Страница 1 из 2 12 ПоследняяПоследняя
Показано с 1 по 12 из 17

Тема: SPC (сервисный код провайдера)

  1. #1
    Newbie
    Регистрация
    26.08.2006
    Адрес
    Тирасполь
    Сообщений
    14
    Спасибо
    0
    Благодарностей: 0 : 0

    SPC (сервисный код провайдера)

    Кто знает SPC, особенно на Telit x95? Или на другие телефоны. Пишите, копайте, кидайте ссылки. Это важно!

  2. #2
    Newbie
    Регистрация
    26.08.2006
    Адрес
    Тирасполь
    Сообщений
    14
    Спасибо
    0
    Благодарностей: 0 : 0
    Например, у меня длина SMS - 126 символов, у коллег - 96 и 106 максимум. Телефоны у всех Telit x95c. Может, если войти с помощью сервисного кода, то можно, блин это изменить до 160 (максимум, поддерживается 169). Кто знает???

  3. #3
    Newbie
    Регистрация
    26.08.2006
    Адрес
    Тирасполь
    Сообщений
    14
    Спасибо
    0
    Благодарностей: 0 : 0
    [B] ДЕРЖИТЕ СЕРВИСНЫЕ КОДЫ ПОД CDMA телефоны

    AnyDATA AMC 450 Code for Programming Mode:
    NAM Programming:[*][7][4][2][6][9][#][*][7][4][8][#][9][6][1][4][8][0][6][3][SEL]

    AUDIOVOX
    Audiovox 100 130 135 8300 8450 8500 8600 8610 8900 8910 8912 8920 Code for Programming Mode:
    NAM Programming: [#][#][2][0][0][2][2][0][0][2][PWR][SPC]
    NAM Programming: [#][#][8][4][7][4][4][6][PWR][ 111111 ]
    Debug Menu: [#][#][2][7][7][3][2][7][2][6][PWR]
    Audiovox 4000 9000 9100 9155 9500 Code for Programming Mode:
    NAM Programming: [2][8][9][fcn][#][1]
    Debug menu: [fcn][0][0][fsc]
    Test Mode: Pres [2][*][Rcl][Power]

    Audiovox 107 Code for Programming Mode:
    NAM Programming: [4][5][6][8][0][*][4][7][*][8][6][9][#][1]

    Audiovox 9950 Code for Programming Mode:
    NAM Programming: [#][#][3][2][8][2]

    CURITEL
    Curitel 100 510 520 Code for Programming Mode:
    NAM Programming: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
    Field Teste: [#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]
    Enter A-KEY: [2][5][3][9][*][*]
    Debug Menu: [#][#][2][7][7][3][2][7][2][6][PWR]
    SAR Test: [#][#][2][7][7][5][2][3][4][5][PWR]
    Baud rate: [#][#][3][6][*][*][PWR]
    DM mode Enable:[*][*][1][0][0][4][PWR]
    DS mode Enable:[*][*][1][0][0][5][PWR]
    Test Bell/Led/Voice/Dot: [#][#][1][1][2][2][PWR]
    RF mode: [#][#][2][2][4][0][PWR]
    RAS RAM: [#][#][2][7][7][4][PWR]
    CMUX 1:[*][*][0][4][8][1][PWR]
    CMUX 2:[*][*][0][4][8][2][PWR]
    RX mode FAX:[*][*][0][4][9][2][PWR]
    RX mode DATA:[*][*][0][4][9][1][PWR]
    RX mode RESET:[*][*][0][4][9][0][PWR]

    P.S. Строка инициализации модема CURITEL HX-510B: AT+CRM+150

    Curitel 525 550 Code for Programming Mode:
    Debug Menu: [#][#][*][1][9][3][*][7][6][2][5][3][4][#][*][PWR]
    SCI DTMF TYPE: [#][#][1][3][*][9][2][*][#][6][2][*][PWR]
    TEST BELL VIB LCD VOICE: [#][#][2][2][6][3][5][*][2][6][2][*][PWR]
    CMUX 1:[*][*][*][1][2][*][#][8][1][1][#][PWR]
    CMUX 2:[*][*][*][3][7][*][#][9][2][2][*][PWR]
    RX MODE RESET:[*][*][*][6][4][*][#][1][3][3][#][PWR]
    RX MODE DATA:[*][*][*][8][3][*][#][2][4][7][*][PWR]
    DS MODE ON:[*][*][*][1][2][0][4][5][#][*][#][PWR]
    RF NV INIT: [#][#][0][*][#][*][6][3][8][6][1][8][2][9][3][7][2][#][PWR]
    RAS_RAM: [#[#[3][*][1][3][0][9][1][#][1][2][7][9][#][*][PWR]

