W630I UNLOCK проблемы

[serg10101]

Пардон не w630i а v630i

Вот лог

GUI v0.91380069/UNI
Card serial:00014630
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
SERVER CREDITS LEFT/USED: 12/12
CARD COUNTERS: FLASH 1, UNLOCK 16
Elapsed:2 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101292993 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:897E
Flash props sent ok
CSloader version:
061027 1723 HANCXC1250562_DB2020_CSLOADER_R3A005
Executing CSCA-based unlock.
Asking for DB2020 EROM signature...
Waiting for calculation process...
signature response "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" (2048)
Error "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" during signature calculation
signoff ok
signature calculation not done,err: 144
Elapsed:11 secs.

Брал v0[1].91380068 и v0[1].91380069 версию-одно и тоже

[the_laser]

а что написано в faq на эту тему ?

[Bodko]

То же самое, но с К800i

GUI v0.91380068/UNI
Card serial:0000ЧЧЧЧ
Loaded 51 flash descriptors
SERVER CREDITS LEFT/USED: 21/15
CARD COUNTERS: FLASH 117, UNLOCK 122
Elapsed:3 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801503341 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:897E
Flash props sent ok
CSloader version:
061027 1723 HANCXC1250562_DB2020_CSLOADER_R3A005
Executing CSCA-based unlock.
Asking for DB2020 EROM signature...
Waiting for calculation process...
signature response "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" (2048)
Error "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" during signature calculation
signoff ok
signature calculation not done,err: 144
Elapsed:17 secs.

Думаю проблема в сервере

[serg10101]

если я правильно понял проблема изза TP так как CID49?

[GEORGIA]

Пардон не w630i а v630i

Вот лог

GUI v0.91380069/UNI
Card serial:00014630
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
SERVER CREDITS LEFT/USED: 12/12
CARD COUNTERS: FLASH 1, UNLOCK 16
Elapsed:2 secs.
SERVER SUPPORT ENABLED.
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35194101292993 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:897E
Flash props sent ok
CSloader version:
061027 1723 HANCXC1250562_DB2020_CSLOADER_R3A005
Executing CSCA-based unlock.
Asking for DB2020 EROM signature...
Waiting for calculation process...
signature response "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" (2048)
Error "SECS error, sgn returned = -6220 (SGN_COMCLIENT_CERT_NOT_FOUND)
" during signature calculation
signoff ok
signature calculation not done,err: 144
Elapsed:11 secs.

Брал v0[1].91380068 и v0[1].91380069 версию-одно и тоже

имхо была,такая проблема,сначала проруссил,думал это вина,на следующий день разлочился,без проблем,вышло вина сервера...

[GEORGIA]

если я правильно понял проблема изза TP так как CID49?

[Bodko]

serg10101 из-за какого ТР, ты что сегодня родился, я в шоке

А Laserу большое спасибо, что напомнил о том, что надо иногда читать, прочитал последний FAQ и сделал телефон за пару минут.

[martyn911]

061027 1723 HANCXC1250562_DB2020_CSLOADER_R3A005

Возможнов этом проблема...

[Bodko]

Другой такой был, последней версией то же самое, попробовал ради опыта v0.91380064, все пошло, но можно и как написано в FAQ

GUI v0.91380069

- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users
reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any
special moves, that is unfair and i shall fix it).
quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be
serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)

[the_laser]

реально, учимся читать....

[serg10101]

звеняйте за бред