View Full Version : FREE BLACKBERRY UNLOCKER in one touche
this unlocker is old mfi based version.
it unlocks 7xxx, 8xxx and 9000 blackberry!
THIS UNLOCKER IS A ONE BUTTON UNLOCKER!
YOU JUST HAVE TO PRESS UNLOCK!!!
UNLIKE ALL OTHER UNLOCKERS
it write factory os, clear mep file (unlock), and restore it automaticaly!
YOU JUST HAVE TO PRESS UNLOCK AND WAIT ;o)
only for short time.
please give attention to installation rules.
its a big file, with all you need in it!
it takes some minutes to install, so please let installer work.
once you have donwladed the rar archiv (662 mb)
unpack it and execute the installer programm!
after this you find shortcuts on desktop and in task -> programs/BB_Unlocker
.) If not Installed, install: "Blackberry Desktop SW 40033dt-ml.exe" (you can find it in "c:\MML")
witouth this, software wont work!
.) if you dont have MICROSOFT NETFRAMEWORK installed, then install: "dotnetfx.exe" (you can find it in "c:\MML")
NOW ALL IS READY! ;o)
START UNLOCKING YOUR BLACKBERRY!
start BB_Unlocker by Hari
WAIT, IT TAKES SOME TIME TO START UP MML LOADER TO.
connecnt your blackberry (ALL WITHOUT BATTERY ONLY 9000 WITH BATTERY)
(let install all drivers) and press "PHONE INFO"
program give out if restore possible or not (SFI FILE AVIALE) if not,
you must flash afte unlock.
press "RESTART" disconnect blackberry and reconnect it again (WAIT AS LONG AS YOUR BLACKBERRY IS CONNECTED´)
PRESS "UNLOCK" and wait till you see "MEP sucessfully cleared"
now press ok and wait till my programm restore your blackberry.
when you see "DONE!" in prozessbar, means you can disconnect your unlocked blackberry and you are finished with unlocking.
folow extact my instruction if you dont want to brick your blackberry!
ATTENTION: IF YOU HAVE SET A PASSWORD, YOU MUST DISABLE IT,
OR MY UNLOCKER CANT DETECT YOUR BLACKBERRY.
please give results...
maby i post my new version witouth MFI loader,
but if i see the software any other place as here in forum,
i never post a software again!!!!!
ATTENTION:
for all blackberrys you must connect witouth battery!!!
only for 9000 blackberry you need battery (but 9000 unlocking is a litte bit buggy at the moment).
HERE ALL FILES IN MEGAUPLOAD
PARTE 1
[Only Registered Users Can See Links]
PARTE 2
[Only Registered Users Can See Links]
PARTE 3
[Only Registered Users Can See Links]
PARTE 4
[Only Registered Users Can See Links]
PARTE 5
[Only Registered Users Can See Links]
PARTE 6
[Only Registered Users Can See Links]
PARTE 7
[Only Registered Users Can See Links]
Rapidshare
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
Thanks to HARI ]
this unlocker is old mfi based version.
it unlocks 7xxx, 8xxx and 9000 blackberry!
THIS UNLOCKER IS A ONE BUTTON UNLOCKER!
YOU JUST HAVE TO PRESS UNLOCK!!!
UNLIKE ALL OTHER UNLOCKERS
it write factory os, clear mep file (unlock), and restore it automaticaly!
YOU JUST HAVE TO PRESS UNLOCK AND WAIT ;o)
only for short time.
please give attention to installation rules.
its a big file, with all you need in it!
it takes some minutes to install, so please let installer work.
once you have donwladed the rar archiv (662 mb)
unpack it and execute the installer programm!
after this you find shortcuts on desktop and in task -> programs/BB_Unlocker
.) If not Installed, install: "Blackberry Desktop SW 40033dt-ml.exe" (you can find it in "c:\MML")
witouth this, software wont work!
.) if you dont have MICROSOFT NETFRAMEWORK installed, then install: "dotnetfx.exe" (you can find it in "c:\MML")
NOW ALL IS READY! ;o)
START UNLOCKING YOUR BLACKBERRY!
start BB_Unlocker by Hari
WAIT, IT TAKES SOME TIME TO START UP MML LOADER TO.
connecnt your blackberry (ALL WITHOUT BATTERY ONLY 9000 WITH BATTERY)
(let install all drivers) and press "PHONE INFO"
program give out if restore possible or not (SFI FILE AVIALE) if not,
you must flash afte unlock.
press "RESTART" disconnect blackberry and reconnect it again (WAIT AS LONG AS YOUR BLACKBERRY IS CONNECTED´)
PRESS "UNLOCK" and wait till you see "MEP sucessfully cleared"
now press ok and wait till my programm restore your blackberry.
when you see "DONE!" in prozessbar, means you can disconnect your unlocked blackberry and you are finished with unlocking.
folow extact my instruction if you dont want to brick your blackberry!
