Помогите поднять Z710.

[beck]

Весь лог не влезает.

UFxBoot V2.2 (c) SarasSoft 2003. Id: 62 CF 1 7
UFS_USB V2.6 (c) SarasSoft 2005.S/n: 73662
Licence: True
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 32.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: NOR (Sibley) Flash device @ [0x44000000-0x47FFFFFF] 65536 Kb
FSFLASH:   Vendor (0x89): Intel
FSFLASH:   Device: ?????? (0x887E)
FSFLASH:   Unique Device Number: 0xFC64C42610C022C0
FSFLASH:   Page size: -
FSFLASH:   Write Buffer Size: 1024 bytes
FSFLASH:   Burst Mode: ON
FSFLASH: Erase region [0x44000000-0x47FFFFFF] has an erase block size of 256 Kb
FSFLASH: Mounting logical flash device 0
FSFLASH: Flash segment 0:0 located @ [0x45E00000,0x47DFFFFF] (32768 Kb)
FSFLASH:   Flash type:           NOR
FSFLASH:   Block size:          1024
FSFLASH:   Logical erase size:   256 Kb
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 8224 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 10368 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 11424 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 12480 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 107296 bytes requested in total ****
FSFLASH: Write processes started, pid = 0x1002D.
FSFLASH: Erase processes started, pid = 0x1002E.
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Stage 4
FSFLASH: Config block located @ 0x45E00000
FSFLASH:   DELETED block 4019 @ 0x46243400 rolled back
FSFLASH:   DELETED block 6410 @ 0x4649B800 rolled back
FSFLASH:   DELETED block 28967 @ 0x4660E400 rolled back
FSFLASH:   DELETED block 19 @ 0x4667B000 rolled back
FSFLASH:   DELETED block 4 @ 0x466C7400 rolled back
FSFLASH: Mount block located @ 0x466C7800
FSFLASH:   DELETED block 2 @ 0x466C7800 rolled back
FSFLASH:   VALID block 4019 @ 0x466C8C00 is newer
FSFLASH:   VALID block 4 @ 0x466DA000 is newer
FSFLASH:   DELETED block 75 @ 0x466F0400 rolled back
FSFLASH:   VALID block 28967 @ 0x466F1C00 is newer
FSFLASH:   DELETED block 7598 @ 0x46722000 rolled back
FSFLASH:   DELETED block 19 @ 0x46724000 is newer
FSFLASH:   DELETED block 19 @ 0x46724000 rolled back
FSFLASH: Mount block located @ 0x4675BC00
FSFLASH:   DELETED block 2 @ 0x4675BC00 is newer
FSFLASH:   DELETED block 2 @ 0x4675BC00 rolled back
FSFLASH:   VALID block 75 @ 0x46767000 is newer
FSFLASH:   VALID block 5311 @ 0x46778000 is newer
FSFLASH:   VALID block 1802 @ 0x4677AC00 is newer
FSFLASH:   VALID block 5935 @ 0x46783000 is newer
FSFLASH:   DELETED block 30382 @ 0x46786000 rolled back
FSFLASH:   VALID block 3353 @ 0x46791C00 is newer
FSFLASH:   DELETED block 30342 @ 0x467A8800 rolled back
FSFLASH:   DELETED block 19 @ 0x467D9400 is newer
FSFLASH:   DELETED block 19 @ 0x467D9400 rolled back
FSFLASH:   VALID block 3376 @ 0x467EB000 is newer
FSFLASH:   DELETED block 10 @ 0x467EB400 rolled back
FSFLASH:   DELETED block 30382 @ 0x4680C800 is newer
FSFLASH:   DELETED block 30382 @ 0x4680C800 rolled back
FSFLASH:   VALID block 10 @ 0x46835400 is newer
FSFLASH:   VALID block 30431 @ 0x4684A800 is newer
FSFLASH:   VALID block 30429 @ 0x4684DC00 is newer
FSFLASH:   VALID block 4037 @ 0x46853C00 is newer
FSFLASH:   DELETED block 30342 @ 0x46868400 is newer
FSFLASH:   DELETED block 30342 @ 0x46868400 rolled back
FSFLASH:   DELETED block 30382 @ 0x46869800 is newer
FSFLASH:   DELETED block 30382 @ 0x46869800 rolled back
FSFLASH:   VALID block 3365 @ 0x4686C800 is newer
FSFLASH:   VALID block 6410 @ 0x46874800 is newer
FSFLASH:   DELETED block 8037 @ 0x468AF000 rolled back
FSFLASH:   VALID block 30382 @ 0x468BA800 is newer
FSFLASH:   VALID block 4 @ 0x468CB000 is newer
FSFLASH:   VALID block 7598 @ 0x468D6C00 is newer
FSFLASH: Mount block located @ 0x468D7800
FSFLASH:   VALID block 2 @ 0x468D7800 is newer
FSFLASH:   VALID block 8037 @ 0x468DB000 is newer
FSFLASH:   VALID block 19 @ 0x468DB800 is newer
FSFLASH:   VALID block 30367 @ 0x468DC800 is newer
FSFLASH:   VALID block 30342 @ 0x468DD000 is newer
FSFLASH:   CLEAN blocks     1924
FSFLASH:   MIN CLEAN blocks 512
FSFLASH:   BAD blocks       0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Stage 6.2 skipped
FSFLASH: Stage 7
FSFLASH: Stage 8
FSFLASH: Check done
FSFLASH: TOTAL number of blocks:  32768
FSFLASH: AVAILABLE blocks:        31596
FSFLASH: MAX logical block nbr:   31595
FSFLASH: COMMITTED blocks:         8943
FSFLASH: FREE blocks:             22653
FSFLASH: DIRTY blocks:            21870 (0 BAD)
FSFLASH: CLEAN blocks:             1902 (1902 NOR)
FSFLASH: HEADER blocks:              53
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 122560 bytes requested in total ****
FS: Mounting FAT file system partition / for read/write
FS:   SecPerClus = 2
FS:   BytesPerSec = 512
FS:   RootEntCnt = 512
FS:   NumFATs = 1
FS:   RsvdSecCnt = 1
FS:   Type: FAT16
FS:   AtFSX: 11.13
FS:   Block size: 1024
FS:   Read size: 1024
FS:   FAT mirroring: OFF
FS:   Sector locations
FS:     Size:               55675 (0xD97B)
FS:     PBR:                     1 (0x1)
FS:     FAT start:               2 (0x2)
FS:     Active FAT start:        2 (0x2)
FS:     Root start:            112 (0x70)
FS:     Clusters:            27766 (0x6C76)
FS:     Cluster start:         144 (0x90)
FS:     Cluster last:        55675 (0xD97B)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /
FS: FSCK level is 1
FSCK: Directory Check
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 131648 bytes requested in total ****
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 138592 bytes requested in total ****
FS: Partition / set to clean
FSCK: Done
FS: File System Size:           27766 (27766 Kb)
FS: Free Logical Blocks:        19799 (19799 Kb)
FS: Free Physical Blocks:       22652 (22652 Kb)
FS: Used Blocks:                 7967 (7967 Kb)
FS: Partition / mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 145984 bytes requested in total ****
FS: Mounting FAT file system partition /tpa/settings/ui/bgim/cache for read/write
FS:   SecPerClus = 2
FS:   BytesPerSec = 512
FS:   RootEntCnt = 512
FS:   NumFATs = 1
FS:   RsvdSecCnt = 1
FS:   Type: FAT12
FS:   AtFSX: 11.13
FS:   Block size: 1024
FS:   Read size: 1024
FS:   FAT mirroring: OFF
FS:   Sector locations
FS:     Size:                2199 (0x897)
FS:     PBR:                     1 (0x1)
FS:     FAT start:               2 (0x2)
FS:     Active FAT start:        2 (0x2)
FS:     Root start:              6 (0x6)
FS:     Clusters:             1081 (0x439)
FS:     Cluster start:          38 (0x26)
FS:     Cluster last:         2199 (0x897)
FS: File System Size:            1081 (1081 Kb)
FS: Free Logical Blocks:         1081 (1081 Kb)
FS: Free Physical Blocks:       22652 (22652 Kb)
FS: Used Blocks:                    0 (0 Kb)
FS: Partition /tpa/settings/ui/bgim/cache mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 165792 bytes requested in total ****
FS: Mounting FAT file system partition /ifs for read/write
FS:   SecPerClus = 2
FS:   BytesPerSec = 512
FS:   RootEntCnt = 512
FS:   NumFATs = 1
FS:   RsvdSecCnt = 1
FS:   Type: FAT12
FS:   AtFSX: 11.13
FS:   Block size: 1024
FS:   Read size: 1024
FS:   FAT mirroring: OFF
FS:   Sector locations
FS:     Size:                2799 (0xAEF)
FS:     PBR:                     1 (0x1)
FS:     FAT start:               2 (0x2)
FS:     Active FAT start:        2 (0x2)
FS:     Root start:              8 (0x8)
FS:     Clusters:             1380 (0x564)
FS:     Cluster start:          40 (0x28)
FS:     Cluster last:         2799 (0xAEF)
FS: File System Size:            1380 (1380 Kb)
FS: Free Logical Blocks:         1053 (1053 Kb)
FS: Free Physical Blocks:       22652 (22652 Kb)
FS: Used Blocks:                  327 (327 Kb)
FS: Partition /ifs mounted
MALL: **** NEW MAXIMUM HEAP 1 USAGE: 180416 bytes requested in total ****
FS: Mounting FAT file system partition /system for read/write
FS:   SecPerClus = 2
FS:   BytesPerSec = 512
FS:   RootEntCnt = 512
FS:   NumFATs = 1
FS:   RsvdSecCnt = 1
FS:   Type: FAT12
FS:   AtFSX: 11.13
FS:   Block size: 1024
FS:   Read size: 1024
FS:   FAT mirroring: OFF
FS:   Sector locations
FS:     Size:                2399 (0x95F)
FS:     PBR:                     1 (0x1)
FS:     FAT start:               2 (0x2)
FS:     Active FAT start:        2 (0x2)
FS:     Root start:              6 (0x6)
FS:     Clusters:             1181 (0x49D)
FS:     Cluster start:          38 (0x26)
FS:     Cluster last:         2399 (0x95F)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /system
FS: FSCK level is 1
FSCK: Directory Check
FS: Partition /system set to clean
FSCK: Done
FS: File System Size:            1181 (1181 Kb)
FS: Free Logical Blocks:          664 (664 Kb)
FS: Free Physical Blocks:       22652 (22652 Kb)
FS: Used Blocks:                  517 (517 Kb)
FS: Partition /system mounted
MALL: **** NEW MAXIMUM HEAP 0 USAGE: 96 bytes requested in total ****
BuildInfo: Label: <CRH109672_3_R9A009> Variant: <cxc4010129_E150_CU_PHONE> 
BuildInfo: Generated: 2006-10-20 19:22 by Off.Bld
Product  : <Sony Ericsson Z710> Version: 0000
HW Setup : Marika P2A (Id:0x9900) IRDA: B047 BT: C047 RS232: Error 
Vendor   : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000 
OS: core startup complete!
OS: Starting TimerProcess
OS: Vector 13 Pri 0 do not use DDA
OS: Vector 24 Pri 1 do not use DDA
OS: Vector 23 Pri 2 do not use DDA
OS: Vector 22 Pri 3 do not use DDA
OS: Vector 18 Pri 4 do not use DDA
OS: Vector 7 Pri 11 do not use DDA
OS: Vector 6 Pri 5 do not use DDA
OS: Vector 2 Pri 6 do not use DDA
OS: Vector 3 Pri 0 do not use DDA
OS: Vector 27 Pri 7 do not use DDA
OS: Vector 1 Pri 8 do not use DDA
OS: Vector 0 Pri 9 do not use DDA
OS: Vector 32 Pri 21 do not use DDA
OS: Vector 33 Pri 21 do not use DDA
OS: Vector 60 Pri 30 do not use DDA
OS: Vector 70 Pri 30 do not use DDA
OS: Vector 71 Pri 30 do not use DDA
OS: Vector 9 Pri 10 do not use DDA
OS: Vector 17 Pri 10 do not use DDA
OS: Vector 37 Pri 17 do not use DDA
OS: Vector 26 Pri 3 do not use DDA
MPH: PID 65634
RLC_DL: S I
RR: PID 65636
RR: RR_MM_PRIM 469955328 
RR: MM_RR_PRIM 469955968 
RR: MPH_RR_PRIM 469956608 
RR: RR_MPH_PRIM 469961088 
RR: DL_RR_PRIM 469964288 
RR: RR_DL_PRIM 469964928 
RR: RR_MMM_PRIM 469968768 
RR: MMM_RR_PRIM 469969408 
RR: RR_RLC_PRIM 469970688 
RR: RLC_RR_PRIM 469971328 
RR: PH_MPH_PRIM 470181248 
RR: MPH_PH_PRIM 470186688 
RR: MPH_CB_PRIM 469973568 
RR: CB_MPH_PRIM 469974208 
RR: MPH_MMM_PRIM 469976128 
RR: MMM_MPH_PRIM 469976768 
RR: PH_RLC_PRIM 470194688 
RR: RLC_PH_PRIM 470197888 
RR: RLC_LLC_PRIM 469981888 
RR: LLC_RLC_PRIM 469982528 
RR: RR_LLC_PRIM 469985088 
RR: LLC_RR_PRIM 469985728 
RR: PH_RR_PRIM 470200448 
RR: RR_PH_PRIM 470201088 
RR: RR_TIMER_PRIM 469996928 
RR: SIGID_INTERVAL_START_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996927 
RR: SIGID_INTERVAL_END_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996949 
RR: TEST_RR_TIMER_PRIM 1 
RR: MPH_TIMER_PRIM 469995008 
RR: T3206_VALUE: 800 ms
RR: T3208_VALUE: 960 ms
RR: T3210_VALUE: 300 ms
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 469981888
RLC: RLC_GMM_DATA_REQ = 469981889
RLC: RLC_DATA_REQ = 469981890
RLC: RLC_UNITDATA_REQ = 469981891
RLC: RLC_RLC_DATA_REQ = 469981893
RLC: RLC_RLC_UNITDATA_REQ = 469981894
RLC: RLC_DATA_RSP = 469981897
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 469982528
RLC: RLC_DATA_IND = 469982529
RLC: RLC_STATUS_IND = 469982530
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 469970688
RLC: RR_UPLINK_TBF_RELEASE_REQ = 469970690
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 469970691
RLC: RR_TBF_RELEASE_RSP = 469970692
RLC: RR_DOWNLINK_ACK_NACK_REQ = 469970693
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 469971328
RLC: RR_UPLINK_TBF_RELEASE_CNF = 469971330
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 469971331
RLC: RR_TBF_ESTABLISH_IND = 469971329
RLC: RR_TBF_RELEASE_IND = 469971332
RLC: RR_UPLINK_ACK_NACK_IND = 469971333
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 470194688