    ERICSSON
    Ericsson A1228C T61 Code for Programming Mode:
    Nam Programming Shot: [9][8][7][ MENU ]
    Nam Programming Long: [9][2][3][8][8][5][ MENU ][ SPC CODE ]
    CDMA mode: [9][0][4][0][9][3][ MENU ]
    Analog mode: [9][0][4][0][9][5][ MENU ]
    DM mode: [9][0][4][0][5][0][ MENU ]

    Ericsson T608 Code for Programming Mode:
    NAM Programming: [#][#][0][6][#]
    Nam Programming Shot: [9][8][7][ Joystick >]
    Nam Programming Long: [2][2][2][6][5][2][ Joystick >]
    Network Vocoder rate: [#][#][8][6][2][6][3][3][7][ Joystick >]
    SW Version, ESN, PRL info: [9][#][4][#][3][#][ Joystick >]
    Debug Screen: [#][#][3][3][2][8][4][ Joystick >]
    Enabling TTY: [#][#][8][8][9][ Joystick >]
    CAI_REV 1 OR 6: [#][#][7][7][3][8][ Joystick >]
    Edit Profile, Defaults Data Set: [#][#][3][2][8][2][ Joystick >]
    Life Timer: [#][#][7][8][6][ Joystick >]

    GTRAN
    Gtran 2000 Code for Programming Mode:
    NAM Programming Mode: [0][1][#][7][3][7][ SPC CODE ]
    Debug menu: [0][1][#][3][2][4][ SPC CODE ]
    Debug Screen: [0][1][#][7][2][7]
    Test mode: [0][1][#][7][6][4][ SPC CODE ]
    System test mode: [0][1][#][7][6][8][ SPC CODE ]

    Gtran GCP 5000 Code for Programming Mode:
    NAM Programming: [0][1][#][6][2][6]
    Debug Screen: [0][1][#][7][2][7]
    Test mode: [0][1][#][7][6][5]
    HUAWEI-R:[*][#][4][8][2][9][3][4][7]
    HUAWEI-C:[*][#][4][8][2][9][3][4][2]

    Giga Telecom
    GIGA Z 510 Code for Programming Mode :
    NAM Programming: [ MENU ][0][ SPC CODE ]

    GIGA Z 710i (GCD-456) Code for Programming Mode :
    NAM Programming: [ MENU ][0][ SPC CODE ]

    HUAWEI
    Huawei ETS 388 668 678 688 Code for Programming Mode :
    Test mode: [#][#][2][MENU][ Field service code ]
    RF call: [#][#][5][Menu]
    Debug screen: [#][#][4][4][Menu]
    Debug screen: [#][#][3][3][Menu]
    NV reset: [#][#][1][2][3][Menu]
    CDG2 Test enable: [#][#][2][3][4][Menu]
    CDG2 Test disable: [#][#][4][3][2][Menu]
    Home only off: [#][#][4][6][0][Menu]
    Home only on: [#][#][4][6][1][Menu]
    Setup ChinaTelecom: [#][#][5][5][1][Menu]
    Setup SkyLink: [#][#][5][5][2][ Menu]
    Setup Dialog: [#][#][5][5][3][ Menu]
    Initializing Phone: [#][#][7][7][7][Menu]
    Enable to UIM and UIMless sw version: [#][#][8][4][6][Menu]
    Setup factory mode only possible UIM sw version: [#][#][8][6][4][Menu]
    Block debug code / Free debug code: [#][#][8][8][8][Menu]
    Enable UTK Mode: [#][#][8][8][5][Menu]
    Enable security mode: [#][#][4][5][6][2][5][8][#][#][menu][Service code ]
    Use any card:[*][1][1][7][0][4][9][9][7][6][#]

    HYUNDAI
    Hyundai HWP-110 Code for Programming Mode:
    NAM Programming: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]
    DM Mode: [#][#][2][7][4][0][*]

    Hyundai HGC 120e 130e Code for Programming Mode:
    NAM Programming: [#][8][6][9][0][4][*][*][8][9][3][9][7][#]

