Показано с 1 по 5 из 5

Тема: превод на русский

  1. #1
    Member
    Регистрация
    15.05.2007
    Адрес
    15 rus
    Сообщений
    729
    Спасибо
    192
    Благодарностей: 78 : 47

    превод на русский

    How to repair dead (can’t Power-On) “Chinese” phone with CPU MT6226 MT6227 etc. via ASK/RPL service.



    File version
    1.04

    File date
    2007 May 07

    Source
    www.infinity-box.com






    Here is instruction abour repair “Chinese” phones that can’t power-on but have absolutely good hardware.

    Please, before you start to make “Repair” procedure, be sure that phone hardware is completely good, in other case there is no any reason to make software “Repair” procedure.



    Before you start to make repair procedure:



    1. Only some of “Chinese” models based on MT6226, MT6227 (and higher) CPU need to be repaired via this “Repair” procedure. Some phones no need to make special “repair” procedure and can be repaired by ordinary flashing with good firmaware. Just press “Detailed information” button in “ChineseMiracle” software and you will see is it need to repair your phone software or not.



    2. Before “Repair” process your phone must be flashed with correct firmware (suitable for your phone hardware).



    3. How to detect what firmware is good for your phone: right now it’s quite hard question, there is no exact answer. There is one good method with name: “try different firmware files one by one”.



    Repair procedure:



    Start “ChineseMiracle” software.
    Press "Detailed information" button in "Service" page.
    Software read from phone some important info.
    If you will see in Log window text like: “2nd [standard] (or higher) generation model detected” this means that it’s no need to “Repair” your phone via ASK/RPL file but you must simply try to flash phone with different firmware files and finally phone will be alive. No need to read next steps in this manual.
    you will see in Log window text like: “2nd [enhanced] (or higher) generation model detected” this means that probably phone damaged (can’t power-on due to software fault) and can be repaired via “Repair” procedure. Need to read next steps in this manual.
    If phone damaged due to software fault, software detect this automatically and offer you to write RPL file in phone (to repair it).
    If you already have RPL file: press "Yes" and wait several seconds. Phone repaired. No need to read next steps in this manual.
    If you don’t have RPL file yet: press "No" and follow next steps.
    Software offer you to create ASK file. Press "Yes".
    Use Infinity-Box “Client” and generate RPL file from your ASKL file.
    Copy received RPL file in folder with “ChineseMiracle” software and make "Detailed information" again (to write received RPL file in your phone).


    Additional information:



    Attention: each phone has it’s own RPL file, also if you write new firmware in your phone you need to get new RPL file.



    Currently not all phones can be repaired. We work every day to make “Repair” procedure better, so always be sure that you use latest version of “ChineseMiracle” software for “repair” procedure.



    If software can’t create ASK file during “Detailed information” operation and you see message like:

    “warning: unknown identification structure”, this means that it’s need to make some more steps to repair your phone:

    You need to have on hands (or some************ who have Infinity-Box) the same good working phone (with the same firmware version), but not only flash backup created by other software. Backup files created by “FlashTool” (as well as via other tools) CAN’T help, NOT suitable for repair procedure.
    Press "Detailed information" button in "Service" page, new file will be created after operation with name like “system_log…”.
    Press “Read flash” button in “Service” page and wait while software read flash backup.
    Send to support e-mail the next files from “ChineseMiracle” folder:
    4.1. system_log_….

    4.2. operation.log

    4.3. backup_.....

    Wait new “ChineseMiracle” software release and repair your phone.


    есть ли превод на русский

  2. #2
    Member Аватар для Metis3
    Регистрация
    28.11.2005
    Адрес
    Ташкент
    Сообщений
    649
    Спасибо
    91
    Благодарностей: 125 : 90
    У меня есть на русском только

    File version 1.01
    File date 2007 Feb 16

    Если надо, выложу

  3. #3
    Newbie
    Регистрация
    02.10.2007
    Адрес
    Волгоград
    Сообщений
    2
    Спасибо
    0
    Благодарностей: 0 : 0
    Цитата Сообщение от Metis3
    У меня есть на русском только

    File version 1.01
    File date 2007 Feb 16

    Если надо, выложу

  4. #4
    Newbie
    Регистрация
    02.10.2007
    Адрес
    Волгоград
    Сообщений
    2
    Спасибо
    0
    Благодарностей: 0 : 0
    Выкладывай коли не жалко... у меня чскоро психоз начнется с этим китайцем!!!!!

  5. #5
    Member Аватар для Metis3
    Регистрация
    28.11.2005
    Адрес
    Ташкент
    Сообщений
    649
    Спасибо
    91
    Благодарностей: 125 : 90
    Вот
    Последний раз редактировалось Metis3; 04.11.2007 в 15:29.

Похожие темы

  1. Ответов: 3
    Последний ответ: 29.10.2009, 17:56
  2. Z8 и U9 русский?
    от Abzal в разделе P2k Motorola
    Ответов: 3
    Последний ответ: 04.05.2008, 14:34
  3. Nokia 6255 превод из 1G в 2G
    от koles в разделе CDMA800 & TDMA
    Ответов: 1
    Последний ответ: 25.01.2007, 21:52
  4. ВЕ - 3 и русский
    от soi_gus в разделе Alcatel
    Ответов: 3
    Последний ответ: 30.07.2004, 12:56

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru