Код:
FSFLASH: CPU is ARM 926, revision 3, architecture 6
FSFLASH: Inst Cache size is 16.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Data Cache size is 8.00 Kb, 4-way, 32 bytes/line.
FSFLASH: Flash extends over two chip select
FSFLASH: NOR (Sibley) Flash device @ [0x44000000-0x47FFFFFF] 65536 Kb
FSFLASH: Vendor (0x89): Intel
FSFLASH: Device: ?????? (0x887E)
FSFLASH: Unique Device Number: 0xFB96C0B226CBEA26
FSFLASH: Page size: -
FSFLASH: Write Buffer Size: 1024 bytes
FSFLASH: Burst Mode: ON
FSFLASH: RAM @ 0x4C000000
FSFLASH: Burst Mode: ON
FSFLASH: Erase region [0x44000000-0x47FFFFFF] has an erase block size of 256 Kb
FSFLASH: Mounting logical flash device 0
FSFLASH: Flash segment 0:0 located @ [0x45900000,0x47DFFFFF] (37888 Kb)
FSFLASH: Flash type: NOR
FSFLASH: Block size: 2048
FSFLASH: Logical erase size: 256 KbMALL_DEBUG: reserved; critical 32768 bytes at 0x4C3F9F3C
MALL_DEBUG: reserved; normal 32768 bytes at 0x4C401F5C
FSFLASH: Write processes started, pid = 0x1002A.
FSFLASH: Erase processes started, pid = 0x1002B.
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Re-allocated block LUT from 18326 to 29811 logical blocks
FSFLASH: Stage 4
FSFLASH: Config block located @ 0x45900800
FSFLASH: DELETED block 8 @ 0x46323000 rolled back
FSFLASH: DELETED block 19 @ 0x46384000 rolled back
FSFLASH: Mount block located @ 0x4638F000
FSFLASH: UPDATED block 19 @ 0x46390800 rolled back
FSFLASH: UPDATED block 8 @ 0x46391000 rolled back
FSFLASH: CLEAN blocks 603
FSFLASH: MIN CLEAN blocks 256
FSFLASH: BAD blocks 0
FSFLASH: State 5 skipped
FSFLASH: Stage 6.1
FSFLASH: Stage 6.2 skipped
FSFLASH: Stage 7
FSFLASH: Stage 8
FSFLASH: Check done
FSFLASH: TOTAL number of blocks: 18944
FSFLASH: AVAILABLE blocks: 18326
FSFLASH: MAX logical block nbr: 29810
FSFLASH: COMMITTED blocks: 4816
FSFLASH: FREE blocks: 13510
FSFLASH: DIRTY blocks: 13511 (0 BAD)
FSFLASH: CLEAN blocks: 600 (600 NOR)
FSFLASH: HEADER blocks: 17
FS: Mounting FAT file system partition / for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT16
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 59037 (0xE69D)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 64 (0x40)
FS: Clusters: 14736 (0x3990)
FS: Cluster start: 96 (0x60)
FS: Cluster last: 59039 (0xE69F)
FS: Partition not closed
FS: Phone not properly shut down, running FSCK on partition /
FS: FSCK level is 1
FSCK: Directory Check
FS: Partition / set to clean
FSCK: Done
FS: File System Size: 14736 (29472 Kb)
FS: Free Logical Blocks: 10358 (20716 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 4378 (8756 Kb)
FS: Partition / mounted
FS: Mounting FAT file system partition /tpa/system/bg_images/cache for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 2197 (0x895)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 8 (0x8)
FS: Clusters: 540 (0x21C)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 2199 (0x897)
FS: File System Size: 540 (1080 Kb)
FS: Free Logical Blocks: 540 (1080 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 0 (0 Kb)
FS: Partition /tpa/system/bg_images/cache mounted
FS: Mounting FAT file system partition /ifs for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 1997 (0x7CD)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 8 (0x8)
FS: Clusters: 490 (0x1EA)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 1999 (0x7CF)
FS: File System Size: 490 (980 Kb)
FS: Free Logical Blocks: 170 (340 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 320 (640 Kb)
FS: Partition /ifs mounted
FS: Mounting FAT file system partition /system for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 1021 (0x3FD)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 8 (0x8)
FS: Clusters: 246 (0xF6)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 1023 (0x3FF)
FS: File System Size: 246 (492 Kb)
FS: Free Logical Blocks: 224 (448 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 22 (44 Kb)
FS: Partition /system mounted
FS: Mounting FAT file system partition /smsdata for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT12
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 957 (0x3BD)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 8 (0x8)
FS: Clusters: 230 (0xE6)
FS: Cluster start: 40 (0x28)