    Hyundai HGC 310 600 610 Code for Programming Mode:
    NAM Programming: [#][#][2][0][0][2][2][0][0][2][PWR][1][ SPC CODE ]
    Field Teste: [#][#][2][0][0][2][2][0][0][2][PWR][1][ MASTER CODE ]

    KYOCERA
    Kyocera 2035 2135 2255 2345 5135 6035 KX4X4 SE47 Code for Programming Mode:
    Nam Programming: [1][1][1][1][1][1][OK][Programming][Spc code]
    CAI Change: [#][#][7][7][3][8][ok]
    Enable TTY: [#][#][8][8][9][ok]
    Life Timer, PRL, etc: [#][#][7][8][6][ok]
    A-key: [#][#][2][5][3][9][ok]
    A-key: [2][5][3][9][ok]

    LG Electronics
    Lg LGC 300 Code for Programming Mode:
    NAM Programming: [ MENU ][9][ SPC CODE ]
    A-Key: PUSH [ STO ] 3 SEC. [2][5][3][9][*][*]

    Lg LGC 330w Code for Programming Mode:
    NAM Programming: [ MENU ][4][0][ SPC CODE ]
    A-Key: [2][5][3][9][*][*]

    Lg LGC 800w 500 Code for Programming Mode:
    NAM Programming: [ MENU ][9][0][ SPC CODE ]
    Debug Mode: [ MENU ][7][0][ FSC CODE ]
    Debug Mode: [ MENU ][8][0][ FSC CODE ]
    A-Key: [2][5][3][9][*][*]

    Lg LGC 510 Code for Programming Mode:
    NAM Programming: [ MENU ][3][0][ SPC CODE ]
    A-Key: [2][5][3][9][*][*]

    MOTOROLA
    Motorola 7760 7860 2260 8160 Code for Programming Mode:
    NAM Programming: [ FCN ][0][0][0][0][0][0][0][0][0][0][0][0][0][ RCL ]
    Test Mode: [ FCN ][0][0][*][*][8][3][7][8][6][6][3][3][ STO ]

    Motorola V60c V120 Code for Programming Mode:
    NAM Programming: [7][4][6][6][3][#][Menu][Menu][ SPC CODE ]
    Test Mode: [Menu][0][7][3][8][8][7][*][ SPC CODE ]

    Motorola v710 v730 v740 Code for Programming Mode:
    NAM Programming: [8][3][7][8][*][#] press 3 times NATE [0][7][1][0][8][2]
    Test Mode: [Menu][0][7][3][8][8][7][*][0][7][1][0][8][2]
    Service Menu: [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]

    Motorola v720 Code for Programming Mode:
    NAM Programming: [0][7][3][8][8][7][*]
    Test mode: [8][3][7][8][*][#][Pres Tape Butone 3 Time]

    Motorola V6060 Code for Programming Mode:
    NAM Programming: [1][4][7][*][3][6][9][#][4][5][6][*][0][#]

    Motorola MC150 Code for Programming Mode:
    NAM Programming: [0][1][7][0][8][2]
    Test mode: [8][3][7][8][*][#][Pres Slide Buton 3 Time]

    Motorola MC200 MC230 MC250 MC280 MC300 MC500 Code for Programming Mode:
    NAM Programming: [5][7][5][9][7][8][9][*][#][Cam Buton 3 Time][9][1][5][0][3][7]

    Motorola MC550 Code for Programming Mode:
    NAM Programming: [5][7][5][9][7][8][9][*][#][Hold Buton 3 Time][9][1][5][0][3][7]

    NOKIA
    Nokia 5185 2112 3285 6225 6585 8280 Code for Programming Mode:
    NAM Programming:[*][3][0][0][1][#][1][2][3][4][5][#]
    Software version:[*][#][8][3][7][#]
    Software version:[*][#][9][9][9][9][#]
    Serial / ESN:[*][#][9][2][7][7][2][6][8][9][#]
    Phone restart:[*][#][7][5][6][8][1][#]
    Phone restart:[*][#][7][5][6][8][2][#]

    Nokia 8587 Code for Programming Mode:
    NAM Programming:[*][#][6][2][6][#][7][7][6][4][7][2][6][#]
    Version:[*][#][0][0][0][0][#]
    Vocoder:[*][#][3][8][7][2][#]
    Debug Screen:[*][#][8][3][7][8][#]
    Debug:[*][#][8][3][8][0][#]
    Field test menu:[*][#][8][3][7][8][8][#]

