View Full Version : HOW TO BUILD AN ALCATEL VLExx CABLE WITH ALCATEL OT-xxx CABLE ???


Bokonda
16-06-2008, 10:02
CAN SOMEONE HELP ME WITH SCHEMAS TO BUILD AN ALCATEL VLExx CABLE BY USING OR WITH ALCATEL OT-xxx CABLE ???

yama.tech
16-06-2008, 14:59
I need SCHEMAS alcatel ot s120 and soft for unlock
please help me

best regard

.::Gsm Killer::.
16-06-2008, 21:52
How to make a datacable for ot-eXXX phones

Pinout:

[Only Registered Users Can See Links]

cable with just GND, TX and RX will work fine, but you'll have to push power on button on phone each time you want to make a connection
so better is to build cable with RTS signal connected to pin #7 (auto ignition) - with this cable no need to push any buttons on phone anymore

Connector:
you can use connector for ot535 or ot715 phone
(as you can see for autoignition cable you'll need a ot715 connector)

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

you must cut the connector a little to fit in the phone
normal cable:

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

.::Gsm Killer::.
16-06-2008, 21:52
Autoignition cable:

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

Original: ot-eXXX cable ([Only Registered Users Can See Links])

yama.tech
16-06-2008, 23:27
phone alcatel ot s120 is no same ot seie e xx it is a new alcatel

helpe me plz

Bokonda
17-06-2008, 11:14
Thank you very much my brother of gsm Killer

Ibrahim Bangura
02-07-2008, 13:33
thank you for your brave and interesting pictures which give me great ideas in doing such and other cables
Autoignition cable:

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

[Only Registered Users Can See Links]

Original: ot-eXXX cable ([Only Registered Users Can See Links])

gsmlab4u
28-07-2008, 19:27
which device cavble r u looking all are avlb contact me. all type of cables r avlb right nw.

gsmlab4u

2