I have been trying to make ringtones on a utstarcom 7075 using bitpim. I have downloaded the drivers and everything and bitpim still doesnt recognize it. Does anyone know of any programs or fixess for this. Its getting really annoying. Anything will help

Try using this, is not as fast as bitpim but it should work, I've been using bitpim with 7025 with no problem maybe your problem is with your cable. You should check if windows device manager is seeing your phone if it is set the same port in the app and it should work. Good luck.

I haven't been able to get this phone to read through anything, what cable are you using?

I'm using AUD7025DICU cable. You can also use data cable for LG VX6000, the cables P/N is LG-DCL200C, try to use any of these two with charger connected to cable, both of there cables are USB and work OK. Tell me if this helps.

need driver for 7075

You might try going to: [Only Registered Users Can See Links]
To find the drivers that you are looking for..
I hope that this helps, if not google drivers for UTStarcom CDM7075.

driver works. i'm connected with the phone with CDMA Workshop. anyone can help to read security code on it? what method to use?

Glad the drivers worked:), I do not know about the security codes though.

Hey which program do i use to open that file. It try to find one online but i cant?

Gflow I'm not sure what you mean by which program to use to open what file:confused:. If you are talking about the driver file, it downloads as a zip file. Then you just have to double click on it off of your destop to install the file;). If this done correctly you should have a shortcut on your desktop:). Then you should be able to connect your phone to the data cable, the data cable to the usb port and you computer should recognize your phone:p. I hope that this answered your question and helped.:D

whe i try to open the EasyCDMA.rar file it ask which program do i use to open it. :confused:

Gflow I wish i had the answer how to access the Easy CDMA.rar file.:( The only thing I could suggest is do a google search for opening the easy cdma.rar file:confused: Other than that I'm at a loss, everyone just seems to want to know how to open the file on this phone. To be honest I really don't know what to tell you. I hope that I have given you some idea of where to look:).

Gflow you might try this site as to how to open that file.
[Only Registered Users Can See Links] I don't know if that will help but it is somewhere to start:).

whe i try to open the EasyCDMA.rar file it ask which program do i use to open it. :confused:

Try using Winrar program, just look for it on google.

Thanks Mobilerep, if Gflow clicks on the web site I listed it will show him that program plus the downlod for it:). There's also another program on that site to download. Thank you for response to my reply:D.

I am using a Datapilot LGA USB cable (it works with datapilot with their drivers), but I don't think their drivers will read/write the 7075 file system.

So on a seperate computer I have installed UTStarcomCDMAHandsetUSBDrv.zip, this recognizes the 7075 and creates 3 entries in Device Manager (see attachment) , But I can not get BITPIM, EASYCDMA (v1.96) or CDMA Workshop(v2.1.1) to do almost anything, I have tried using the Modem com port (com4) and the Handset Diagnostic serial port (COM7), but can't get it to read ESN or any info from from phone, CDMA workshop doesn't time out on the Main read (using COM4) but nothing shows up in the display. AT commands work to COM7.

I used CDMA workshop with a 7025 and the Audiovox drivers and it worked , I read the file system (the SPC is in NVM_0002) with no trouble.

Anybody have any ideas how to use CDMA Workshop or a better program to read up the 7075's file system/memory?

The phone is detected on the computer but when I use SE47Tool to try and detect the phone it doesn't do anything... Can't interface with the phone. Where do I go from this point? Any solution?

I thought i used bitpim on this phone to read spc code.
Did you try that?

can somebody send cdma workshop to me i already had the trial and it expires. the full version please. thanks in advance

i believe you will have to buy it... thats the only way

I am using a Datapilot LGA USB cable (it works with datapilot with their drivers), but I don't think their drivers will read/write the 7075 file system.

So on a seperate computer I have installed UTStarcomCDMAHandsetUSBDrv.zip, this recognizes the 7075 and creates 3 entries in Device Manager (see attachment) , But I can not get BITPIM, EASYCDMA (v1.96) or CDMA Workshop(v2.1.1) to do almost anything, I have tried using the Modem com port (com4) and the Handset Diagnostic serial port (COM7), but can't get it to read ESN or any info from from phone, CDMA workshop doesn't time out on the Main read (using COM4) but nothing shows up in the display. AT commands work to COM7.

I used CDMA workshop with a 7025 and the Audiovox drivers and it worked , I read the file system (the SPC is in NVM_0002) with no trouble.

Anybody have any ideas how to use CDMA Workshop or a better program to read up the 7075's file system/memory?

man, can u post the audiovox drivers to read the SPC or tell us where to find it to download.

Br
Juvenile

After another try of programming the 7075, I was able to connect to it with both EasyCDMA, and CDMA Workshop. I used Datapilot cable LGA (LG 6000 compatible), using either the Susteen/Datapilot driver (USB_SamsungH_Install.exe) or the UTStarComUSB drivers posted here.

You must use the PORT com port, not the modem com port (the driver actually installs three instances of the device, Modem, Port, & USB).

The MSL/SPC can be read from nvm/nvm_002 & CDMA workshop will send it(to get permission) and write it(to update it after you send it).

Alas once I got done programming it (cleared the Verizon SPC, and I updated the PRL so I could run on Cricket) and testing it on several different computers.
At some point, I became unable again to do anything other than connect to the com port, I couldn't read back any data. The phone works fine with my updates. This looks like the original problem I had with several of these phones.

I suspect I must do something to put the handset in data mode, but I don't know what. Anybody else know?

just in case this can help here is the best way to read the spc code in this model:
1rs-just put this dll to your universal pst. how: go to C:\Program Files\InfoSOFT\Universal PST\Plugins and just unzip it and droop it there,
2d- use serial cable(vx1200 or vx6000)
3r- open universal pst and it will detect the phone right away, close upst.
4r- open bitpim nvm002 and there is the spc code.
5- write prl with qpst service programming.
enjoy and dont forget to say the magic word: thanks.

i need ur help, i just installed the Universal PST and the dll files, but now it says HARDLOCK NOT FOUND, any crack file to make this program running,. o what can i do to make it work?

br
Juvenile

sorry juvenile, but i can not help you with that because a friend of me install upst for me in my computer, i was trying to do it in another computer and have the same "hardlock not found" error.
if somebody can do a step by step explanation on the procedures it will be verry helpfull to us.

regards
pocho30

try opening from C:\Archivos de programa(program files)\InfoSOFT\Universal PST, i opened it from drive c first and now it is working nice, try that, maybe it works.

br
juvenile

hi everyone can anyone tell me where can i find drivers for 7075
thanks

Not sure if this is what u need...although my cpu connects fine with 7075's and I'm almost positive this is the driver I used. Hope this helps!!:)

The other file would not upload via mf so I uploaded it to share it.


[Only Registered Users Can See Links]