W300 убит прошивкой как быть?

[SlavaKis]

v0.91380084/UNI
Card serial:
Loaded 51 flash descriptors
llbug: port open error: 00000006
phone pre-boot failed,possible RECOVERY needed.
Elapsed:0 secs.
SERVER SUPPORT ENABLED.
llbug: port open error: 00000006
phone pre-boot failed,possible RECOVERY needed.
Elapsed:0 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
Flash ID check:897E
Flash props sent ok
writing D:\Mobila\SonyErricson\SETOOL\w300\R4GC010_1123260_GENERIC_JE\flash\brown\prepared\w300\r4gc010\R4GC010_1123260_GENERIC_JE.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:337
HDR block not accepted,error:A9
Elapsed:15 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
Flash ID check:897E
Flash props sent ok
writing D:\Mobila\SonyErricson\SETOOL\w300\R4GC010_1123260_GENERIC_JE\flash\brown\prepared\w300\r4gc010\R4GC010_1123260_GENERIC_JE.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:337
HDR block not accepted,error:A9
Elapsed:11 secs.
SERVER SUPPORT ENABLED.
RECOVERY MODE STARTED
Open COM port OK
Recovery:060330 1434 NPA4_CXC1326739_DB2010_SEMC_RECOVERY_R2A
Fetching phone data from OTP
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
THAT WILL KILL YOUR PHONE, ABORTED
Elapsed:4 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
Flash ID check:897E
Flash props sent ok
writing D:\Mobila\SonyErricson\SETOOL\w300\R4GC010_1123260_GENERIC_JE\flash\brown\prepared\w300\r4gc010\R4GC010_1123260_GENERIC_JE.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:337
HDR block not accepted,error:A9
Elapsed:11 secs.
SERVER SUPPORT ENABLED.
RECOVERY MODE STARTED
Open COM port OK
Recovery:060330 1434 NPA4_CXC1326739_DB2010_SEMC_RECOVERY_R2A
Fetching phone data from OTP
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
THAT WILL KILL YOUR PHONE, ABORTED
Elapsed:18 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
Flash ID check:897E
Flash props sent ok
CSloader version:
060727 1029 LIECXC1327364_COMPACT_SEMC_CS_LOADER__R3A002
Executing CSCA-based unlock.
loader startup: executed
csloader refused to start GDFS services,error is:29
failed, that is fatal
Fail
Elapsed:16 secs.
SERVER SUPPORT ENABLED.
Open COM port OK
ChipID:8040,EMP protocol:0301
PHONE IS RED RETAIL PRODUCT
FLASH CID detected:49
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35998800901651 CERT:RED
PATCH:061204 1529 HAN_DB2010_MEM_PATCHER_R2A007_CXC9876543210 0
Flash ID check:897E
Flash props sent ok
writing D:\Mobila\SonyErricson\SETOOL\w300\R4GC010_1123260_GENERIC_JE\flash\brown\prepared\w300\r4gc010\R4GC010_1123260_GENERIC_JE.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:337
HDR block not accepted,error:A9
Elapsed:18 secs.
SERVER SUPPORT ENABLED.
No server found.
CARD COUNTERS: FLASH 37, UNLOCK 39
Elapsed:2 secs.
Вот лог сетул купил недавно может что ни так делаю?

[ARBUZZ]

loader startup: executed
csloader refused to start GDFS services,error is:29



если это не заставляет задуматься вас - то флаг вам в чайку.
не так то сложно найти ответ.
а если кому то сложно прочитать что надо пользовать финализацию за логи, а также колор прошивки должен совпадать в данном случае с колором в теле то...

[gal]

кабель проверь(и вообще ощущение что у тебя порт занят другой прогой, ни чего в тот момент не шил?), а лучше используй dcu60, галки в settings все убери, кроме комплита

[the_laser]

автору трида читать мануал.
Hint: убери с установок "use server"