IF YOU EVER ENCOUNTER BROWN CID49 phone with LOCKED OTP and PAF set
DB2000/DB2010 procedure:
If SETool reports:
OTP LOCKED:1 CID:49 PAF:1 IMEI:359061000XXXXX CERT:BROWN
you MUST do following:
settings, UNCHECK "revert to red"
semc tab, CID CHANGE=current
add in firmware tab
for K750/W700 - eroms\w700red_erom.ssw.cry
for w810/z530/k310/k510/z550 - eroms\w810_erom_red49.cry
and press flash. Retail EROM will be written and you can service phone as usual.
NOTE! IF YOU NOT MAKE IT - YOU WILL NEED TO EXECUTE RESET OPERATION.
DB2020 procedure:
(Not mandatory, like the above, but necessary to service the phone through SERVER)
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
switch to SEMC tab, select correct model and select correct conversion EROM
(please see emptyboard filling article to know which EROM is correct)
press flash.
your phone is RED and ready to flash using signed mode.
|