[beck]

RLC: PH_RLC_DATA_RELEASE_REQ = 470194690
RLC: PH_RLC_CONTROL_REQ = 470194691
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 470194693
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 470194694
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 470194695
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 470194696
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 470194697
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 470194698
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 470194699
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 470194700
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 470194701
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 470194702
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 470194703
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 470194704
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 470194705
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 470194706
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 470194707
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 470194708
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 470194709
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 470194710
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 470194711
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 470194712
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 470194713
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 470194714
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 470194715
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 470194716
RLC: PH_RLC_RELEASE_REQ = 470194717
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 470197888
RLC: PH_RLC_EGPRS_DATA_TYPE1_CNF = 470199172
RLC: PH_RLC_EGPRS_DATA_TYPE2_CNF = 470199173
RLC: PH_RLC_EGPRS_DATA_TYPE3_CNF = 470199174
RLC: PH_RLC_DATA_IND = 470197889
RLC: PH_RLC_EGPRS_DATA_RTS_IND = 470199171
RLC: PH_RLC_DATA_RTS_IND = 470197890
RLC: PH_RLC_DATA_RELEASE_CNF = 470197891
RLC: PH_RLC_CONNECT_IND = 470197892
RLC: PH_RLC_CONTROL_CNF = 470197893
RLC: PH_RLC_CONTROL_IND = 470197894
RLC: PH_RLC_RELEASE_CNF = 470197895
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 469987008
RLC: RLC_TIMER_T3166 = 469987009
RLC: RLC_TIMER_T3180 = 469987010
RLC: RLC_TIMER_T3182 = 469987011
RLC: RLC_TIMER_T3190 = 469987012
RLC: RLC_TIMER_T3192 = 469987015
RLC_UL: S I
MPH_Low: PID 65639
LLC 11: state 0
LLC 9: state 0
LLC 7: state 0
LLC 5: state 0
LLC 3: state 0
LLC: PID 65640
LLC: <SMS 469772354
LLC: >SMS 469772996
LLC: <SNDCP 469978688 469978696
LLC 1: state 0
Prototype start process started!
FSUSB: FS-USB Connection was initiated.
RLink: RLINK_PH
RLink: PH_RLINK_CONNECT_IND = 470178690
RLink: PH_RLINK_DISCONNECT_IND = 470178691
RLink: PH_RLINK_RTS_IND = 470178688
RLink: PH_RLINK_DATA_IND = 470178689
RLC: PH_RLINK
RLink: PH_RLINK_DATA_REQ = 470178048
RLink: RLINK_RLP
RLink: RLINK_RLP_EILD_HCITL.c: 613 EILD_HCITL_SetTXPin: PinLevel = 0 
IRPHY[SetPolarity] Mode=0
IRPHY[SetSignalPolarity] InvertRx: 1
RTS_IND = 469849344
RLink: RLINK_RLP_DATA_IND = 469849346
RLC: RLP_RLINK
RLink: RLINK_RLP_DATA_REQ = 469849347
RLink: RLINK_RLP_DTX_REQ = 469849348
RLC: RLINK_RR
RLC: RR_CHANNEL_MODE_INFO_IND = 314576640
RLC: RR_CHANNEL_MODE_MODIFY_IND = 314576641
RLink: State Idle
RH: Activate on LRRAT: G
RH state: Inactive
Rational Rose RealTime C Target Run Time SystemRelease 6.5.1233.0
Copyright (c) 1993-2005 Rational Software
RTS ERROR: Failed to allocate additional 896 byte as static memory, allocating as heap, 1091 32-bit needed (1025 configured)
RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1092 32-bit needed (1025 configured)
RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 1094 32-bit needed (1025 configured)
RTS ERROR: Failed to allocate additional 12 byte as static memory
EILD_LLRS232_Init. Original GPIO routing:
  RX : No
  TX : No
  CTS: No, Index=0
  RTS: No, Index=0
### Print Server: Requesting DebugMux channel...
,
621       ### Print Server: Started OK
A
W3
621        allocating as heap, 1097 32-bit needed (1025 configured)
621       RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 1099 32-bit needed (1025 configured)
621       RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1100 32-bit needed (1025 configured)
621       SM: Initiated; ProcessID = 65676 !
621       NS versions:
621       cnh1010128_rrtose          => CNH1010128_R6A007
622       cnh1010235-2_ns_cas        => CNH1010235_2_R6U002
622       cnh1010237_ns_was_if       => CNH1010237_R9AD003
622       cnh1010238_ns_was          => CNH1010238_R9AX008
622       cnh1010239_ns_wcdma_phy_if => CNH1010239_R10J
622       cnh1010278_rose_rt_codegen => CNH1010278_R4G005
622       cnh1601471_ns_gas_l23      => CNH1601471_R3L012
622       cnh160294-3_ns             => CNH160294_3_R4S001
622       cnh160552_applib_v42bis    => CNH160552_R2D
622       cnh160573_network_asi      => CNH160573_R6Y001
622       cnh160634_ns_swbp          => CNH160634_R9J
622       cnh160654_ns_gas_sndcp     => CNH160654_R4F(
622       cnh160655_ns_cas_ntcsd     => CNH160655_R5K
622       cnh160884_ns_rrt_top_model => CNH160884_R7N002
622       MM: reset TMSI
622       MM: No valid GSM keys
622       MM: No valid WCDMA keys
622       MM: state 0SEMC_ACB: Process started, pid 0x100e4.
622       SEMC_ACB: Version = ACBM V3.12, debuglevel = 0x1131 [GLD] GRAM Bank 1: 20400000 - 20800000
622        [GLD] GRAM Bank 2: 20800000 - 20C00000
622        [GLD] GRAM Bank 3 (noncached): 20C00000 - 21000000
622        [GLD] g_rgdwMemoryXRAM = (20E80000 - 20FFFFFF)GMM: ResetSIM_Data
622       GMM: No valid GSM-GPRS keys
622       GMM: No valid WCDMA keys
622       LLC 1: Unexpected signal #469983810* CC4 state 0
622       * CC3 state 0
622       * CC2 state 0
622       * CC1 state 0
622       DRM: DRM_Process started
622       * CC5 state 0
622       * CC6 state 0
622       * CC7 state 0
624        TVP Server: Registration request from Client, nr=3, PID=65610 
