm ass stupid. if unlock price and log i agree at that price since the possibilities of success almost 100%. if for repairing phone that have uncertain future.. i will say no.

btw.. it's a good job you have done laser, keep it that way, you deserve to earn your money anyway. :D

good luck.. :D

No money, no honey. Why some one just want cheap price for repair while you can earn much, for cheap phone you can't get big sum of money but with big quantity I think is good enough for earn sth :D.

@irpaj:
so, you claiming that change flash chip is much more simple from side of cost and work than pressing ONE button and pay small amount of money ?
very funny post. about testpoints too - very funny.
.

jep,very funny,for me ,time is money,and there is no money that can pay my pleasure of pressing ONE button,and have repaired phone . Without disassembling,microscope work..... searching for TP picture...no,I always vote for good service with good price.

and,I don't readed all posts,is posibile now to repare w580 gdfs,or that will be inplemented in next update ?

indeed.

... the point is, until i get the phone repaired perfectly there is no guarantee i got money from customer.

...

If the hardware phone is perfect, I dont see why cant be fixed by software ...

One successfull unlock/repair with credits earns me enough to risk 5-10 phones.

I can do LOTS and LOTS more phones with software and still earn a shitload more, then spending 0 credits and doing testpoint phones... One tp phone = 10?15?20? phones with credits=more phones=more money...

If the hardware phone is perfect, I dont see why cant be fixed by software ...

oh well, that's the ideal situations for every phone repair man. I hope and pray that every single day i got my hands on a perfect hardware phone to repair. I swear.

life is not filled with rainbow and sunshine mate. it's raining and lighting strike every day. and I'm not complaining about my situations here, but it is happening. and i don't hope in this thread everything will be solved.

how you gonna tell a phone hardware is good if the phone arrive on your hand is in death conditions, blink conditions, etc etc, only with eyes inspections will not guarantee that hardware is working ok.

we gotta do software procedure. i hope you agree with me at this point.

@jaydee and crumarix
And I very agree with other matey that says less time more money, only if your phone is succesfully repair dude. what if not? what if your software stuff fails? you let go the phone?

in this discussion i'm not blaming the laser for providing his solutions on his upcoming price tag. mr laser deserve it and he can do what ever he will. it's his property. and to keep support him in his experiment for developing the setool, without it i'm pretty screw also. I'm just suggesting him to put a reasonable price tag. :D in a straight word less expensive than the competitor. :D

maybe your store have a lot costumer i don't know how about 1 day you got 50 semc phones?and repair them all? I don't have that much. mostly nokia phones that arrive.

is it all are high class semc phone that you can charge higher price? I don't know.

my condition here are newer phones goes to the guarantee and not ending up to my store. for a software repair from a third party. maybe that's why i always ended up with more older model, cheaper phones, which is cost less for the repairing price. mostly like k800, k500m k320 and so on, please tell me your condition there.

not to mention the competition over here. If i'm not willing to do the cheap price other dude will do it. they are relentless for doing it more cheaper price. everyone holds the knowledge to software repair the semc phones, they just opened up internet and walla here is the FAQ. And customer are looking for a cheap and excellent service, So am I. :D

and the phones that arrive at my store i will work my ass to death to make it alive and normal again if it's possible. why? If the phone not repaired by me but the other dude, I gonna get a predicate which is says "He Cannot do it, that dude can". :D how i'm gonna run bussines like that?

whoah quite a long post maybe I think it's enaough and we should not continue this discussion again. :D

See you...

I get ~15-25 phones each day, where 90-95% goes to warrenty service.

About half of the others, well, they have either broken displays or water damage.

Whats left is redblink, debranding and unlocking phones. Do the math and you do not end up with that many phones.

For me, it took maybe 2 months to get my money back from my nspro, j.a.f, setool etc, but it is all and all just extra money and i wont spend my spare time doing tp´s when it cost me less then $5 todo the same with software.

As we sell phones aswell, i can unlock and flash a branded phone and sell as a generic and earn some extra too...

And to aswere your question:

If i spend $5 for reviving the phone, and i cant make it work, then i just return it to the customer as is, or if it is a model i can scavenge parts from, offer to buy it from them at a cheap price.

@irpaj:
so, you claiming that change flash chip is much more simple from side of cost and work than pressing ONE button and pay small amount of money ?
very funny post. about testpoints too - very funny.


@others:
beta test period will ends when i decide to do so.
one day, one week, one month....

this new service works very well, but I think we need a few week for testing... :D

we will see how "my lovely team" behave themself.

we will see how "my lovely team" behave themself.
regarding the pricing for reset operation, what about same otp imei, free for next 1 hour?
it is not a bad policy :cool:

i do not want to make it.
users should understand what they doing.

we will see how "my lovely team" behave themself.

they already started to offer "free service until friday" ....

coming next ... credits consumption / price fights ...

now you and "them" have the same thing, will be interesting,
since they already established some customers, and they dont wanna loose them :)

b.r.
Alexandar

@mobilexpert:

that was 100% predictable move.
but look, they greed overcome even in that case - they put free only s1 phones ;)
anyway - they will lose at least 90% of "established" customers.
because only reason why that customers moved to cruizer is ours weird s1 signature server.
it is history now.

so - our prices will be lower. our terms and possibilities are better.
there is only SLIGHT possibility that cruizer will earn money - if they will make agreement with us about prices.
i think few ppl in their team is not such arrogant and crazy as "pair of my dear friends" and common sense will prevail.

otherwise, we will have scenario something like that:

1. prices will be lower each 3 days until zero (0.01$ per phone)
2. then
- aerix server "somehow" will do s1,db200x,db201x,db2020x,A2 CID53 phone for free
or
- setool2 will "somehow" have standalone s1,db200x,db201x,db2020x,A2 CID53
or
- cruizer and setool2 server credit price for s1,db200x,db201x,db2020x,A2 CID53 will became ZERO credits (guess, there will be month payment)

3. finally, that is effectively terminate semc market and it will became like siemens ;)

they have time to answer me until end of that week, after that - yahoo! lets REAL war commence.

ps.
if you noticed, word "kukuruzer" and others not happened here, that is became i'm always open for good conservations ;)

@mobilexpert:

that was 100% predictable move.
but look, they greed overcome even in that case - they put free only s1 phones ;)
anyway - they will lose at least 90% of "established" customers.
because only reason why that customers moved to cruizer is ours weird s1 signature server.
it is history now.

so - our prices will be lower. our terms and possibilities are better.
there is only SLIGHT possibility that cruizer will earn money - if they will make agreement with us about prices.
i think few ppl in their team is not such arrogant and crazy as "pair of my dear friends" and common sense will prevail.

otherwise, we will have scenario something like that:

1. prices will be lower each 3 days until zero (0.01$ per phone)
2. then
- aerix server "somehow" will do s1,db200x,db201x,db2020x,A2 CID53 phone for free
or
- setool2 will "somehow" have standalone s1,db200x,db201x,db2020x,A2 CID53
or
- cruizer and setool2 server credit price for s1,db200x,db201x,db2020x,A2 CID53 will became ZERO credits (guess, there will be month payment)

3. finally, that is effectively terminate semc market and it will became like siemens ;)

they have time to answer me until end of that week, after that - yahoo! lets REAL war commence.

ps.
if you noticed, word "kukuruzer" and others not happened here, that is became i'm always open for good conservations ;)

i beg you just one thing ... never underestimate competition.

your move is good, erom reset is everything we neeed from long time ago.
i hope you are implementing direct unlock via brown phone state,
for db2012, db2020, s1 etc, (everything that support cert. reset) this way.

about prices ... well, you can make any price now.
if arrogant "friends" agrees, it's nice to make same prices for logs,
so users can choose.
of course ... since mr.Mizar and mr.(mis)Lead owe you some from the past,
and got many customers ... it's up to you which way revenge will come :D

anyway ... give improvements in software, to make advantage as much as you can.

and one more thing .... if it will make you feel better ...
I personally never lost faith in you, and in this past time,
all SE phones with phucked eroms/gdfs made via setool+testpoints,
didnt want to be a sponsor to the (c) " Flea Team", buying credits :D

so keep it up, and all the best.

b.r.
Alexandar.

if they have mind, they will contact me.
if they not - war,war,war, war and war again.
now i have same weapon they had.

hi ,

they not - war,war,war, war and war again.
now i have same weapon they had.

hemm... it's seems will be happen something

we just wait what happen

Alexandar, do "Recovery" process and after go do Empty Fill tab and flash, write the original IMEI from phone and write a EROM file >= OTP CID.
I'm doing Direct unlock with this way.

err ... before post such answer, re-read my post ...
idea was to add direct unlock, without 3 operations ...
- reset cert.
- do unlock
- recover to red state
it can be implemented in software with single button click ...

ideal for newbies, and one-clik-like users ... (believe me, there are plenty of them) :D


b.r.
Alexandar

it can be done, but require power on phone twice, which is not good ;)

err ... before post such answer, re-read my post ...
idea was to add direct unlock, without 3 operations ...
- reset cert.
- do unlock
- recover to red state
it can be implemented in software with single button click ...

ideal for newbies, and one-clik-like users ... (believe me, there are plenty of them) :D


b.r.
Alexandar

then re-read my post too. it was only 2 steps: recovery and flash new erom.
but i got your idea

well, maybe i will do it later, but most probably it will not be done at all.
simple because RESET operation should be used for REPAIR, not for UNLOCK ;)
for unlock of A1/A2 phones we have pretty nice working FULL,ABSOLUTELY LEGIT unlock.

War it's not good for both of you in my openion war will kill both of your market. I have both device and I personally love setool and I am proud of you. Let's see nokia software market has gone due to war and there is a lot of crack software. I don't mean to say it also can be crack. Personally I am happy to pay reasonable price and I believe in payable software. Like Furious, Smartclip, setool etcs. Lot of software project had dead in the market because of war and compotetion. If any software have extra capacity and riskfree I think we will not hesitate to pay because we don't pay from our pocket. So, war is not good everywhere. And, I think both of you know clearly.

Gentlemen, start your (war) engines...

..:: NEW PROMOTION - FREE S1 unlock till Wednesday (September 16, 16:00 UTC) ::..

Mainboard: I have good news, Promo action was extended till Wednesday, September 16, 16:00 UTC

[Only Registered Users Can See Links]

Lets see what happens....

so they want war. okay. launch.

error write gdfs ssw using v0.915044

11/09/2009 12:10:47 PHONE STATE: "DEVELOPER"
11/09/2009 12:10:47 FLASH CID: 0051
11/09/2009 12:10:47 Speed:921600
11/09/2009 12:10:48 OTP: LOCKED:1 CID:50 PAF:1 IMEI:35165002087833 CERT:BROWN
11/09/2009 12:10:49 FLASH ID check:897E
11/09/2009 12:10:49 Flash props sent ok
11/09/2009 12:10:50 writing "J:\SETOOL\MAIN SOFTWARE\v0.915044\gdfs_in_ssw_format\db2010\k320_ gdfs_in_ssw_format.ssw"
11/09/2009 12:10:51 CURRENT FLASH FILE CID:254
11/09/2009 12:10:51 SSW uses dynamic hash, dynamic hash len is: 32
11/09/2009 12:10:52 HDR block not accepted,error: 0E
11/09/2009 12:10:52 Elapsed: 5 secs.

and with v0.915043

11/09/2009 12:13:53 PHONE STATE: "DEVELOPER"
11/09/2009 12:13:53 FLASH CID: 0051
11/09/2009 12:13:53 Speed:921600
11/09/2009 12:13:54 OTP: LOCKED:1 CID:50 PAF:1 IMEI:35165002087833 CERT:BROWN
11/09/2009 12:13:55 LDR:DB2010_RESPIN_PRODLOADER_SETOOL2
11/09/2009 12:13:58 FLASH ID check:897E
11/09/2009 12:13:58 Flash props sent ok
11/09/2009 12:13:59 writing "J:\SETOOL\MAIN SOFTWARE\v0.915043\gdfs_in_ssw_format\db2010\k320_ gdfs_in_ssw_format.ssw"
11/09/2009 12:14:00 CURRENT FLASH FILE CID:254
11/09/2009 12:14:00 SSW uses dynamic hash, dynamic hash len is: 32
11/09/2009 12:14:01 Will flash 32 blocks...
11/09/2009 12:14:35 SSW loading returns:0
11/09/2009 12:14:36 writing "J:\SETOOL\MAIN SOFTWARE\v0.915043\eroms\db2010\db2012_erom_cid50. ssw"
11/09/2009 12:14:37 CURRENT FLASH FILE CID:36
11/09/2009 12:14:37 Matching CID according file...
11/09/2009 12:14:37 SSW uses dynamic hash, dynamic hash len is: 2
11/09/2009 12:14:37 Will flash 2 blocks...
11/09/2009 12:14:41 SSW loading returns:0
11/09/2009 12:14:41 Setting up GDFS...
11/09/2009 12:14:42 OTP WRITE NOT EXECUTED
11/09/2009 12:14:42 WRITING CLEAR SIMLOCK UNITS...
11/09/2009 12:14:42 ALL UNLOCK/LOCK CODES SET TO "51044536"
11/09/2009 12:14:44 SIGNING...
11/09/2009 12:14:44 Elapsed: 52 secs.

setup correct setting.

settings are correct, there was nothing that tick in emptyfill tab.:)

settings are correct, there was nothing that tick in emptyfill tab.:)
what about to change the file, use from 43 dist. ?

@utuh:

sorry, i was wrong and it is bug in 044 ( somehow brown db201x phones handling was broken)

please use 045 version.

If I am using reset station twice or more in same day and same phone, how many log deduction ?.

did you checked FAQ ?

did you checked FAQ ?

thanks i am found it on UPDATE & NEWS.

Sorry.

Can we have the old recovery button back? that not consume any credits and just upgrade the CID to 53. :D it's kind of cool if we can have it back oerational. :D

Can we have the old recovery button back? that not consume any credits and just upgrade the CID to 53. :D it's kind of cool if we can have it back oerational. :D

v0.915044

- fixed EROM UPGRADE feature for db2020 phones.
it will be active when no settings set and RECOVERY pressed.
thx to arash for reporting.


...

Can we have the old recovery button back? that not consume any credits and just upgrade the CID to 53. :D it's kind of cool if we can have it back oerational. :D

uncheck use server.

latest version 5050.
try use alternative bypass package in K790 phone.
can't start bootloader after executor.
will try several times again, any other people get same issue like this?

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:352206010kevin CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

DISCONNECT PHONE NOW
INSERT SIM CARD, FULLY TURN PHONE ON AND ATTACH AGAIN
INSTALL PHONE MODEM DRIVERS IF NEEDED

SEARCHING FOR PHONE, "STOP" TO ABORT
PROCEDURE WAS STOPPED BY USER
Can't find attached phone with IMEI 352206010kevin
Elapsed: 50 secs.
SIGNED MODE (USING SERVER)
PRELOADER SECURITY BYPASS ENABLED
CFG:101100000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600

PRELOADER SECURITY BYPASS ENABLED
CFG:001100000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
Starting embedded bootloader...
can't get packet start.
embedded flashloader not responds !
Elapsed: 36 secs.

br,
kevin168

most probably phone damaged by drea_mbox.
use com/ufs as interface, but i strongly recomment to make RESET.

most probably phone damaged by drea_mbox.
use com/ufs as interface, but i strongly recomment to make RESET.

ok boss,
thx for advice, same old problem caused by another tool,
already using UFS interface.
Problem SOLVED.

br,
kevin168

hello sir,
can you put the TP button back?
I know it's really funny coz you have a great solution (reset procedure). but by bringing TP button back it's make setool more fully optional,so we can choose a way for doing the jobs.
ex:
-if we want the simple way, not spending much time and not so risky we just use reset procedure.
-and if we want to use the hard way, we just use TP procedure. the hard way spending much time, more risky.

This is just my opinion, if you and another people here doesn't agree with this, just ignore it. :)

thanks sir,

just forget about tp, it will never came back.

Dear Laser... as ussual, when I'm post there should be troubles. :D

I began to experience this.
SIGNED MODE (USING SERVER)
CFG:100110000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 40 secs.
CFG:000110000000
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER
PROCEDURE WAS STOPPED BY USER


setool hang sporadically and cannot be stop either on usb or com port. happened in 50 - 51

Good Luck...

i can not reproduce that.
i tested throughly flashing of multiple phones, stopping-starting of processes and found no probs.
becide that, nothing was done with ui/comm functions from very old times.

check your system.

need driver for windows 7

Dear the_laser, i want to explane a problem that I got today using setool...

I was triing to unlock a phone with changed im*i and during unlock procedure ( when i should to power on the phone with sim card), setool don't see the phone.
I think it don't see the phone because otp im*i is checked before and after (when program scan com port) setool read the other im*i, so it think that phone is different.
You can put a check box where the user say that im*i is not the same which is stored on otp??

Tnx

ChuckyIT

P.s. I can't flash because customer don't want to lose all things :)

it is expected behaviour and that will not be changed.
in such cases, you can do one of following:

1. flash in signed mode only main part of image and redo free patch unlock
2. use full signature unlock
3. use reset-based unlock

seems a minor bug in latest version cant use custom package for w580...

hardly possible. where is log ?

strange, w595s come to unlock, here is log:

2009-10-18 16:32:26 v0.915053/UNI
2009-10-18 16:32:26 CARD SERIAL: 00xxxxxx
2009-10-18 16:32:26 Loaded 51 flash descriptors
2009-10-18 16:32:43 SIGNED MODE (USING SERVER)
2009-10-18 16:32:43 ALTERNATIVE SECURITY BYPASS ENABLED
2009-10-18 16:32:43 PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
2009-10-18 16:32:43 CFG:110000000000
2009-10-18 16:32:55 ChipID:C900,EMP protocol:0401
2009-10-18 16:32:55 BOOTROM MODE DETECTED
2009-10-18 16:32:58 OTP LOCKED:1 CID:52 PAF:1 IMEI:3575030216xxxx CERT:RED
2009-10-18 16:33:02 LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
2009-10-18 16:33:02 DEVICE KEY:3E02C6C9211815E7318D08A969DCC017 (0)
2009-10-18 16:33:03 LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081
2009-10-18 16:33:04 LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081
2009-10-18 16:33:08 GOT SEED:455B9EF234807F7425F0D527
2009-10-18 16:33:08 P96 AUTH PASSED
2009-10-18 16:33:08 RESETTING SECURITY TO FACTORY STATE...
2009-10-18 16:33:09 RESTARTING...
2009-10-18 16:33:13 ChipID:C900,EMP protocol:0401
2009-10-18 16:33:13 BOOTROM MODE DETECTED
2009-10-18 16:33:16 OTP LOCKED:1 CID:52 PAF:1 IMEI:3575030216xxxx CERT:BROWN
2009-10-18 16:33:17 LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
2009-10-18 16:33:20 LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
2009-10-18 16:33:20 WRITING SEMCBOOT...
2009-10-18 16:33:21 PREPARING SECURITY...
2009-10-18 16:33:22 CHANGING DOMAIN TO "CURRENT"
2009-10-18 16:33:22 SIGNING...
2009-10-18 16:33:23 DEVICE KEY RESTORED
2009-10-18 16:33:25 Phone detached
2009-10-18 16:33:25 Elapsed: 41 secs.
2009-10-18 16:35:03 SIGNED MODE (USING SERVER)
2009-10-18 16:35:03 ALTERNATIVE SECURITY BYPASS ENABLED
2009-10-18 16:35:03 PLEASE CONNECT PHONE IN EMP BOOTROM MODE (HOLD "2+5")
2009-10-18 16:35:03 CFG:110000000000
2009-10-18 16:35:13 ChipID:C900,EMP protocol:0401
2009-10-18 16:35:13 BOOTROM MODE DETECTED
2009-10-18 16:35:15 OTP LOCKED:1 CID:52 PAF:1 IMEI:3575030216xxxx CERT:RED
2009-10-18 16:35:18 LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
2009-10-18 16:35:18 DEVICE KEY:3E02C6C9211815E7318D08A969DCC017 (1)
2009-10-18 16:35:19 LDR:2009-04-21 18:17 CXC1250781_DB31XX_RESET_LOADER_ACC_SDRAM_R2A081
2009-10-18 16:35:20 LDR:2009-04-21 18:18 CXC1250782_DB31XX_RESET_LOADER_APP_SDRAM_R2A081
2009-10-18 16:35:23 GOT SEED:79884A9234807F7425F0D527
2009-10-18 16:35:23 P96 AUTH PASSED
2009-10-18 16:35:23 RESETTING SECURITY TO FACTORY STATE...
2009-10-18 16:35:24 RESTARTING...
2009-10-18 16:35:26 ChipID:C900,EMP protocol:0401
2009-10-18 16:35:27 BOOTROM MODE DETECTED
2009-10-18 16:35:30 OTP LOCKED:1 CID:52 PAF:1 IMEI:3575030216xxxx CERT:BROWN
2009-10-18 16:35:31 LDR:2009-06-26 15:52 CXC1250777_DB31XX_PRODUCTION_LOADER_ACC_SDRAM_R2A0 82
2009-10-18 16:35:34 LDR:2009-06-26 15:53 CXC1250778_DB31XX_PRODUCTION_LOADER_APP_SDRAM_R2A0 82
2009-10-18 16:35:34 WRITING SEMCBOOT...
2009-10-18 16:35:36 PREPARING SECURITY...
2009-10-18 16:35:36 WRITING CLEAR SIMLOCK UNITS...
2009-10-18 16:35:36 ALL UNLOCK/LOCK CODES SET TO "33642265"
2009-10-18 16:35:39 CHANGING DOMAIN TO "CURRENT"
2009-10-18 16:35:39 SIGNING...
2009-10-18 16:35:40 DEVICE KEY RESTORED
2009-10-18 16:35:40 Unlock FINISHED
2009-10-18 16:35:40 Elapsed: 37 secs.


had to unlock it 2 times to make it unlock... maybe a bug?

first time you flashed phone, second time unlocked.
bug is not in setool2 sw.

i saw "Repair Identification" service on emma.
is it useful if setool2 also have this service?

br

as far as i remember , that service checking flash chip id and say "vulnerable" or "not" ;)

Hello, mr. The_laser i want to report i think i little bug in setool, i was unlocking 1 w200 and software unlock the phone good but software log still drop it like locked i mean after patch unlock, i think setool log have to say UNLOCKED...

Thank you master! :)

patch unlock not change lock status, so patch unlocked phones will be reported as "locked"

Thank you sir!! i think it is better in that way because in the end the phone it is not full unlocked :D