    Nokia 8887 Code for Programming Mode:
    NAM Programming:[*][3][0][0][1][#][1][2][3][4][5][#]
    Version:[*][#][0][0][0][0][#]
    EVRC:[*][#][8][3][7][8][#]
    SERIAL:[*][#][9][2][7][7][2][6][8][9][#]

    PANTECH
    Pantech HX550C Code for Programming Mode:
    Debug Menu: [#][#][*][1][9][3][*][7][6][2][5][3][4][#][*][PWR]
    SCI DTMF TYPE: [#][#][1][3][*][9][2][*][#][6][2][*][PWR]
    TEST BELL VIB LCD VOICE: [#][#][2][2][6][3][5][*][2][6][2][*][PWR]
    CMUX 1:[*][*][*][1][2][*][#][8][1][1][#][PWR]
    CMUX 2:[*][*][*][3][7][*][#][9][2][2][*][PWR]
    RX MODE RESET:[*][*][*][6][4][*][#][1][3][3][#][PWR]
    RX MODE DATA:[*][*][*][8][3][*][#][2][4][7][*][PWR]
    DS MODE ON:[*][*][*][1][2][0][4][5][#][*][#][PWR]
    RF NV INIT: [#][#][0][*][#][*][6][3][8][6][1][8][2][9][3][7][2][#][PWR]
    RAS_RAM: [#[#[3][*][1][3][0][9][1][#][1][2][7][9][#][*][PWR]

    QUALCOMM
    Qualcomm QCP 800 Code for Programming Mode:
    NAM Programming: [ MENU ][3][0][ SPC CODE ]
    Field test: [ MENU ][7][0][ FSC CODE ]

    Qualcomm QCP 820 Code for Programming Mode:
    Nam Programming:111111+Jog Dial(Ok), Select "Programming:"+Spc

    Qualcomm QCP 860 Code for Programming Mode:
    NAM Programming: [ MENU ][8][0][ SPC CODE ]
    Field test: [ MENU ][5][0][ FSC CODE ]

    SANYO
    Sanyo SCP5300 SCP7300 SCP8100 Code for Programming Mode:
    NAM Programming Mode:[#][#][ SPC CODE ][ OK ][ KEY DOWN ][ OK ]
    SET A-Key: [#][#][2][5][3][9][ OK ][ KEY DOWN ][ OK ]
    View Version: [#][#][*][*][8][3][7][ OK ][ KEY DOWN ][ OK ]

    Debug Mode:
    [ FSC CODE ]=040793
    Debug Menu: [#][#][ FSC CODE ][OK][KEY DOWN][OK]
    VIEW/CHANGE CAI: [#][#][7][7][3][8][OK][KEY DOWN][OK]
    Set Vocoder: [#][#][8][6][2][6][3][3][7][OK][KEY DOWN][OK]
    Reverse Logistic: [#][#][7][8][6][OK][KEY DOWN][OK]
    Set IP Adress: [#][#][2][7][6][9][7][3][7[OK][KEY DOWN][OK]
    Accessibility: (TTY ON/OFF)[#][#][8][8][9][OK][KEY DOWN][OK]
    Advanced Data: [#][#][3][2][8][2][OK][KEY DOWN][OK][MSL CODE]
    Ready Link: [#][#][4][6][3][6][OK][KEY DOWN][OK]
    Browser init: (ON/OFF)[#][#][4][6][8][2][OK][KEY DOWN][OK]
    Picture Token: [#][#][2][5][3][2][7][OK][KEY DOWN][OK]

    Sanyo SCP-A011 SMP-A017 Code for Programming Mode:
    NAM Programming: [F9 Buton 3 Time][0][*][7][2][6][9][6][#][7][6][7]

    SAMSUNG
    Samsung SCH 611 811 N101 A100 A105 A300 A2000 Code for Programming Mode:
    NAM Programming: [4][7][*][8][6][9][#][0][8][#][9]
    Test Mode:[*][7][5][9][#][8][1][3][5][8][0]
    Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
    A-key: [Menu][0][2][5][#][#]
    External Audio: [Menu][0][#][#][#][#]
    Debug Menu: [Menu][8][0][4][1][5]
    Brief NAM Programing: [Menu][4][0][6][2][6] (not all version)
    LCD Contrast: [Menu][4][5] (not all version)
    SIO Mode: [Menu][4][9]
    SIO Mode: [Menu][6][9]