624        TVP Server: Registration request from Client, nr=4, PID=65612 
624       CCS: IdleSS: State Idle @CallMeter startedSMC_MO_1 (65667) state 4
624       SMC_MO_2 (65668) state 4
624       SMC_MT (65669) state 4
624       SMR_MO state 3
624       SMR_MT state 3
624       FSUSB: USB Mass Storage process started, pid = 0x100E7.
624       FSUSB: FAT Snooping is Disabled.[ICC-LD] ICC_Reader_0_Process Started
624       [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0[SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0M: MODULE_INIT
625        [GVI] GVI_CallQueue_PrepareCall called before GVI is ready, retry...GDFS_SRV State 1-Closed
627       GDFS: Format version 1
628       GDFS Log[5] <- Phys[0]  84335 bytes left. Erased     2 times
629       GDFS Log[1] <- Phys[1] 123138 bytes left. Erased     1 times
630       GDFS Log[2] <- Phys[2] 107060 bytes left. Erased     4 times
633       GDFS Log[4] <- Phys[3]  13851 bytes left. Erased     2 times
635       GDFS Log[0] <- Phys[4] 100183 bytes left. Erased     4 times
637       GDFS Log[6] <- Phys[6] 131060 bytes left. Erased     1 times
639       GDFS Log[3] <- Phys[7]  12261 bytes left. Erased     2 times
641       GDFS_SRV State 2-Opening
641       MPH: GSM Search Intervals 1 10 40 10 35 - 40 0 0 0 0
641       CC: speech ver config 4 2 0 5 1 BT Dispatch signal base: 90180096 (0x5600a00)
641        BT Request signal base:  15850 (0x3dea)
641        BT Response signal base: 16005 (0x3e85)
641        BT Module Internal base: 678 (0x2a6)
641        BT_UART_ON_TIMER:        685 (0x2ad)
641        EVENT_BT_EBT_STACK:      710 (0x2c6)
641        BT Signal Interval end:  982 (0x3d6)
641        BT_Ctrl_                   process Id = 0x100ad 
641        EBT_StackProcess_          process Id = 0x100ae 
641        EILD_HCITL_Driver_Process_ process Id = 0x100b9 
641       BT/EBT_sil.c: 380 SIL_OpenConnection: COM1:baud=115200 parity=N data=8 stop=1 
641       RR state 0
642       CC: TTY mode = 0
642       * CC0 state 0
642       *********** FINAL FLASH DATE: 20061101 ************
642       CNH160637 Flip: Opened!
642       MPH: PacketChannels activated 
642       MS_TYPE = MS_EGSM900_DCS1800_GSM850_PCS1900
642       MPH:SelectedModeIndex=1
642       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM900_OR_EGSM900] = -107
642       MPH_GD_Info.SensitivityLimit_dBm[BAND_DCS1800] = -107
642       MPH_GD_Info.SensitivityLimit_dBm[BAND_PCS1900] = -107
642       MPH_GD_Info.SensitivityLimit_dBm[BAND_GSM850] = -107
642       MPH_GD_Info.MinNrOfIdentifiedCellsToSkipWeakCells = 0
642       MPH: EGSM900_DCS1800
642        Read EDGE Platform Specific GDFS: 
642        EDGE AGC Enabled 
642       HW_FG: Dis Bl
643       MPH NullState
643       ENH_Control_Reset: IsPkt 0 IsARFCNsInit 0
643       ENH_Control_Reset: IsPkt 1 IsARFCNsInit 0
643       ENH_NCParameters_Reset GSM
643       ENH_NCParameters_Reset GPRS
643       ENH_NCParameters_Reset GSM
643       ENH_NCParameters_Reset GPRS
643       TCH_FACCH_BASED_AFC onEILD_HCITL.c: 613 EILD_HCITL_SetTXPin: PinLevel = 1 
643       EILD_HCITL.c: 867 SetBaudRate: = 115200, Stopbits = 1 
643       LLRS232/LLDEBUG : Unexpected signal 5197 from pid 100ab
643       XX: Active MS operation mode: MS_MODE_CS_AND_PS
645       CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
645       HW_FG: Dis Bl
645       CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
645       HW_FG: Dis Bl
645       CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
645       HW_FG: Dis Bl
645       CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
646       GMM<-GMM_EXTREGISTRATIONINFO_SET_REQRLP: process started
646       L2RCOP: process started
646       L2RCOP: state changed to 'Initial'
646       [sysctrl] ON-button pressed
646       [sysctrl] Enabling UICC refresh task.
646       [SIM_FILE_UTIL] FCP Cache Size 80
646       SL: SearchingMode = 1
646       SL: RGD GSM_MultislotClass=2
646       [ICC-PD] RD(270) WR(270) VR(1..2) T1(0) D8(1) D16(1) D32(0) D64(0) RM(0) CS(0)
646       SL: RGD GPRS_MultislotClass=10
646       SL: RGD EGPRS_MultislotClass=10
646       SL: RGD DTM_GPRS_multislotClass=2
646       SL: RGD DTM_EGPRS_multislotClass=2
646       ns_util: MS Features:2b915
646       ns_util: CFG_ENABLE_GSM_GPRS_CALL_SUPPORT
646       SL: RAT_Mode = GSM single mode
646       SL: SIGID_INTERVAL_START_MOD_NS_CAS = 469762048
646       SL: ProcessID = 1007d
646       SL: CFG_DISABLE_SECURITY_HANDLING is NOT! defined
646       SL: DUAL_RAT_SUPPORT is NOT! defined
646       SL state 0
646       SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100c8
646       SL: Not active
646       SL new SIM handle=0
646       SL<-R_REQ_NSAD_SERVICEMODE_GET in State 0 from 10057
646       SL: Not active
647       ETX OK
647       ETX OK
648       MMM IMEI = 353065-01-155530-0, IMEI_SVN=20
648       DebugMux[IMEI] Length=8, TypeOfID=2, OddEven=1, Digits: 3 5 3 0 6 5 0 1 1
649       MMM EqPLMN List read from GDFS, nbr=1, 250 1 
649       MMM state 0
649       MMM MS_OperationMode=0
649       GD_RXIF_DigRSSI_Compensation 0x0are ucMacAddr: 2041499c   iMacAddr: 0 
649       are ucMacAddr: 2041499c   iMacAddr: 1 
675       EILD_HCITL.c: 867 SetBaudRate: = 115200, Stopbits = 1 
676       [lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
676       [ICC-PD] Fi: 1 Di: 1MALL: **** NEW MAXIMUM HEAP 0 USAGE: 896 bytes requested in total ****Load Module Starter: Hunt for Program Manager failed
677       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 960 bytes requested in total ****
678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 4992 bytes requested in total ****
678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 9216 bytes requested in total ****
678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 13440 bytes requested in total ****
678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 68992 bytes requested in total ****
678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 73120 bytes requested in total ****

[beck]

