Hi everbody I have PG3210, I try *01763*73738# but not unlock, can Im helme,
Saludos

my email is lvillegas98@hotmail.com

*746*737381#
*983*737381#
*01763*737381#
*01763*737382#
*528*737382#
........................

tested:
01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu

thank you very much by its aid, I put myself to his you order.
Gracias amigos.

:) use this!

:) use this!


good word:D

:) use this!

I tested that and it works even for c300, but only enable 3 different simcards with 5 digit mnc, the cable is a little tricky to make.
this program cannot unlock just modify the restrictions.

mhhh, how to undo *01763*3641# ????
thanks!

*01763*476# --- Tests
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*737381# (*01763*RESET1#) --- System reset (all default settings)

*01763*546360# --- LineN0 ?
*01763*546361# --- LineN1 ?
*01763*546364# --- LineN4 ?
*01763*546367# --- LineN7 ?

*01763*34531# --- ?
*01763*62766# --- ?
*01763*727# --- ?
*01763*68726# --- ?
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
ADDITIONAL CODES - „???‹?€’…‹??›… ??„›:
---------------------------------------
G500 [GIHR0507042004 ZEUS Ver. 0.01s]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*225837# --- ?
---------------------------------------
G600 [GZBP0105102004 PANTECH ver 1.0]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
---------------------------------------
G700 [GXNP0107242004 TLION ver 1.0s]
---------------------------------------
none - ­??
---------------------------------------
G800 [GLAP0006062004 G800 ver 1.0N]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*79837# (*01763*SWVER#) --- SoftWare version
*01763*28271# --- ?
*01763*28270# --- ?
*01763*2873738# --- ?
*01763*288# --- ?
---------------------------------------
G900 [GWBP0206282004 G900 ver 1.0b]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*79837# (*01763*SWVER#) --- SoftWare version
*01763*92782# --- copy UaData..... copy [Only Registered Users Can See Links] Edit Mode : %s ?
*01763*927827763# --- copy UaProfData..... copy [Only Registered Users Can See Links] ?

does anyone know below codes working for gx15?

*01763*8781# (*01763*TST1#) --- Test #1
*01763*8782# (*01763*TST2#) --- Test #2
*01763*8783# (*01763*TST3#) --- Test #3
*01763*8784# (*01763*TST4#) --- Test #4
*01763*8785# (*01763*TST5#) --- Test #5
*01763*87872# (*01763*TST72#) --- Test #72
*01763*8788# (*01763*TST8#) --- Test #8
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*4634# (*01763*IMEI#) --- IMEI
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*8371# (*01763*VER0#) --- Firmware Version

later says in the Enable MEP menu (unlock menu), i should type 99 and Input Mode No: Press 1 and then top right key. The following messages should appear:

· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY

is this information true? i dont want to mess my handy totally.if anyone has information about this,pls let me know.
thanks

*01763*278257# Assert Fail Log clear
*01763*2783771#
*01763*2783772#
*01763*2783773#
*01763*2783774#
*01763*2783775#
*01763*3640# disable Engineering Mode
*01763*3641# enable Engineering Mode
*01763*4634# IMEI
*01763*5640# disable LOG
*01763*5641# enable LOG
*01763*6365641#
*01763*6370# disable MEP menue (unlock menue)
*01763*6371# enable MEP menue (unlock menue)
*01763*63866330# disable NetMode
*01763*63866331# enable NetMode
*01763*753371#
*01763*8371# Firmware Version
*01763*8781# Test #1
*01763*8782# Test #2
*01763*8783# Test #3
*01763*8784# Test #4
*01763*8785# Test #5
*01763*8786# Test #6
*01763*8787# Test #7
*01763*87870# Test #70
*01763*87871# Test #71
*01763*87872# Test #72
*01763*87873# Test #73
*01763*87874# Test #74
*01763*8788# Test #8
*01763*87891#
*01763*87892#




*01763*476# --- Tests
*01763*546360# --- LineN0
*01763*546361# --- LineN1
*01763*546364# --- LineN4
*01763*546367# --- LineN7
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*737381# (*01763*RESET1#) --- System reset (all default settings)

*34531
*62766
*727
*68726

I have a pantech C300 and *01763*3640# does work on disabling engineering mode SOME ONE PLEASE HELP!

I have a pantech C300 and *01763*3640# does work on disabling engineering mode SOME ONE PLEASE HELP!

Without SIM on ENG screen keep press Next key you will return to normal screen and now you can input *01763*3640# it's works

PARDON MY INGLES I HOPE IS TO THEM OF AID GREETINGS CELLTECNICO-LOCO22:)

did you checked [Only Registered Users Can See Links] ?

:) use this!

what pinuot for cable unlocking

how to unlock?

*01763*3641# - Menu.......how to undo ,pantech .........SPANISH...resuelto, prender el telefono con la sim presionar sigiente y end...no send...luego ingresar *01763*3641#...listo queda normal

hello my problem is, i try the code "*01763*6371# - UNLOCK"
now show one menu with codes, the problem is what I cannot remove it and return to menu original , pls! help!:eek:

greetings

I've tested all the code put in this web but wasn't worked. There are anybody who have an update for this nice but evil phone ;) Thank everybody.

Tengo un maldito PG-3210 que no logro descodificar con los codigos encontrados aqui, alguin se sabe o se ha puesto al dia, con el unlock de este lindo telefono?? Muchas gracias

djg_cu@hotmail.com

search in the forum my friend , there is a good solution for 3210

Dear Lyana, Non of these code work my friend in the pantech 3210, Thank