    Samsung SCH e120 e130 e140 e170 e250 e300 etc (E or X-series) Code for Programming Mode:
    NAM Programming: [4][7][*][8][6][9][#][0][8][#][9]
    NAM Programming: [6][5][4][8][#][0][*][*][4][#][6]
    Test Mode: [7][5][9][*][8][1][3][5][8][0]
    Test Mode: [5][8][0][9][5][4][0][*][4][5][6][8][0]
    Debug Menu: Menu (2 time) [0] [6][7][2][5]
    Debug Menu: Menu (2 time) [0] [9][7][2][0]

    Samsung SPH-n240 n400 a460 a500 Code for Programming Mode:
    NAM Programming: [#][#][Spc]
    Test Mode: [4][7][*][8][6][9][#][1][2][3][5]
    Debug Menu: [#][#][3][3][2][8][4][ok]
    Service Menu: [Menu][8][0][#][8][8][9]
    Reset , Clear Memory: [#][#][7][8][6][ok]
    A-key: [#][#][2][5][3][9][ok]
    Label Selection: [#][#][3][8][8][2][ok]
    Label(Home, Work, etc):[*][*][5][2][3][ok]
    NGG Setting (Gateway, etc.): [#][#][2][7][6][9][7][3][7][ok]
    Vocoder: [#][#][8][6][2][6][3][3][7][ok]
    CAI Change: [#][#][7][7][3][8][ok]
    Enable TTY: [#][#][8][8][9][ok]

    Samsung SPH-A610 Code for Programming Mode:
    NAM Programming: [Menu][9][2][*]
    Test Mode: [4][7][*][6][8][#][1][3][5][8][0]
    DM Mode: [Menu][9][*]

    Samsung SCH-A310 SCH-T300 Code for Programming Mode:
    NAM Programming: [Menu][6][*]
    Test Mode: [4][7][*][6][8][#][1][3][5][8][0]
    DM Mode: [Menu][0][*]

    Samsung SCH-N356 Code for Programming Mode:
    NAM Programming: [Menu][6][*]
    Test Mode:[*][*][0][0][#][#]

    Samsung SCH-N380 Code for Programming Mode:
    NAM Programming: [4][7][*][8][6][9][#][0][8][#][9]
    Test Mode: [4][7][*][8][6][9][#][1][2][3][5][8][0]
    Debug Mode: [Menu][5][*]

    SK Teletech
    SKY-IM 1000 1400 2000 2200 2400 3000 Code for Programming Mode :
    NAM Programming Mode: [#][7][5][8][3][5][3][8][3][2][4][#][6][2][6][#]
    Test Mode: [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]

    SKY-IM 6400 Code for Programming Mode :
    NAM Programming Mode:[*][7][5][9][#][3][6][4][*][7][3][8][8][4][6][4][#]

    SKY-IM 7100 7200 7300 7400 8300 8500 Code for Programming Mode :
    NAM Programming:[*][7][5][9][#][3][6][4][*][7][3][8][8][4][6][4][#]
    Min Simple Mode: [#][7][5][8][3][5][3][2][6][6][#][6][4][6][#]
    Test Menu: [#][7][5][8][3][5][3][8][3][2][4][#][8][3][7][8][#]
    Enter A-Key: [#][7][5][8][3][5][3][2][6][6][#][2][5][3][9][#]
    Voice Memo: [#][8][7][6][7][#][2][7][7][#]
    IRM Simple Mode: [#][7][5][8][3][5][3][2][6][6][#][4][7][6][#]
    Change Data: [#][7][5][8][3][5][3][8][3][2][4][#][7][5][2][3][#][8][3][7][8][#]

    SYNERTEK
    Synertek S200 Code for Programming Mode:
    A-KEY: [2][5][3][9][*][*][Save]
    Test mode: [Menu][0][ Field Service Code ]
    Debug screen: [#][#][3][3]][Save]
    Debug screen: [#][#][5][2][3][Save]
    RF Test: [#][#][#][#][Save]
    LCD type change: [#][#][3][2][5][Save]

    Synertek S500 Code for Programming Mode:
    SAR Test Strife test:[*][#][0][0][0][0][#]
    Debug screen:[*][#][8][3][7][8][#]
    Clear LCD:[*][#][8][4][8][3][7][8][#]
    Debug menu, R UIM Enable:[*][#][4][4][3][3][3][6][#]
    CDG , Service option:[*][#][2][3][4][#]
    Function Test, LCD Contrast:[*][#][8][7][8][#]

