принесли с синим дисплеем проливал ничего непомогает
принесли с синим дисплеем проливал ничего непомогает
Так форум читай - и будет тебе счастье..
uragan если что знаешь лучше бы посоветовал а в форуме про софт как поправить нет ничего,хорошо есть люди которые могут помоч всегда им спасибо огромное особенно Botya 666
--------------------------------------------------------------------------------
Some people having trouble with LCD replacement for this model, so i was as fast as possible
1. Requred Software
Siemens EEprom Tool by Skylord
2. Connect switched off mobile to the selected com port press Init button & then phone power button shortly. If connect is established program will display phone information (If you can not pass this step just seek another job )
3. Press 'Load Custom..' then type '5007', 5007 block will appear in the right part
4. Copy this block to the left part with arrow button
5. Press save & select file type: .bin if you prefer hex-editor or .txt if you prefer notepad, then save the file.
6. Open saved .bin file with hex-editor or .txt file with notepad. There will be 10 bytes there:
AA BB xx xx CC xx DD xx xx xx
AA = Current contrast value for the Main LCD
BB = Middle contrast value for the Main LCD (AA = BB after using 'Factory Settings' function in the phone)
CC = Current contrast for the Sub LCD
DD = I think the same as BB, but for the Sub LCD(not tested)
7. Change the values according to your problem:
If main LCD is blue increase AA&BB, if white decrease them
If sub LCD contrast is low increase CC, if high decrease it.
8. Reopen edited file with EEprom Tool, copy 5007 block to the right part, press 'Save Selected'(If you press 'Save All' you may damage your phone)
9. Press 'Exit', power up phone and look at the results, if not satisfied just try higher or lower values(test LCD module had B0h for main and 1Bh for sub).
@ Apl читай внимательно, чел про С62 спрашивает, там эта солюшка не катит
Apl
Дорогой мой, я тебе и так подсказал что данная тема раскрыта уже на этом форуме. А лазить по нету и искать для тебя данный топик - тебе не кажется что это уж слишком?
Создаётся впечатление что тут собралось половину лентяев, которые сидят и плачут что у них модемное соединение и нет возможности просмотрерь форум.
пишут что на с62 как раз работает
Мда
Если ты приконектишь С62 к Siemens EEprom Tool by Skylord. То тогда тебе можно памятник поставить
извиняюсь все что выше написано про контраст это для cf62