ATTENTION: IF YOU HAVE SET A PASSWORD, YOU MUST DISABLE IT,
OR MY UNLOCKER CANT DETECT YOUR BLACKBERRY.
please give results...
maby i post my new version witouth MFI loader,
but if i see the software any other place as here in forum,
i never post a software again!!!!!
ATTENTION:
for all blackberrys you must connect witouth battery!!!
only for 9000 blackberry you need battery (but 9000 unlocking is a litte bit buggy at the moment).
HERE ALL FILES IN MEGAUPLOAD
PARTE 1
[Only Registered Users Can See Links]
PARTE 2
[Only Registered Users Can See Links]
PARTE 3
[Only Registered Users Can See Links]
PARTE 4
[Only Registered Users Can See Links]
PARTE 5
[Only Registered Users Can See Links]
PARTE 6
[Only Registered Users Can See Links]
PARTE 7
[Only Registered Users Can See Links]
thanks but part 1 is not available can u help
thanks
thanks but part 1 is not available can u help
thanks
Sorry . i can´t .
only for short time.
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
Hi Bro !
Link died , have many forum post this link but link not work same.:(
dead man inc 11-02-2009, 12:28 this is a good unlocker by far
LL LINK HAS BEEN DELECTED CANT SOMEONE POST I WORKING PLS I NEED THIS FILE
hitibiti 11-02-2009, 16:12 pls put working link let's unlocker test you solution if it work or not !
torrent downloading
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
DEBRANDING - Prosumer Data FREE UNLOCK - SUCCESS !!
Complete respect to the people who did each step on their own and took time to write down the procedure) I just hope people dont have to worry about going crazy searching –
so its all here below –
WHAT YOU NEED –
1. BB Desktop Manager installed.
2. Your Phones Latest OS downloaded and installed and Vendor.xml deleted
3. MFI Multiloader 2.0.1.3 installed.
4. The VSM File STEPS I FOLLOWED.
1. Open MML and connect your phone and let MML continue its procedure till your see "1" on your phones screen.
2. Now disconnect your Phone and type "START" on your phone - You should now see " No Application Linked(Factory OS) " on your phones screen. You would normally just install/restore your OS using Blackberry DM now and your phone would be SIM unlocked. But we now need to change the VSM file, in order to change the Vendor ID, before we install the OS.
3. Keep the Internet disconnected and open MML and untick "AUTO START"
4. Now on your computer keyboard press CTRL+ALT+SHIFT+F12 to get the secret hidden menu in MML
5. NOW connect your phone.
6. Click on LOAD VSM and Choose the VSM file that your have downloaded earlier - Press "OK" Once the VSM File successfully installed.
7. Now Open Blackberry Desktop Manager and Install / Restore the Latest OS you want. When you start up your phone, you will have DE-BRANDED and a new Vendor ID. I used the VSM attached for myself and it worked. This DE-BRANDED and now my phones "DATA UNLOCKED" as well and SIM UNLOCKED as well - All in One.
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
password: bb
kortatus 12-02-2009, 02:02 [Only Registered Users Can See Links]
part 2 no work the file is damaged.
help.
thanks in advance.:(
Amir-SkillZ 12-02-2009, 08:55 [Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
password: bb
Here r Correct LINKs BRo
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
sir what is deferants..plz tell me
Amir-SkillZ 12-02-2009, 09:12 different what its a unlocker works in one click...
and i just corrected download links MORE info is
------------------------------------------------------------
HEY!
I DONT PLANED TO GIVE IT FREE FOR ALL NOW, BUT NOW ITS FREE, SO USE IT AND HAVE FUN WITH IT!
