sprut70
26-10-2006, 10:03
When I plug my phone to PC, it asks for the drivers, that I cant find anywhere. I need drivers to make it works with QPST EFS Explorer or with InfoPST. Please,post it or explain how connect it with those programs.
|
View Full Version : xv6600 drivers needed sprut70 26-10-2006, 10:03 When I plug my phone to PC, it asks for the drivers, that I cant find anywhere. I need drivers to make it works with QPST EFS Explorer or with InfoPST. Please,post it or explain how connect it with those programs. tomtim 11-11-2006, 10:26 try this solution.... find XV6600 modem in witch port..;) btw, i never try it... post the result ok..:) Using your 6600 as a Wireless Modem through USB Wmodem Software Right click here to download the zip file for WMODEM. [Only Registered Users Can See Links] Right click here for the USB dialer driver [Only Registered Users Can See Links] RIght click here for the activesync disconnect program [Only Registered Users Can See Links] Wmodem Instructions Here are the instructions that sdppc posted on pdaphonehome.com and slightly modified by me. Note that you do NOT need to do the "download steps" because the files up above are the download files you need. The steps to take Download the files Download the attached wmodem.zip and unpack wmodem.exe to your Pocketpc. Download the attached dialer/driver and unpack and install on your pc Download the attached DisconnectActiveSync and put it on your pc How to use On your laptop run DisconnectActiveSync On the PPC turn off "Vision"(sprint) or "Express Network"(Verizon) by holding the end button down until it disconnects. If this puts your phone in flight mode, take it back out of flight mode, but don't let it reconnect to the data network. Start wmodem on phone. Make sure to pick USB on popup in wmodem and hit start button. Plug phone into laptop via usb When new hardware wizard starts, point to drivers attached below which should be on your laptop. Start dialer. NOTE: After using this method, you won't be able to USB activesync without re-enabling it. On the pocket PC go to start menu-->programs-->activesync, select the options tab... then click the options button... then check the checkbox and select "USB" from the dropdown. kshah 11-11-2006, 15:05 I have tried this method but did not worked for me. May be I made mistake somewhere surf98 29-11-2006, 06:20 This is the MODEM solution, not QPST solution. drsp22 08-01-2007, 11:01 Can any of my forum friends post the Serial-cable driver for Audiovox xv6600? I lost the Verizon Software CD. Thanks. |