Вышел новый феникс. Текущая версия phoenix_service_sw_2005_20_7_98
Вышел новый феникс. Текущая версия phoenix_service_sw_2005_20_7_98
Последний раз редактировалось cnapkc; 14.07.2005 в 19:28.
Изменения в новой версии
- Support for RH-73, RH-74, RM-56, RM-67, RM-78, RM-79, RM-82, RM-83, RM-84, RM-89, RM-97, RM-99, RM-115, RM-126 and SU-18
- New FLS-4S Driver v 2.07
- New Flash Update Package v 3.29.002
- RF loss table for autotuning updated for new products.
- RF AGC Status window can be used for CDMA phones RM-41 and RM-66.
- Camera control UI has been improved.
- Auto focus testing in camera control UI for RM-42 has been added.
- Transferred image from RM-76 is now deleted.
- Support for 32bit display types is added.
- Display test component shows clear error message for not supported display types.
- If SW-content in BB5 phone for a different product code will be flashed, also the product code will be updated (Swap concept).
- “Full factory set” will be run before flashing for RAE-2, RAE-6 and RAE-4.
- New phone setting for “MMS postcard destination address” can be handled.
- “User Profile save and restore” component is improved.
- GSM autotune function “TX IQ self tuning” and “RX AM Suppression” is improved.
- Autotune start error with Willtek 4400 / Firmware 5.x is corrected
- Misleading “GPIB address field” is removed from
- Menu for RM-43 is changed. “Warranty Information”, “Memory Card Test” and “Ambient Light Sensor Calibration” is removed.
- ************ certificates for RM-19 will be restored after refurbishment.
- “ESN Reconstruction” is renamed to “IMEI/ESN rebuild” for all protocols.
- “File System Format” menu is added for RM-74 and RM-75.
- “TX Power Level Tuning” for RM-74, RM-75 is improved.
- “Phone Information” function is improved.
- “RX Calibartion” menu is improved.
- “Camera Control” now works with NHL-4JX and RH-30
- “Phoenbook” window for CDMA phones can be resized now.
- When a CDMA product is closed then the user is prompted to save or not the PRI or OSA file.
- CDMA flashing with FPS-4S and FPS-8 is improved.
- CDMA flashing error “Failed to restore NAM” is fixed.
- RM-69 display tune works now.
- RH-51 flashing with FLS-4S is working.
- Help for FPS-11 flashing is updated and available with F1
- FPS-11 flashing with slower CPU's for CDMA-flashing and user settings save/load is limited for 4 ports at the same time
- FPS-11 flashing problem with user settings is solved.
- Bigger file sizes are supported now by FPS-11 flashing.
- RX Calibration for RM-58 is improved.
- RX calibration window shows AFC values.
- Phoenix doesn't stuck anymore after closing the connection several times
И опять криво работает с 9300 и 9500.
А взять-то где ???
как это где??? там где и всегда...Автор оригинала к.Немо
А взять-то где ???
https://europe.partners.nokia.com
Те у кого есть пароль и логин и без сообщений в форуме знают, что вышел новый феникс. А когда нет доступа к ресурсу?
Ну и нафига он тебе? У тебя что ли есть донгл??? У меня есть на дисках (полная копия оригинальных от нокиа)... Но он не ставится без донгла Там интерес только прошивки и сервис-мануалы
L()R[)
У меня есть. А доступа нету.
Народ, выложите свеженькую, а?
А где же купить мне донгл, хочу с оригинальным фениксом работать :-) Где и как? А главное за сколько?
InterLooper
На суппорте JAF и Twister воляеться phoenix_service_sw_2005_20_7_98
Ruslan
Мндя. Так оно и есть. Спасибо. Бывает
посмотрите здесь
http://rapidshare.de/users/82T7CU