View Full Version : CHMC PST for Casio/UTStarcom C711 Boulder
G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
sanders2232 22-09-2008, 22:08 Woozy82, I would just like to say you are the #$%&&*# man! Thanks for sharing this, works 100% I just tested. Anyone tested type-s with these drivers yet?
Verizon C711 Firmware V9230M06 BIN file ([Only Registered Users Can See Links])
dondoola 27-09-2008, 06:37 does it do esn repair?
DirtDiver 18-10-2008, 03:53 Damn! I've been looking High and low for this. Thanks a whole bunch!!
My company issued me this phone with the camera disabled, verizon put a sticker over the lense and disabled the camera in the firmware, is the firmware posted for a model with a active camera?
Your the *#&$ my friend!!
THANKS so much it work i will come for info later
bigtoker69 26-10-2008, 03:12 i am a complete newbie at all this stuff and i can not get it to go past the part where it says failed to right spc can u help
turbodave 06-11-2008, 00:55 M09 is the latest rev. but for some reason I'm not able to post it. Either zipped or rar'd
pumkinut 16-12-2008, 02:35 I'm new to these boards, so hello.
I just got the VW Casio Boulder and as with DirtDriver, corporate disabled the camera. Does the posted F/W enable it?
merlin2007 24-12-2008, 20:21 Hi,
I installed all three of the packages at the top of this post, and they all installed successfully, but nothing appears in Windows Explorer when I plug in my cell phone. Windows XP tells me "your hardware is installed and ready to use" but I can't access the cell phone.
Thanks.
ycbzj0123 31-12-2008, 01:08 thank you very much!but i don't have g'zone type-v firmware!
la m3nte 07-01-2009, 03:44 how enter to nam programing in casio gz one of verizon
how enter to nam programing in casio gz one of verizon
##program + send
iceberg18 26-01-2009, 19:08 Does anyone know how to do an emergency flash? I am able to get the phone into download mode, but it wont detect in CHMC Lab or Store.
ycbzj0123 28-01-2009, 06:41 Does anybody have g'zone type v's (c511) DLL and Firmware file with CHMC PST?:(
iceberg18 29-01-2009, 00:49 Does anybody have g'zone type v's (c511) DLL and Firmware file with CHMC PST?:(
You will also need a USB driver to go with that request....
ycbzj0123 30-01-2009, 18:41 Yes ,I have C511 usb modem drivers! but no PST DLL and firmware!I want to change ESN with QXDM COMMAND "NV_Write ESN {0X12345678}" ,but QXDM said this item is read only!Cany anybody help me?
zjhmylove 07-03-2009, 17:01 does anyone have a c711's SCR and ERI file ,i want rebuild my boulder,but i only have c711's firmware V9230M06 BIN file,if any one have a new one ,please help me !thanks a lot!
bluegatar 28-03-2009, 20:56 G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
good work!!!
Does anyone know how to disable the camera in this phone??
danielhookup 01-05-2009, 07:44 BRINT it to me vic wire less
tommypic 03-05-2009, 16:33 I have d/l all the files at start of thread but no program loads all help would be thank full . I have rebooted puter an still nothing :confused:
pockketz 21-05-2009, 01:35 G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
I downloaded and installed all these and plugged in my phone. The Found New Hardware window pops up asking me to install the proper software for Qualcomm CDMA Technologies MSM. What do I do now? Am I doing something wrong? Please help!
Am I doing something wrong? Please help!
yes you didn't click the thanks button
the same goes for the rest of you Junior Member asking questions with
Thanks: 0
TombGuard 22-05-2009, 00:12 I will give thanks when I finally find/understand CHMC PST 1.2.0
Is this a program? b/c I've installed and only see USB driver in Programs.
Thanks (in advance), Tomb
************************************************** *******
::::UPDATE::::
I've answered one of my own questions. I have CHMC PST 1.2.0 installed. Installation puts CHMC folder in C:\, not C:\Programs.