SOFTWARE WORKING 100% WITH SAME MODELS LIKE MFI LOADER BECOUSE IT USES MFI LOADER FOR CLEAR MEP ZONE.
you can unlock if sfi file is aviable, if not you can unlock too, but you must flash it after unlock or just insert and rename the right sfi file.
i planed to give software later for free, when i completed my new version witouth the need of mfi loader and with support of other blackberrys.
i never sould a software from me (haris dct4 calc, siemens tp station 1 to 3, SBM-Repair for UFS, HWK STRING ACITVATIOR and many many more) so its all free.
so use it, it has no virus, but dont forget zu thanks...
ps: it was first given to some members to GUAR FORUM for testing, but some trusted ppl give it away...
so all can use it now...
my newer version in future i give only spezial trusted user, becouse software is not complete and not complete testet (it working, but have bug´s with some models).
please next time wait for finished product...
its to big to load it to my website...
and i have deleted rapidshare links, becouse i dont whanted to give buggy version for free and the main reason is becouse it uses blackberry software and i dont whant become problems with them, but now its to late...
but i thinks some ppl upload it already to rapidshare.
i have uploaded it to my ftp server, but my internet speed gone to zero becouse
to mutch ppl downloading, so i cant have it on my server.
this software sould work mutch easyer than all other existing solutions, and it works.
.) UNLOCK TIME FOR MUST BLACKBERRYS: 2:25 minits...
.) no problem with mmc.
.) no flashing needed.
.) one button klick for unlocking...
.) no searching for sfi files...
.) no installation problems with cracked mfi.
.) after install, mfi works witout modefikations...
DONT FORGET YOUR THANKS!
THANKS
hari
Harald K. (ooxtcoo)
[Only Registered Users Can See Links]
ps:
my software was posted 3-4 times here, but gets deleleted becouse
i dont wantet to give it now for all free, becouse its not finished product...
i give it only some ppl for testing..., but some user posted it every where
to get some thanks...
Thx oOXTCOo bro
I LOVE ALL HELPER 12-02-2009, 09:18 GOOD JOB .
;)
gondalmbdin 12-02-2009, 09:34 THANKS FOR GOOD SHARING.
;)
Zeeshanawan 12-02-2009, 10:43 DEBRANDING - Prosumer Data FREE UNLOCK - SUCCESS !!
Complete respect to the people who did each step on their own and took time to write down the procedure) I just hope people dont have to worry about going crazy searching –
so its all here below –
WHAT YOU NEED –
1. BB Desktop Manager installed.
2. Your Phones Latest OS downloaded and installed and Vendor.xml deleted
3. MFI Multiloader 2.0.1.3 installed.
4. The VSM File STEPS I FOLLOWED.
1. Open MML and connect your phone and let MML continue its procedure till your see "1" on your phones screen.
2. Now disconnect your Phone and type "START" on your phone - You should now see " No Application Linked(Factory OS) " on your phones screen. You would normally just install/restore your OS using Blackberry DM now and your phone would be SIM unlocked. But we now need to change the VSM file, in order to change the Vendor ID, before we install the OS.
3. Keep the Internet disconnected and open MML and untick "AUTO START"
4. Now on your computer keyboard press CTRL+ALT+SHIFT+F12 to get the secret hidden menu in MML
5. NOW connect your phone.
6. Click on LOAD VSM and Choose the VSM file that your have downloaded earlier - Press "OK" Once the VSM File successfully installed.
7. Now Open Blackberry Desktop Manager and Install / Restore the Latest OS you want. When you start up your phone, you will have DE-BRANDED and a new Vendor ID. I used the VSM attached for myself and it worked. This DE-BRANDED and now my phones "DATA UNLOCKED" as well and SIM UNLOCKED as well - All in One. You can download the VSM i used from here...
[Only Registered Users Can See Links]
CHK DIS LINK
[Only Registered Users Can See Links]
ANYONE HAS SUCESSFUL UNLOCKED PHONE WITH THIS SW?BR
new download links:
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
Download
Extract...
You'll get one big rar
Password for rarfile is: bb
Jim.mahoney 20-02-2009, 22:50 This program was posted exclusive to GUAR Forum, those that post it here do it without the originators approval in an effort to get get credit for themselves.
How low can you go?
manole you are right. They are only try to get credit for what they dint work for.
xmenabbas 14-03-2009, 10:41 all member and gsm master thanks you
blackberry unlock what is risk :confused:
no risk ,tested in 8100 and 8800 succesfull ; take around five to six minutes to unlock and restore .
ramramcharan 16-03-2009, 08:59 Hi i will like help on re flash my 8310
Please help
ram:(
_So-Fresh_ 26-03-2009, 23:45 RIM BLACKBERRY 7xxxx 8xxx 9xxx Unlocker
by: Harald Kubovy [Only Registered Users Can See Links]
8120 found...
Starting...
