При прошивке и unlock-патче K800i SEtool выдал ошибку и снял кредит.
Пробовал два раза, в чём проблема?
Вчера делал K800i, всё – ok.
v0.91380081/UNI
Card serial:00018266
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
SERVER CREDITS LEFT/USED: 2/70
CARD COUNTERS: FLASH 82, UNLOCK 114
Elapsed:2 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701996467 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:2019
Flash props sent ok
bypassing DB2020 security...
server step1 error:10060
unlock failed, that is fatal
Elapsed:75 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170701996467 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:2019
Flash props sent ok
bypassing DB2020 security...
server step1 error:23
unlock failed, that is fatal
Elapsed:64 secs.