You must have USB cable to procede... $3.50 on Ebay
CHMC automatically recognized phone. To use QPST, open QPST Configuration first > Ports > Add New Port > Click on COM6 on left and OK.
Close QPST Configuration and open QPST EFS Explorer. It should recognize your phone now.
To add ringtones and/or get pictures off phone.
-Open CHMC first > Once phone connects > Setting (on left) > System Security tab > Read from Phone (this unlocks folders so QPST can edit) > Close CHMC
-Open QPST EFS Explorer and navigate to BREW/mod/10888 (these are your pictures) BREW/mod/10889/ringtones (drop MP3s here)
Restart phone after dropping MP3s and you're good to go.
Now I'm gonna try to change picture on external LCD. Any ideas?
Anyone hear of any generic firmware on the loose for the Boulder?
I just received my new boulder and I am trying to add some ringtones. I get to the qpst config but it ony shows two com ports. The first is com1 which says enabled no phone. The second is com2 it say waiting no phone. The instructions are to enabe the diabled port but I don't have that option. Does anyone have any suggestions?
Thanks in advance.
TombGuard 27-05-2009, 00:29 updated #26 above.
Thanks alot tombguard. That worked great!:D
ntranced 02-06-2009, 23:08 does anyone know how to make this program modify the proxy server and mms settings. It seems like about 50% of the stuff is locked and read only
thenoblemobile 03-06-2009, 22:03 i was able to enable the camera by choosing upgrade option in the pst, but then when it reloads the eri and scr back up items it restores the disable camera menu option. I think camera can be re-enabled by upgrading to new firmware, but then unplugging phone after bin is upgraded but before eri and scr files are written. Basically upgrade the firmware, but dont let the pst re-install the backup items. i am about to do this asnd see what results are...but sure would be nice to have eri and scr.
thenoblemobile 03-06-2009, 23:02 You can enable Gzone boulder camera by:
-installing the pst, the dll, and the drivers linked at top of this thread.
-using cdma workshop or some other pst, READ THE A-KEY and write it down somewhere.
-On the PST upgrade with the BIN file
-After the phone reboots THE FIRST TIME unplug it before it re-writes previous settings including EFS settings.
At this point camera will be enabled but ESN will be erased, and A-key will be erased.
YOu will need to use cdma workshop or other method to rewrite both: the esn and the a-key. The a-key tells verizon the esn is in fact the esn of the phone. without it, your phone will not be able to make calls.
If you allow the PST to restore previous settings, then the camera will be locked again.
thenoblemobile 03-06-2009, 23:23 dont do this until i post more info...
thenoblemobile 04-06-2009, 00:01 this screws up the ESN. Even with the correct
thenoblemobile 04-06-2009, 00:08 even if you rewrite the correct esn and akey the phone still will not authenticate over the network.
thenoblemobile 04-06-2009, 02:22 after I:
saved the a key
wrote bin file
stopped upgrade after phone rebooted first time
rewrote esn
rewrote a key
performed an esn swop with verizon to a different phone, and then swopped right back to casio boulder....
My casio boulder makes calls and takes pictures!
thenoblemobile 04-06-2009, 02:25 if we had the boulder eri and scr it would be perfect.
seryozha 10-07-2009, 01:22 where can i get chmc pst 1.2?
trixie682 16-07-2009, 06:42 I'm hoping this will help me get into the T9 editor to unlearn all the dumb words my phone managed to pick up. haha If not, I'm sure I'll have fun playing around with this thing. THANK YOU!!!!
ntranced 16-07-2009, 09:03 wonder how hard it would be to get that dll to work with LG downloader as this phone is made by LG
Just had to say out loud!!!!
G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
I am trying to have my gzone for my son flashed from verizon to cricket. i was told there is a block from casio on it and they can't ger to drivers onto the phone.
can anybody please help....my son is a terror on phones and this is the only one that has held up!!!!