Hardware ID: 8120
Bootrom: 5.3.0.6
APP Version: 4.3.0.67
DSPOS Version: 2.6.0.40
SFI File: 8120-v4.3.0.67_P2.6.0.40.sfi
Timeout: 115000
BLACKBERRY RESTORE FILE NOT AVIABLE! :o(
YOU MUST FULL FLASH YOUR PHONE AFTER UNLOCK!
Reading Phone Info...
Loading loader...
Loading Factory OS...
8120 found...
Starting...
Hardware ID: 8120
Bootrom: 5.3.0.6
APP Version: 4.3.0.67
DSPOS Version: 2.6.0.40
SFI File: 8120-v4.3.0.67_P2.6.0.40.sfi
Timeout: 115000
BLACKBERRY RESTORE FILE NOT AVIABLE! :o(
YOU MUST FULL FLASH YOUR PHONE AFTER UNLOCK!
BOOTING BLACKBERRY WITH LOADER: MFI-15780-020
i dont what it means? i tried a lot of time still like that? any help and i check my phone still lock,,,
yes flash it and thats all
arshad786 27-03-2009, 11:51 Here r Correct LINKs BRo
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
bro can u upload these file to madiafire.com coz i alway got errore when try to downlod free here
T-Connection 03-04-2009, 09:39 i try it several times and not working
noktagsm 06-04-2009, 15:32 thankss friends :)
[Only Registered Users Can See Links]
KANSRVERO 16-04-2009, 01:23 Links do not work, please upload new links.
Thank you
phuthanhtvt 17-04-2009, 22:30 for children it has to Vietnamese blackberry ???:rolleyes::rolleyes:
RapidShare Links:
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
alcapone 03-05-2009, 20:15 thanks for nice job brother
edwin056 09-05-2009, 21:51 RapidShare Links:
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
ist here,, thabks every body
Last link is work. Thanks!!
Hariom123 24-05-2009, 17:18 torrent downloading
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
very useful post bro torrent
thanks bro
Hariom
can't install due to language problems, any advice?
I have Windows Vista
Ali@in@uk 28-05-2009, 17:45 this unlocker is old mfi based version.
it unlocks 7xxx, 8xxx and 9000 blackberry!
THIS UNLOCKER IS A ONE BUTTON UNLOCKER!
YOU JUST HAVE TO PRESS UNLOCK!!!
UNLIKE ALL OTHER UNLOCKERS
it write factory os, clear mep file (unlock), and restore it automaticaly!
YOU JUST HAVE TO PRESS UNLOCK AND WAIT ;o)
only for short time.
please give attention to installation rules.
its a big file, with all you need in it!
it takes some minutes to install, so please let installer work.
once you have donwladed the rar archiv (662 mb)
unpack it and execute the installer programm!
after this you find shortcuts on desktop and in task -> programs/BB_Unlocker
.) If not Installed, install: "Blackberry Desktop SW 40033dt-ml.exe" (you can find it in "c:\MML")
witouth this, software wont work!
.) if you dont have MICROSOFT NETFRAMEWORK installed, then install: "dotnetfx.exe" (you can find it in "c:\MML")
NOW ALL IS READY! ;o)
START UNLOCKING YOUR BLACKBERRY!
start BB_Unlocker by Hari
WAIT, IT TAKES SOME TIME TO START UP MML LOADER TO.
connecnt your blackberry (ALL WITHOUT BATTERY ONLY 9000 WITH BATTERY)
(let install all drivers) and press "PHONE INFO"
program give out if restore possible or not (SFI FILE AVIALE) if not,
you must flash afte unlock.
press "RESTART" disconnect blackberry and reconnect it again (WAIT AS LONG AS YOUR BLACKBERRY IS CONNECTED´)
PRESS "UNLOCK" and wait till you see "MEP sucessfully cleared"
now press ok and wait till my programm restore your blackberry.
when you see "DONE!" in prozessbar, means you can disconnect your unlocked blackberry and you are finished with unlocking.
folow extact my instruction if you dont want to brick your blackberry!
ATTENTION: IF YOU HAVE SET A PASSWORD, YOU MUST DISABLE IT,
OR MY UNLOCKER CANT DETECT YOUR BLACKBERRY.
please give results...
maby i post my new version witouth MFI loader,
but if i see the software any other place as here in forum,
i never post a software again!!!!!
ATTENTION:
for all blackberrys you must connect witouth battery!!!
only for 9000 blackberry you need battery (but 9000 unlocking is a litte bit buggy at the moment).
