Samsunc E730+ прошиваеться нормально но в конце выдает ошибку
Error: S_FT_Download_Fail(4008)
Download to flash fail! Please CTRL+ALT+T to turn on debug log then reproduce again!
C:BROM_DLL.log would be created and record more detail information.
А это лог теста
================== Memory Detection ==================
Internal SRAM size = 0x00080000 (512KB)
External RAM size = 0x00400000 (32Mb)
NOR Flash Device = "[SHARP] LRS1828C, LRS1874" (36)
NOR Flash size = 0x01000000(128Mb)
NAND Flash Device = "[SAMSUNG] K9K1208X0C" (4)
NAND Flash size = 0x04000000(512Mb)
================== Memory Test ==================
[ RAM Test ]
Data Bus Test : [D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
Address Bus Test : [A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21]
RAM Stress Test:
- Pattern Test(0x44332211) : OK!
- Pattern Test(0xA5A5A5A5) : OK!
- Pattern Test(0xA5A5A500) : OK!
- Pattern Test(0xA500A500) : OK!
- Pattern Test(0xA5000000) : OK!
- Pattern Test(0x00000000) : OK!
- Pattern Test(0xFFFF0000) : OK!
- Pattern Test(0xFFFFFFFF) : OK!
- Increment/Decrement Test( 8Bit) : OK!
- Increment/Decrement Test(16Bit) : FAIL!
В чем может быть трабла?
Ответить с цитированием