Just got a Boulder today (camera feature not available) work phone. I dl QPST, CHMC PST 1.2.0, boulder dll, boulder usb driver 1.2.4, Gzone drv and v9230M15 bin. Just ordered the usb cable on ebay for 3.95 and would like to unlock this camera. Confirm this will work without sending esn swop to another v-phone and back because I have no idea what yer talking about.
kojoboulder 01-08-2009, 00:43 So I feel like I'm missing something - sorry to be such a newbie but am I missing the links for the downloads?? or have they been removed?? thanks
harescramble 01-08-2009, 20:21 Looking for CHMC PST 1.2.0 download and QPST and all other necessary files for download to activate camera as well. Anyone have any luck finding download links that work??
ntranced 04-08-2009, 23:19 what happened to this file, I downloaded it last month
Hello there. I'm new to this forum and i am trying to find the Casio Boulder V9230M12 upgrade can anyone tell me where to find it. Thanks :)
I would like to enable the camera on my phone also, but as with the other posts the links and instructions are not available. Please help!:eek:
Seems to be going into month 3 with no constructive input or advice, can we assume the boulder has lost its appeal and everyone with the knowledge has lost interest. Perhaps we could get a ( sorry there is no fix at this time ) that would indeed be something.
ntranced 19-08-2009, 18:55 I bet the dll can be modified to work with LG downloader
I just obtained this phone through my employer, with the camera disabled as well, and just wished to formally say "Thank-you" to Woozy82.
ANYONE HAS THE LINK FOR THE CHMC PST???
djisia87 29-08-2009, 05:09 I found.....
kninja1211 02-09-2009, 08:11 BIG THANKS in advance. New to the site, looks like a good one
smitty68521 02-09-2009, 15:02 I wasn't able to find any links on this post...
ntranced 03-09-2009, 02:10 [Only Registered Users Can See Links]
Cdassassin 18-09-2009, 18:30 ITS GOOD TO BE HERE
eldiablo3288 25-09-2009, 04:29 thanx
Anyone know about a fw 16 for the Boulder
ok, just got a boulder i can connect to it with my pc using blue tooth no problem. bit pim does not appear to support this phone yet. from reading in this forum it appears i need CHMC PST. all the links to this down load are dead. is that what i need to install ring tones and where can i get it?
mnemonic357 05-10-2009, 22:06 Can you post a new link so I can download CHMC PST......i have been searching for 2 months to download it......i have tried countless programs and nothing works with my G'z One Boulder.....thanx.
dreamwarrior 06-10-2009, 01:58 Thank you so much for info
sebascalidoso 24-10-2009, 00:50 G'zOne C711 Boulder
C711 G'zOne Boulder DLL
C711 G'zOne Boulder USB Driver
CHMC PST
all OEM
Don't forget to click the Thanks Button
where is the links lol
river2surf 29-10-2009, 12:56 can't find the file. Any suggestions?
If anyone has the files please share I have a paid rapidshare membership I can post them for everyone to download without restrictions
Thanks
pctech101 02-11-2009, 18:50 If anyone has the files please share I have a paid rapidshare membership I can post them for everyone to download without restrictions
Thanks
Bump
Pretty Please
I have searched all over for CHMC PST and cannot find a working link. Could somebody please share. Thank you!
eternallysexxxy 10-11-2009, 22:11 I am posting the dll, drivers the pst and the firmware for the c711 and c211...sorry I do not have the c511 firmware and I actually need that one, if everyone could help that would be great. Til then enjoy the downloads on my 4shared account!!:) I've used all the files and they work great!! The firmware does work for the ones with the disabled camera!!
C211 firmware [Only Registered Users Can See Links]
C711 firmware V9230M15 [Only Registered Users Can See Links]
C711 firmware [Only Registered Users Can See Links]
CHMC PST [Only Registered Users Can See Links]
C711 DLL [Only Registered Users Can See Links]
DRIVER [Only Registered Users Can See Links]
;)
2
|