678       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 82368 bytes requested in total ****ACM: Starting Application Side.
678       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 190848 bytes requested in total ****
682       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 88352 bytes requested in total ****
683       [ICC-PD] WARNING - Character Timeout waiting for receive
685       FS: Partition /ifs set to dirtyACM.StartMain: Starting First App. id=1...
687       ose_efmi_get_config status 0x00000000, value 360
688       Concorde ID Word = 0x39
690       Concorde
690       Reg: 6  Value 106
690       Reg: 15  Value 14f
690       Reg: 16  Value 10
690       Reg: 17  Value 11
690       Reg: 22  Value 596
690       Reg: 31  Value 15f
690       Reg: 41  Value 669
690       Reg: 48  Value 30
690       Reg: 49  Value 131
690       Reg: 50  Value 732
690       Reg: 54  Value 436
690       Reg: 1  Value 401
690       Page 1 Reg: 3  Value 43
704       
### WARNING! PRINT SERVER OVERFLOW, 234 PRINTOUT(S) LOST! ###
712       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 201248 bytes requested in total ****
739       ## DSP VersionIdentity: "CRH109469_R10N MIDI_PCM_ASR --- EULRMAL_R10_DSP Tue Oct  3 14:16:24 2006"
739       AUC INFO: Starting PostBoot. Takes a while in MoseS (5 sek)
775        [GVI] DisplayDriver Installed:SID19111 Ver:200605310 WxH=176x220
775       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 97824 bytes requested in total ****
776        [GVI] DisplayDriver Installed:UC1617 Ver:200604250 WxH=128x128
778       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 229344 bytes requested in total ****
779       MALL: **** NEW MAXIMUM HEAP 0 USAGE: 492224 bytes requested in total ****
780       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 211808 bytes requested in total ****
782       [GVI] Server Ready, started in 0.793621 s
845       SPBC Process started
845       CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
845       CBS: cbs_main.c: SIM STATE 0, process 0MMPROT[SIP]: SIP started
848       GDFS_WR State 1-Closed
848       GDFS_WR Start check
859        RTC: Reset of Calendar registers. Invalid data
859       DRM: Init OK
859       DRM: GetAgentType(, 0) Couldn't match FileExtension
859       DRM_PRS: DRM_PRS_Process started
879       HW_FG: En Bl
879       CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
882       FS: Partition /system set to dirtyBT/EBT_sil.c: 399 SIL_OpenConnection: Start event OK! 
894       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 222400 bytes requested in total ****
905       FS: Partition / set to dirty
905       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 233536 bytes requested in total ****
909       FSX: Unable to create mem stick directory structure - continuing anyway!GDFS_Wrapper: **** Up and running ****
914       MALL: **** NEW MAXIMUM HEAP 1 USAGE: 245280 bytes requested in total ****
919       BATT: Battery type is TYPE 2
920       BATT: Compensated VBAT (4025 mV) based remaining capacity is 84.0%
954       GDFS Free Blk 5 Ok
954       GDFS_WR Check done
954       GDFS_SRV State 3-Open
954       GDFS_WR State 2-Open*** PID started 65621. ***
972       *** Test code: .... disabled. ***
972       *** Runtime checks: disabled. ***
972       *** Fatal errors: . enabled. ***
972       *** Debug traces: . disabled. ***
972       SM: Received REQUEST_PS_PERIODICREPORT_ENABLE
973       SNDCP: SNDCP_PERIODIC_REPORT_ENABLE_IND
973       SL<-304087087 in State 0 from 10050
973       SL: Not activeBT/BT.c: BT_RECEIVE_W_TMO: Timeout after 500 ms 
1019      EILD_HCITL.c: 1729 UART ClockRequest: ON 
1019      BT/EBT_sil.c: [Tx] HCI_Reset: 
1019      EILD_HCITL.c: 1847 PowerManagement: Wake-up from sleep mode: 
1021      EILD_HCITL.c: 1460 R_Do_Send: 
1021      20347DC8 ....             01 03 0C 00                                     
1043      EILD_HCITL.c: 1558 Done_Receive: 
1043      203435CA .......          04 0E 04 02 03 0C 00                            
1043      BT/EBT_sil.c: [Rx] HCI_Command_Complete_Event:  
1043      BT/BT.c: 6329 HCI_CONFIGURE_PORT_CNF: 
1044      BT/BT.c: 6318 HCI_START_CNF: 
1262      [ICC-PD] WARNING - Character Timeout waiting for receive
1262      [ICC-PD] Fi: 1 Di: 1
1268      [ICC-PD] WARNING - Character Timeout waiting for receiveThe CheckIfMoreResets procedure has been activated.
1280      State = 30, NrOfTriesOfReset = 2. 
1292      [SIM] *** ERROR *** No Card Present
1292      [SIM] InitialiseCard SIM_APPLICATION_UNKNOWN
1292      [SIM] WARNING - Destruction of Application Parameters
1292      [SIM_FILE_UTIL] Used Cache Records 0
1292      [SIM_FILE_UTIL] Max Cache Records  80
1292      [SIM] WARNING - Destruction of Card Parameters
1292      [SIM] State Changed: SIM_STATE_POWER_OFF, Appl: 0, Ref: 0[lockctrl] SimLock : NOT OK, PhoneLock : NOT OK, Sim Active : NOT ACTIVE
1292      SL<-EVENT_SIM_STATE_CHANGED in State 0 from 100c8
1292      SL: Not active
1292      SL new SIM handle=0AT/ AT-3; Received Sig:'EVENT_SIM_STATE_CHANGED'(216018176) from:'UICC_Master_Process', executing SIM_OnEvent_SIM_StatusChanged()
1293      CBS: cbs_main.c: EVENT_SIM_STATE_CHANGED accepted
1293      CBS: cbs_main.c: SIM STATE 7, process 0
1293      SPBC <- SIM_STATE_POWER_OFFBT/BT.c: 1317 HostController_Init: Configured for "STLC2500x" 
1294      BT/BT.c: 1876 DirName = "/ifs/corrections" 
1296      FS: Partition / set to clean
1296      FS: Partition /ifs set to clean
1296      FS: Partition /system set to cleanBT/BT.c: 2048 ST Microelectronics: BT2.0+EDR, LM_Version = R5A 
 STLC2500 R4.2 12102005 12:40:14 ZAV100012 
HW Id= V440BAA 
1300      BT/BT.c: 2068 CHIP_ID = 0x00000000, HCI_Revision = 0x0402, BT_LMP_Subversion  = 0x0520
1316      BT/BT.c: 2303 Download: STLC2500_R4_02_A3_E15.ptc, Size = 8416 
1319      FS: Partition /ifs set to dirty
1319      FS: Partition /ifs set to clean[sysctrl] Controlled initialization of processes complete
1490      WAP:Start (process id 0x1009D)
1490      IrDA_ll.c:: IrLAP Nickname: Sony Ericss 
1490      IrDA_lap_rec.c: IrLAP process ready ! 
1490      IrDA_lmp_rec.c: IrLMP process ready ! 
1490        IrDA Request signal base:  98566208 (0x5e00040)
1490        IrDA Response signal base: 98567744 (0x5e00640)
1490        IrDA Event signal base:    98569344 (0x5e00c80)
1490        IrDA Module Internal start: 98571584 (0x5e01540)
1490        IRLAP_CONNECT_IND:          98571648 (0x5e01580)
1490        LM_CONNECT_REQ:             98573696 (0x5e01d80)
1490        IrDA Module Internal end:   98575616 (0x5e02500)
1490        IrLAP_                      process Id = 0x100af
1490        IrLMP_                      process Id = 0x100b0
1490        EILD_LLIrDA_Driver_Process_ process Id = 0x100ba 
1491      WAP: File API Initiated
1491      WAP: fileMkDir(.../msm)
1492      WAP: created task 0
1493      WAP: fileMkDir(.../stk)
1493      WAP: fileMkDir(.../stk/tmp)
1495      WAP: created task 1
1496      WAP: createTask failure for 2
1498      GDFS_Wrapper: GDFSW_RestoreFromFile called.
1499      AT/ AT-3; Received Sig:'RESPONSE_RS232_GETCAPABILITIES'(67109888) from:'RS232_Process', executing CEI_OnRS232_GetCapabilities()
1499      AT/CEI_OnRS232_GetCapabilities: Warning !! The channel already destroyed, execution stopped: ClientTag = d!  
1500      MSG: msgmain.c: State 255 changed to state 0
1500      PBS Process started. Cache all records. Table Version 16.
1500      PBS SIM Support1: 0111111111
1500      PBS SIM Support2: 1111111001
1500      PBS SIM Support3: 1111110111
1500      PBS SIM Support4: 1111111001
1500      PBS: Dispatch PHB_NO_ACCESSBT/BT.c: 2303 Download: STLC2500_R4_02_05_SEMC_00.ssf, Size = 277 
1553      BT/BT.c: 2175 Data missing in GDFS ?!, DS_FileSize = 0, ==> skip download 
1553      BT/BT.c: 2196 Failed to download GD_BT_Dynamic_Settings_File 
1562      GDFS_SRV Queue full
1570      MSG: msgmain.c: State 0 changed to state 1
1570      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1570      MSG: msgmain.c: SIM_STATE NOT Active
1570      MSG: msgmain.c: EVENT_SIM_STATE_CHANGED accepted
1570      MSG: msgmain.c: SIM_STATE NOT Active
1612      GDFS_SRV Queue empty
1664      GDFS_SRV Queue full
1749      GDFS_SRV Queue empty
1817      GDFS_SRV Queue full
1840      GDFS_SRV Queue emptyGDFS_Wrapper: GDFSW_RestoreFromFile finished:ERRORS were found!!!
1841      GDFS_SRV Queue full
1851      @NWS: RadioStartMode: 0
1854      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 516928 bytes requested in total ****
1864      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 555264 bytes requested in total ****
1868      [CLH] Server starting.
1868      [CLH] OPA: IRadioControl_GetStatus = 0
1868      SL<-304087087 in State 0 from 100f4
1868      SL: Not active
1869      [SIMUTIL] InitialiseSimManagerData SIM not present.
1869      [CLH] Server started OK.
1871      @NWS: Activating radio.
1871      SL<-R_REQ_NSAD_SERVICEMODE_SET in State 0 from 10057
1871      SL: Not active
1871      SL<-R_REQ_NSAD_ACTIVATE in State 0 from 10057
1871      MM: state 12
1871      MMM RH_ACTIVATE_REQ, PLMN = 250 1, SwitchRAT=0, RAT_Mode=1
1871      RR: MPH_ACTIVATE_REQ, 250, 1
1871      RR state 1
1871       RR_NO_CELL_AVAILABLE_IND, Cause = 4
1871       RR_NO_CELL_AVAILABLE_IND, Cause = 4
1871      RLC_UL: S S C Lost
1871      RH state: GSM Active
1871      MMM IMEI = 353065-01-155530-0, IMEI_SVN=20
1871      MMM state 12
1871      GMM<-GMM_ATTACH_REQ
1871      GMM<-GMM_NO_SERVICE_AVAILABLE_IND
1871      GMM<-GMM_NO_SERVICE_AVAILABLE_IND
1871      SL state 1
1871      SL<-MMM_RAT_CHANGE_IND in State 1 from 10072
1871      SL: Dispatched RAT = 0
1871      SL<-R_REQ_NSAD_SERVICEMODE_GET in State 1 from 10057
1872      SL<-R_REQ_NSAD_SERVICEMODE_SET in State 1 from 10057
1872      [CLH] Error OPA_UE_SERVICE_INT_EXIST reported from line 2168 in 'clh_server_icbhandler.c'.
1872      [CLH] Error OPA_UE_SERVICE_INT_EXIST reported from line 2171 in 'clh_server_icbhandler.c'.
1872      [CLH] Error OPA_UE_SERVICE_INT_EXIST reported from line 7142 in 'CClhServer_imp.c'.
1873      
sU
GD>00180018
GD>00060006
GD>000A000A
GD>06370000
GD>06370000
GD>06370000
GD>06370000
1873      GD>1800
GD>0E10
CC>0001
L[
]
DR0
DRY
s
1873      FS: Partition /system set to dirty
1874       SMS STORAGE: Storage media 0: State changed (0 -> 1)
1875      SL<-REQUEST_ROAMING_CURRENTPLMN_STATUS_GET in State 1 from 10104
1875       SMS BEARER: Not available (CS = 0, PS = 0)
1880      MPH: DRX period: 1410 ms (235 x 6)
1880      MPH CellSelection
1880      MPH Take new rxlev measurements
1881      FS: Partition / set to dirty
1884      SL<-REQUEST_ROAMING_CURRENTPLMN_STATUS_GET in State 1 from 10107
1891      SL<-REQUEST_ROAMING_CURRENTPLMN_STATUS_GET in State 1 from 1010c
1893      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 583232 bytes requested in total ****
1895      Temp: 24, 3
1898      CSATSERVICES_IMP:  OnStart()!
1899      CSATSERVICES_IMP:  SAT Services starting NOT OKAY!
1899      CoreDebug: process up and running.
1899      CRD: CrashSms_DumpHasOccured magic_pattern_check_data = 0x3D91B510
1899      Core_Debug_Process: NO DUMP
1899      CoreDebug: Crash SMS not activated
1899      ESD: process up and running.
1906      MALL: **** NEW MAXIMUM HEAP 1 USAGE: 258560 bytes requested in total ****AT/ AT-3; Received Sig:'REQUEST_AT_GET_STATE_OF_ACTIVE_CHANNELS'(65011904) from:'@AT_COMMAND_SERVER', executing CFS_OnRequest_AT_GetStateOfActiveChannels()
1972      MALL: **** NEW MAXIMUM HEAP 1 USAGE: 272352 bytes requested in total ****
1974      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 612544 bytes requested in total ****
1982      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 653088 bytes requested in total ****
1984      Disp_CreateFont: Creating font 0
1986      Disp_CreateFont: Creating font 1
1987      Disp_CreateFont: Creating font 12
1989      Disp_CreateFont: Creating font 13
1990      Disp_CreateFont: Creating font 17
1992      Disp_CreateFont: Creating font 18
1993      Disp_CreateFont: Creating font 19
1995      Disp_CreateFont: Creating font 20
1996      Disp_CreateFont: Creating font 24
1997      Disp_CreateFont: Creating font 25
1999      Disp_CreateFont: Creating font 26
2000      Disp_CreateFont: Creating font 27
2001      Disp_CreateFont: Creating font 43
2003      Disp_CreateFont: Creating font 44
2004      Disp_CreateFont: Creating font 45
2006      Disp_CreateFont: Creating font 46
2007      Disp_CreateFont: Creating font 54
2008      Disp_CreateFont: Creating font 64
2010      Disp_CreateFont: Creating font 72
2010      Disp_CreateFont: Creating font 71
2010      Disp_CreateFont: Creating font 84
2011      Disp_CreateFont: Creating font 85
2013      Disp_CreateFont: Creating font 87
2015      Disp_CreateFont: Creating font 88
2016      Disp_CreateFont: Creating font 93
2018      ***** Investigating Language Availability *****
2019      ENG: FS =     Available, ROM =     Available
2019      RUS: FS =     Available, ROM =   Unavailable
2019      ***********************************************
2021      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 707072 bytes requested in total ****
2021      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2023      I2C1 SW IRQ issued
2054      EILD_HCITL.c: 867 SetBaudRate: = 921600, Stopbits = 1 
2070      GDI_TEXT: Severe error at line 6516
2074      CBS: cbs_main.c: EVENT_NSAD_SERVICEMODE_CHANGED accepted
2074      CBS: cbs_main.c: EVENT_RADIOCTRL_STATUS_CHANGED accepted
2074      CBS: cbs_main.c: RadioControlStatusChanged, RadioControlRadioOn = 0, NSAD_ServiceModeFull = 0
2075      CBS: cbs_main.c: EVENT_RADIOCTRL_STATUS_CHANGED accepted
2075      SL<-R_REQ_NSAD_SERVICEMODE_GET in State 1 from 100e1
2075      CBS: cbs_main.c: RadioControlStatusChanged, RadioControlRadioOn = 1, NSAD_ServiceModeFull = 1
2075      CBS: cbs_main.c: EVENT_NSAD_SERVICEMODE_CHANGED accepted
2075      MSG: msgmain.c: REQUEST_MSG_FIND rejected
2077      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 742816 bytes requested in total ****
2079       SMS STORAGE: Storage media 0: State changed (1 -> 2)
2081       SMS STORAGE: Storage media 0: State changed (2 -> 3)
2081       SMS STORAGE: Storage media 0: State changed (3 -> 4)
2081       SMS STORAGE: Storage media 0: State changed (4 -> 5)
2081       SMS STORAGE: Storage media 1: State changed (0 -> 1)
2090      SL<-REQUEST_NWS_RXSIGNALPARAMS_GET in State 1 from 10117

[beck]

2093      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 808704 bytes requested in total ****
2107       SMS STORAGE: Storage media 1: State changed (1 -> 2)
2109       SMS STORAGE: Storage media 1: State changed (2 -> 3)
2109       SMS STORAGE: Storage media 1: State changed (3 -> 4)
2109       SMS STORAGE: Storage media 1: State changed (4 -> 5)
2148      I2C1 SW IRQ issued
2171      CMZ Log: 
DDM started in mode 0xf2:
2176      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 849184 bytes requested in total ****
2180      CMZ Log: ReadyBT/HCI.c: 1035 ST_Set_UART_Baud_Rate: Status = 0x00 
2190      EILD_HCITL.c: 1664 R_Do_SetPowerOffTime: 500 ms 
2192      MALL: **** NEW MAXIMUM HEAP 1 USAGE: 286144 bytes requested in total ****
2195      CMZ Log: 
DDM started in mode 0xf2:
2196      MALL: **** NEW MAXIMUM HEAP 1 USAGE: 300480 bytes requested in total ****
2198      CMZ Log: Ready
2208      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2208      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2208      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2208      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2209      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2209      Handle_Shell_Timeout: Time-out from non-existent timer: 60078ef8 - Ignored.
2224      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2226      [SIMUTIL] Error OPA_UE_RESOURCE_EXIST reported from line 123 in 'CSimUtilityManager_imp.c'.
2227      [StandbyBook#87] Created
2228      [SIMUTIL] InitialiseSimManagerData SIM not present.
2229      [StandbyBook#87] Create gui [StatusIndication#4] on main display
2229      [Window#1.1 "Standby"] Got focus on main display
2230      [StandbyBook#87] Create gui [StatusIndication#5] on second display
2230      [Window#1.2 "Standby"] Got focus on second display
2231      [StandbyBook#87] Create gui [MainInput#6] on main display
2258      [StandbyBook#87] Goto StandbyBook_StandbyPage
2258      [InitBook#88] Created
2258      [InitBook#88] Goto InitBook_StartUp_Page
2259      [SIMUTIL] InitialiseSimManagerData SIM not present.
2259      ***** Auto language at startup, getting preferred value (4)
2273      I2C1 SW IRQ issued
2275      CMZ Log: 
DDM started in mode 0xf2:
2277      GDI_TEXT: Severe error at line 6516
2292      CMZ Log: Ready
2297      [InitBook#88] Goto InitBook_Customization_Page
2312      MPH Get FCH 21 Rxlev -103
2319      GDFS_SRV Queue empty
2329      MPH Get FCH 21 InitialFrequencyAdjustment_State 1
2335      [InitBook#88] Create gui [Feedback#7] on main display
2335      [Window#1.1 "Standby"] Lost focus on main display
2336      [Window#2.1 "InitBook"] Got focus on main display
2337      HW_FG: En Bl
2337      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2339      
      *** UI Performance warning! ***
2339      Action function in [InitBook#88] triggered by Event#2104 <UI_INITIATING_CUSTOMIZATION_EVENT>
2339      Time to execute: (168 ms)
2341      CMZ Log: 
DDM started in mode 0xf2:
2343      *********
2343      [Application session list]
2343        [Session#1 "Standby"] (W1, W2) Books: 1 - [StandbyBook#87]
2343        [Session#2 "InitBook"] (W1) Books: 1 - [InitBook#88]
2343      *********
2343      *********
2343      [Session window list <MAIN>]
2343        [Window#1.1 "Standby"] GuiObjects: 2 - [StatusIndication#4](invis) [MainInput#6](invis)
2343        [Window#2.1 "InitBook"](F) GuiObjects: 1 - [Feedback#7](F)
2343      ***
2343      [Session window list <SECOND>]
2343        [Window#1.2 "Standby"](F) GuiObjects: 1 - [StatusIndication#5](invis)
2343      *********
2346      MPH Get FCH 21 InitialFrequencyAdjustment_State 2
2348      CMZ Log: Ready
2358      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 896480 bytes requested in total ****
2363      MPH Get FCH 21 InitialFrequencyAdjustment_State 3
2378      MALL: **** NEW MAXIMUM HEAP 1 USAGE: 315616 bytes requested in total ****
2381      MPH Get FCH 21 InitialFrequencyAdjustment_State 4
2384      CMZ Log: 
DDM started in mode 0xf2:
2389      CMZ Log: Ready
2398      I2C1 SW IRQ issued
2398      MPH F 21 Not OK
2398      MPH Get FCH 116 Rxlev -105
2401      HW_FG: En Bl
2401      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2411      MPH Get FCH 116 InitialFrequencyAdjustment_State 1
2413      CMZ Log: 
DDM started in mode 0xf2:
2417      CMZ Log: Ready
2422      MPH Get FCH 116 InitialFrequencyAdjustment_State 2
2434      MPH Get FCH 116 InitialFrequencyAdjustment_State 3
2446      MPH Get FCH 116 InitialFrequencyAdjustment_State 4
2447      CMZ Log: 
DDM started in mode 0xf2:
2458      MPH F 116
2468      CMZ Log: Ready
2469      HW_FG: En Bl
2469      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2470      HW_FG: En Bl
2470      CNH160637 Flip: LD_USERIO_FlipGetStatus: flip is OPEN
2488      CMZ Log: 
DDM started in mode 0xf2:
2494      CMZ Log: Ready
2511      CMZ Log: 
DDM started in mode 0xf2:
2516      CMZ Log: Ready
2523      I2C1 SW IRQ issued
2551      
xE2
2557      CMZ Log: 
DDM started in mode 0xf2:
2561      CMZ Log: Ready
2586      [SIMUTIL] InitialiseSimManagerData SIM not present.
2591      CMZ Log: 
DDM started in mode 0xf2:
2596      CMZ Log: Ready
2609      
xE2
2609      MPH Get SCH 116
2614      CMZ Log: 
DDM started in mode 0xf2:
2620      CMZ Log: Ready
2643      CMZ Log: 
DDM started in mode 0xf2:
2648      I2C1 SW IRQ issued
2648      CMZ Content Revision: R1GB001
2671      MPH S 116  -1 15
2671      MPH Get BCCH 116
2688      MPH B 116  0 0 0 0 SI4
2688      MPH Get FCH 19 Rxlev -106
2705      MPH F 19 Not OK
2705      MPH Get FCH 20 Rxlev -106
2722      MPH F 20 Not OK
2722      MPH Get FCH 37 Rxlev -106
2740      MPH F 37 Not OK
2740      MPH Get FCH 120 Rxlev -106
2748      MPH F 120
2748      MPH Get SCH 120
2773      I2C1 SW IRQ issued
2791      FS: Partition / set to clean
2793      FS: Partition /system set to clean
2807      MPH S 120  -2 14
2807      MPH Get BCCH 120
2824      FS: Partition / set to dirty
2834      FS: Partition /system set to dirty
2848      MPH B 120  0 0 0 0 not OK
2848      MPH FrequencyAdjustment
2855      
RF68
CFD0
run
s[
]
DRY
2864      REQUEST_NOTES_MASTERRESET but Notes server not locked!
2864      GDFS_SRV NoWrites 500 Max Queue 2178
2865      HPB: InitContactPbag
2868      HPB: InitGroupPbag
2869      GDFS_SRV Queue full
2898      I2C1 SW IRQ issued
2907      MALL: **** NEW MAXIMUM HEAP 0 USAGE: 945536 bytes requested in total ****
2920      GDFS_SRV Queue empty
2969      Handle_Shell_Timeout: Time-out from non-existent timer: 6007ba38 - Ignored.
3023      I2C1 SW IRQ issued
3100      MPH FrequencyErrorCounter 40
3105      MPH Frequency error 3 TCXO 1086
3105      MPH CellSelected
3105      MPH_MCC = 250
3105      ENH_NCParameters_Reset GPRS
3105      ENH_Control_Reset: IsPkt 1 IsARFCNsInit 1
3105      ServingCell.GNCL_IsValid = FALSE
3105      MPH ServingCellInfo: 
3105        PLMN 250 2 
3105        LAC 0x3eb
3105        BSIC 15
3105        ARFCN 116
3105        Id 0
3105        BA 0
3105        T1 -1774 I51 8 T3 -25 QB 1232
3105        P 0 0 0
3105        S -106 5
3105        R 0 0 0 0
3105        CRH  6
3105        EI 0
3105        NP 0
3105        CC 0
3105        BABR 0
3105        BPM 0
3105        PWRC 0
3105        DTX 0
3105        TO 0
3105        2TER 0
3105        2quater -
3105        ECSC 0
3105      MPH: SI2t NO_INFO  SI2q NOT_READY -> NOT_READY
3105      RR state 2
3118      Handle_Shell_Timeout: Time-out from non-existent timer: 60083d98 - Ignored.
3118      Handle_Shell_Timeout: Time-out from non-existent timer: 60083d98 - Ignored.
3118      Handle_Shell_Timeout: Time-out from non-existent timer: 60083d98 - Ignored.
3118      Handle_Shell_Timeout: Time-out from non-existent timer: 60083d98 - Ignored.
3119      Handle_Shell_Timeout: Time-out from non-existent timer: 60083d98 - Ignored.
3119      MPH: SCH 116 req
3145      Temp: 25, 3
3148      I2C1 SW IRQ issued
3178      MPH: Serving ARFCN 116 BCCH wanted 67 known 0
3178      MPH: requestBCCH Norm TC 1, ARFCN 116, SI flag 2
3186      
slp
SLP
HA
3189      MPH S 116  0 15
3237      MPH: requestBCCH Norm TC 2, ARFCN 116, SI flag 20
3273      I2C1 SW IRQ issued
3276      MPH B 116  0 0 0 0  26 1
3276      si2:59061a108ac80a400800000000000000042004ff700000
3276      MPH UpdateCDT, cause 1
3276      New CDT: 3 14 19 84 95 98 100 108 111 112 114 116 120
3277      
3296      MPH: Serving ARFCN 116 BCCH wanted 61 known 2
3296      MPH: requestBCCH Norm TC 3, ARFCN 116, SI flag 40
3335      MPH B 116  0 0 0 0  27 2
3335      si3:49061b797452f02003ebc800774265457000001c2b2b2b
3335      MPH: DRX period: 470 ms (235 x 2)
3335      MPH: SI2t NO_INFO  SI2q NO_INFO -> UNCHANGED
3355      MPH: Serving ARFCN 116 BCCH wanted 249 known a2
3355      MPH: requestBCCH Norm TC 4, ARFCN 116, SI flag 200
3394      MPH B 116  0 0 0 0  28 3
3394      si4:41061c52f02003eb65457000006451e074012b2b2b2b2b

[the_laser]

по логу софт телефона работает на 100%. следовательно, это железо, как и предполагалось

[beck]

Спасибо.

[gelak]

тело прошивается логи снимают но не вкл
P.S. в криворукости не замечен !!!
вот что пишет==>
ldr_on_ldr hdr no ack,err:10

[Alva]

запомни, вот такая строчка "ldr_on_ldr hdr no ack,err:10" означает, что дело не в софте, а в железе--как правило, помогает, прогрев флэшки, хотя многие ленятся ковыряться в компаунде

[Alva]

и вообще, я теперь сначала шью без комплита. Если аппарат включился, через тестовое меню основные функции проверены, тогда делаю комплит

[шпп]

Тоже самое, шил разными версиями, грел, подымал флэшь результата ноль
всё осталось без изменений. на 60% весит.
в чём может быть дело, разобрался кто?

[unique]

много таких было, флеша с донора(любой DB2020), восстановление GDFS через кукурузу, пока не один не вернулся, можно еще и имя патчем восстановить, но это на любителя

[lindros]

Тоже самое, шил разными версиями, грел, подымал флэшь результата ноль
всё осталось без изменений. на 60% весит.
в чём может быть дело, разобрался кто?

попробуй поставь перемычку на стабилизаторе в углу отсека, где флэшка стоит