Включаю, появляются песочные часы и все. (висит), ждал примерно 1 час и не чего не изменилось.
Что это может быть?
Включаю, появляются песочные часы и все. (висит), ждал примерно 1 час и не чего не изменилось.
Что это может быть?
прошивка полетела, поищи тут, введёшь модельный номер.
http://www.canyon-tech.com/support/d...03135134542690
а тут как шить
How I can update firmware in my MP3Sx player?
Please, update your device with the latest firmware: 1. Visit product page, section Download; 2. Check your model Serial Number: open battery cover and look for sticker inside the battery bay. There should be printed Serial number; 3. Carefully choose and download from the Download section corresponding Software Pack, for devices with your Serial Number; 4. Unzip archive to the any temporary created folder and run Setup.exe (Device drivers and utility will be installed); 5. Connect your PC and MP3 Player with included USB cable, (your MP3 player should be recognized by your PC); 6. Run Firmware Download procedure, utility should find your MP3Sx player; 7. Select "Format Data Area". Warning: Procedure will delete all files stored in your MP3 player, please make backup to your PC or another storage before you perform it; 8. Close window and unplug your MP3 player, when format/firmware updating will be completed.
After firmware updating my MP3Sx doesn't wake-up...
You can recover your device: 1. Visit product page, section Download; 2. Check your model Serial Number: open battery cover and look for sticker inside the battery bay. There should be printed Serial number; 3. Carefully choose and download from the Download section corresponding Software Pack, for devices with your Serial Number; 4. Unzip archive to the any temporary created folder and run Setup.exe (Device drivers and utility will be installed); 5. Take your MP3 Player, remove battery from the bay. PRESS and HOLD the "Play/Stop" button. Note: Do not release button during procedure; 6. Connect your PC and MP3 Player with included USB cable, (your MP3 player should be recognized by your PC); 6. Run Firmware Download, utility should find your MP3Sx player; 7. Press "Start" button, then "Next", "Next"... Program will execute automatically. Note: Once procedure is started, you can release the "Play/Stop" button; 8. Close window and unplug your MP3 player, when format/firmware updating will be completed. 9. Insert battery into bay and power-up device.
How can I update/recover firmware in my CN-MPOLED2 series player?
Please use the following procedure: Install software from bundled CD. It will also install Windows driver required for recovery mode. Unpack latest firmware from Canyon web site to the folder where software in step 1 was installed (by default it will be "C:\Digital\MP3MMC Audio Player"). You should overwrite all existing files in that folder. Disconnect CN-MPOLED2 from PC, remove battery from player. Press and hold “Play” button while connecting player to PC. Windows will install recovery mode driver (device is not accessible as removable drive in this mode). Start “Firmware Download” application. It will find the device and enable firmware update. Start firmware update and wait until it completes. Do not turn off or disconnect device during this operation. When update completes, press “Show Details” button to ensure that firmware was updated properly.
дед Никифор (10.10.2008)
Модельный номер? Где его глянуть? ->Это P586473191
И как его прошить через кабель который с ним шел?
вот там так написано : if you know full or partial product model code (beginning with "CN-", "CNR-", "CNP-" or "CNS-") type it into search field and click Search
какая у тебя модель?
Такая же проблема,нужна прошивка,зашел на http://www.canyon-tech.com на другие плееры есть прошивка,на СN-MP3SOE пусто
britanec (14.08.2009), дед Никифор (10.10.2008)
[QUOTE=sanecheg]http://rapidshare.com/files/31794660/CN-MPS3x.rar
Спасибо
у меня тоже каньон на гиг... прошил и потерялось 50% объема )
ВОТ МОЯ МОДЕЛЬ, МОЖЕТ ЕСТЬ ЛИНК НА НЕЁ? (ПРОШИВКУ)СN-MP3SOF
Прошил, после этого не вкл, может не той прошивкой ""CN-MP3Sx2xxxxxxx (v1.1.6A)"
Сейчас нашел CN-MP3Sx2xxxxxxx *.exe одинаковые. подключил, нашло плеер иммено в системе и пишет "Media state is not initializated" типо не проходит инициализация плеера, что делать?
Как определил модель? зашел на сайт и посмотрел у меня на гиг, и по рисунку она точ в точ!
http://www.canyon-tech.com/products/...P3SO/CN-MP3SOF
Дайте родную прошивку плиз.
Все работает!
Дело было в том что на эту модель прошивки нет А, как выйти из положения? ПРОСТО
Я на свой страх и риск взял эту прошивку http://rs62.rapidshare.com/files/167...n_CN-MP3OE.zip
Пролил её примерно получилось с раза 10~15 ;-) Если кому надо подробная консультация пишите в личку.
У меня после прошивки, он стал не 1GB а 512 MB. но потом я его ещё раз прошил, и все порулило 1Gb
Если тело ваще не определяется, то вымите батарею, нажмите на "Play" и не отпуская его втыкните кабель в него и в комп, и дождитесь пока система его не определит, когда определит. кнопку можно отпустить. и после этого запускаем прошивальщик, не каких галак не ставим и жмем старт, если не порулит, то потом можно с галкой попробовать!
Удачи /Кто мучается, у того все получится ;-)/ 4-часа за компом и тело реанимировано
Тут почитайте, после картинок.
http://www.softservice.com.ua/content/view/39/9/
В благодарность принимаю голос :-)
Последний раз редактировалось Комар; 02.11.2007 в 08:02.
DJ_TON (20.11.2007), FixMobile (14.03.2010), LTRG (18.02.2008), vitaliq_ (15.10.2009), дед Никифор (10.10.2008)
Скинь мне єту прошивку ([email protected]), а то я не очень понимаю как ее скачать
Комар, всё реально работает, я щас часа 2 назад восстановил такой же, по твоей методе. Только вот прошился он сразу и увидел сразу весь свой гиг. Галки не ставил, версия понизилась с 8 до 6..мучался 3 минуты и целый день до этого в поисках прошивки.
Хорошо, что пригодился метод народу!
Бывают тупиковые ситуации (не раз в них был) но люди выводили на правильный путь.
Удачи.