HERE ALL FILES IN MEGAUPLOAD
PARTE 1
[Only Registered Users Can See Links]
PARTE 2
[Only Registered Users Can See Links]
PARTE 3
[Only Registered Users Can See Links]
PARTE 4
[Only Registered Users Can See Links]
PARTE 5
[Only Registered Users Can See Links]
PARTE 6
[Only Registered Users Can See Links]
PARTE 7
[Only Registered Users Can See Links]
part one of all megaupload.com is missing plz plz help me out
this link does not exist
[Only Registered Users Can See Links]
I already followed this instruction and installed everything it says i need to install before to installing the software and still have language compatibility issues
lilshorty 30-05-2009, 04:07 after i unlock i flash sofotware back to phone and get invalid sim on phone.
can some one give me a hand
It's not in english.....?
most_powerful 15-08-2009, 14:44 Has anyone managed to successfully unlock a BB phone with it yet? please post here and also please give some instructions on how you did it. tnx
this unlocker is old mfi based version.
it unlocks 7xxx, 8xxx and 9000 blackberry!
THIS UNLOCKER IS A ONE BUTTON UNLOCKER!
YOU JUST HAVE TO PRESS UNLOCK!!!
UNLIKE ALL OTHER UNLOCKERS
it write factory os, clear mep file (unlock), and restore it automaticaly!
YOU JUST HAVE TO PRESS UNLOCK AND WAIT ;o)
only for short time.
please give attention to installation rules.
its a big file, with all you need in it!
it takes some minutes to install, so please let installer work.
once you have donwladed the rar archiv (662 mb)
unpack it and execute the installer programm!
after this you find shortcuts on desktop and in task -> programs/BB_Unlocker
.) If not Installed, install: "Blackberry Desktop SW 40033dt-ml.exe" (you can find it in "c:\MML")
witouth this, software wont work!
.) if you dont have MICROSOFT NETFRAMEWORK installed, then install: "dotnetfx.exe" (you can find it in "c:\MML")
NOW ALL IS READY! ;o)
START UNLOCKING YOUR BLACKBERRY!
start BB_Unlocker by Hari
WAIT, IT TAKES SOME TIME TO START UP MML LOADER TO.
connecnt your blackberry (ALL WITHOUT BATTERY ONLY 9000 WITH BATTERY)
(let install all drivers) and press "PHONE INFO"
program give out if restore possible or not (SFI FILE AVIALE) if not,
you must flash afte unlock.
press "RESTART" disconnect blackberry and reconnect it again (WAIT AS LONG AS YOUR BLACKBERRY IS CONNECTED´)
PRESS "UNLOCK" and wait till you see "MEP sucessfully cleared"
now press ok and wait till my programm restore your blackberry.
when you see "DONE!" in prozessbar, means you can disconnect your unlocked blackberry and you are finished with unlocking.
folow extact my instruction if you dont want to brick your blackberry!
ATTENTION: IF YOU HAVE SET A PASSWORD, YOU MUST DISABLE IT,
OR MY UNLOCKER CANT DETECT YOUR BLACKBERRY.
please give results...
maby i post my new version witouth MFI loader,
but if i see the software any other place as here in forum,
i never post a software again!!!!!
ATTENTION:
for all blackberrys you must connect witouth battery!!!
only for 9000 blackberry you need battery (but 9000 unlocking is a litte bit buggy at the moment).
HERE ALL FILES IN MEGAUPLOAD
PARTE 1
[Only Registered Users Can See Links]
PARTE 2
[Only Registered Users Can See Links]
PARTE 3
[Only Registered Users Can See Links]
PARTE 4
[Only Registered Users Can See Links]
PARTE 5
[Only Registered Users Can See Links]
PARTE 6
[Only Registered Users Can See Links]
PARTE 7
[Only Registered Users Can See Links]
Hi does any one have "Part 1" of this megaupload that i can get thanks.
jun.paragas 22-09-2009, 19:16 hello
Rapidshare
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
[Only Registered Users Can See Links]
PLS NEED FREE FLASHER BLACKBERRY 7100
kimstephen 08-10-2009, 00:37 How do you "flash" your blackberry?
Do I need software for this?
Thanks ;)
itexchange 20-10-2009, 12:34 can support for the blackberry 8707v??
tanman8719 21-10-2009, 03:57 hi i download all the files from step 1 to 7 but im still missing the blackberry unlocker software.. can anyone plz send a link..
many thanks
WHERE CAN I GET A DRIVER
FOR SACH-U310?
2
|
|