    TREO

    Treo 600 Code for Programming Mode:
    NAM Programming: [#][#][0][0][0][0][0][0][Call]
    DM Mode: [#][#][3][4][2][4][Call]
    Debug Screen: [#][#][3][3][2][8][4][Call]
    DATA Mode: [#][#][3][2][8][2][Call]
    Technical Information: [#][#][7][8][6][Call]

    TELULAR
    Telular SX6 Code for Programming Mode:
    NAM Programming: [Menu][8]
    Technical Information: [Menu][6][3][Sec code 7 Digits]

    UBIQUAM
    Ubiquam U 100 Code for Programming Mode :
    BREW setup menu: [#][#][2][7][3][9][*][#][7][3][8][*][PWR]

    WITHUS
    Withus wce-100, 200, 300 Code for Programming Mode:
    NAM Programming: [#][#][9][4][8][4][8][7][Save]
    NAM Programming: [#][#][9][4][8][4][8][2][Save]
    WCE-200 ESN write: [#][#][6][6][8][3][5][Save]

    Материал взят с сайта: http://www.skynetwork.ru/

  4. #4
    Member
    Регистрация
    25.08.2006
    Адрес
    kyiv
    Сообщений
    147
    Спасибо
    0
    Благодарностей: 12 : 2

    spc na Telit 95

    как правило 858477

  5. #5
    Member
    Регистрация
    21.12.2003
    Адрес
    odessa
    Сообщений
    362
    Спасибо
    0
    Благодарностей: 8 : 6
    Цитата Сообщение от Asmegini
    [B] ДЕРЖИТЕ СЕРВИСНЫЕ КОДЫ ПОД CDMA телефоны

    Материал взят с сайта: http://www.skynetwork.ru/
    просто ссылку указать никак нельзя было?

  6. #6
    Newbie
    Регистрация
    18.04.2006
    Адрес
    MD
    Сообщений
    4
    Спасибо
    0
    Благодарностей: 0 : 0
    Лови, это разлочник на Vox8930 8910 TX95 ...
    Вложения Вложения
    • Тип файла: rar 8930.rar (289.7 Кб, Просмотров: 258)

  7. #7
    Newbie
    Регистрация
    26.09.2006
    Адрес
    Moldova
    Сообщений
    1
    Спасибо
    0
    Благодарностей: 0 : 0
    А на nokia 6235i не найдется кодов?

  8. #8
    Newbie
    Регистрация
    21.09.2006
    Адрес
    Севастополь
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0
    А чем этот плох?
    NAM Programming:[*][3][0][0][1][#][1][2][3][4][5][#]
    Для всех Nokia он одинаковый.Правда без prl-файла Nokia не всегда сеть не видит

  9. #9
    Newbie
    Регистрация
    08.01.2008
    Адрес
    Воронеж
    Сообщений
    6
    Спасибо
    0
    Благодарностей: 0 : 0
    А для Samsung SPH-A900 есть в наличии?

  10. #10
    Mega Member
    Регистрация
    13.03.2007
    Адрес
    Porto Franco "Odessa"
    Сообщений
    1,963
    Спасибо
    74
    Благодарностей: 118 : 98
    что для А900 нужно ? (определись какая прошива на нем)

  11. #11
    Newbie
    Регистрация
    08.01.2008
    Адрес
    Воронеж
    Сообщений
    6
    Спасибо
    0
    Благодарностей: 0 : 0
    У меня Спринтовская прошивка хотелось бы сервисные коды знать A900? раз уж его мучаю.

  12. #12
    Mega Member
    Регистрация
    13.03.2007
    Адрес
    Porto Franco "Odessa"
    Сообщений
    1,963
    Спасибо
    74
    Благодарностей: 118 : 98
    ##3282#
    ##(SPC)#

    SPC как правило шесть нулей

Похожие темы

  1. Сервисный код sx220
    от faster в разделе Fly для новичков
    Ответов: 3
    Последний ответ: 22.08.2008, 22:23
  2. Ответов: 2
    Последний ответ: 10.08.2007, 21:26
  3. Nokia 6131 сервисный код
    от andrei_galkin в разделе Nokia для новичков
    Ответов: 31
    Последний ответ: 08.08.2007, 19:39

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru