Hello everyone i need to know if someone have successfully unlocked any MYC-4 or MYC-5-2 with SWS-SAG because for me it´s a total disaster it always stops at 40% and give BAD TESTPOINT error, i have tried everything !!! two different brand JIGs adapters, and even soldering directly the cables using the right pinout, always stops at 40% :mad: :mad: :mad: ...

The other question is about brute force method, does it works ?? for me always reads the phone info and later it says "WAP filed error" for every version until the last update....

Bruteforce method is inapplicable for current level of Sagem phones!

I know brute force was method for old firmware versions of first models, but it does not work for me even on any old models like MYC2 and so on, thats why i´m asking i...

sagem myc4-2 not unlock for my tests points not work,s....

you must have a full battery and test point correctly join and battery on, i know it's very difficult whit only two hands but you can do it

My C4 do unlock but after a successfull update of the dongle from the server. But the problem of the 40% disaster comes from the bad color codings of your cable.
If you want to unlock the babe successfully just follow the test points from support site for my C4. Cut you cable. Here we are using soldering direct to the phone. Now be very carefull here. To each test point,there is a number assigned to it.( I mean Pin1, Pin 2. Pin3 as written in the test point diagram) Dont follow colors as you find that they dont match.
Solder the wire you find coresponding with the cable.
In 2seconds you will find the powers of SWSTEAM with sagems.
I have not got the right test point diagram for MY5-2.

It really an headache using sag master I only succedd in doing one in Freetown with Sag master I have to disconnect the test point connection RJ45 and choose the four colured test point cable and soldered it to it connection on the plaque and it accept
Hello everyone i need to know if someone have successfully unlocked any MYC-4 or MYC-5-2 with SWS-SAG because for me it´s a total disaster it always stops at 40% and give BAD TESTPOINT error, i have tried everything !!! two different brand JIGs adapters, and even soldering directly the cables using the right pinout, always stops at 40% :mad: :mad: :mad: ...

The other question is about brute force method, does it works ?? for me always reads the phone info and later it says "WAP filed error" for every version until the last update....

:p It really an headache using sag master I only succedd in doing one in Freetown with Sag master I have to disconnect the test point connection RJ45 and choose the four colured test point cable and soldered it to it connection on the plaque and it accept
Hello everyone i need to know if someone have successfully unlocked any MYC-4 or MYC-5-2 with SWS-SAG because for me it´s a total disaster it always stops at 40% and give BAD TESTPOINT error, i have tried everything !!! two different brand JIGs adapters, and even soldering directly the cables using the right pinout, always stops at 40% :mad: :mad: :mad: ...

The other question is about brute force method, does it works ?? for me always reads the phone info and later it says "WAP filed error" for every version until the last update....

Hello everyone i need to know if someone have successfully unlocked any MYC-4 or MYC-5-2 with SWS-SAG because for me it´s a total disaster it always stops at 40% and give BAD TESTPOINT error, i have tried everything !!! two different brand JIGs adapters, and even soldering directly the cables using the right pinout, always stops at 40% :mad: :mad: :mad: ...

The other question is about brute force method, does it works ?? for me always reads the phone info and later it says "WAP filed error" for every version until the last update....

anybody with sagem myc4-2 testpoint and pinout to pls give link.thanks