FS: Cluster last: 959 (0x3BF)
FS: File System Size: 230 (460 Kb)
FS: Free Logical Blocks: 224 (448 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 6 (12 Kb)
FS: Partition /smsdata mounted
FS: Mounting FAT file system partition /usb for read/write
FS: SecPerClus = 4
FS: BytesPerSec = 512
FS: RootEntCnt = 512
FS: NumFATs = 1
FS: RsvdSecCnt = 1
FS: Type: FAT16
FS: AtFSX: 11.13
FS: Block size: 2048
FS: Read size: 2048
FS: FAT mirroring: OFF
FS: Sector locations
FS: Size: 54005 (0xD2F5)
FS: PBR: 3 (0x3)
FS: FAT start: 4 (0x4)
FS: Active FAT start: 4 (0x4)
FS: Root start: 60 (0x3C)
FS: Clusters: 13479 (0x34A7)
FS: Cluster start: 92 (0x5C)
FS: Cluster last: 54007 (0xD2F7)
FS: File System Size: 13479 (26958 Kb)
FS: Free Logical Blocks: 13479 (26958 Kb)
FS: Free Physical Blocks: 13510 (27020 Kb)
FS: Used Blocks: 0 (0 Kb)
FS: Partition /usb mounted
FS: Partition / set to dirty
BuildInfo: Label: <RTPE_ELLEN_EDGE_CUST_061016_1435> Variant: <cxc1720007_E110_PHONE_HelenEdge>
BuildInfo: Generated: 2006-10-16 18:06 by Off.Bld
Product : <Sony Ericsson W810> Version: 0000
HW Setup : Marita Compact P2A (Id:0x8040) IRDA: B042 BT: C042 RS232:
Vendor : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000
OS: Starting PM
OS: Adding program type APP_FLASH
OS: Adding program type APP_RAM
OS: Adding program type SYS_FLASH
OS: Adding program type SYS_RAM
OS: Starting RTL_ELF
OS: core startup complete!
Prototype start process started!
MPH: PID 65602
RLC: RLC_LLC
RLC: RLC_IDLE_REQ = 7500
RLC: RLC_GMM_DATA_REQ = 7501
RLC: RLC_DATA_REQ = 7502
RLC: RLC_UNITDATA_REQ = 7503
RLC: RLC_RLC_DATA_REQ = 7505
RLC: RLC_RLC_UNITDATA_REQ = 7506
RLC: RLC_DATA_RSP = 7509
RLC: LLC_RLC
RLC: RLC_DATA_CNF = 7510
RLC: RLC_DATA_IND = 7511
RLC: RLC_STATUS_IND = 7512
RLC: RR_RLC
RLC: RR_TBF_ESTABLISH_REQ = 6990
RLC: RR_UPLINK_TBF_RELEASE_REQ = 6992
RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 6993
RLC: RR_TBF_RELEASE_RSP = 6994
RLC: RR_DOWNLINK_ACK_NACK_REQ = 6995
RLC: RLC_RR
RLC: RR_TBF_ESTABLISH_CNF = 7000
RLC: RR_UPLINK_TBF_RELEASE_CNF = 7002
RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 7003
RLC: RR_TBF_ESTABLISH_IND = 7001
RLC: RR_TBF_RELEASE_IND = 7004
RLC: RR_UPLINK_ACK_NACK_IND = 7005
RLC: PH_RLC
RLC: PH_RLC_DATA_REQ = 7335
RLC: PH_RLC_DATA_RELEASE_REQ = 7337
RLC: PH_RLC_CONTROL_REQ = 7338
RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 7340
RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 7341
RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 7342
RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 7343
RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 7344
RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 7345
RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 7346
RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 7347
RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 7348
RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 7349
RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 7350
RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 7351
RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 7352
RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 7353
RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 7354
RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 7355
RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 7356
RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 7357
RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 7358
RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 7359
RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 7360
RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 7361
RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 7362
RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 7363
RLC: PH_RLC_RELEASE_REQ = 7364
RLC: RLC_PH
RLC: PH_RLC_DATA_CNF = 7385
RLC: PH_RLC_EGPRS_DATA_TYPE1_CNF = 7409
RLC: PH_RLC_EGPRS_DATA_TYPE2_CNF = 7410
RLC: PH_RLC_EGPRS_DATA_TYPE3_CNF = 7411
RLC: PH_RLC_DATA_IND = 7386
RLC: PH_RLC_EGPRS_DATA_RTS_IND = 7408
RLC: PH_RLC_DATA_RTS_IND = 7387
RLC: PH_RLC_DATA_RELEASE_CNF = 7388
RLC: PH_RLC_CONNECT_IND = 7389
RLC: PH_RLC_CONTROL_CNF = 7390
RLC: PH_RLC_CONTROL_IND = 7391
RLC: PH_RLC_RELEASE_CNF = 7392
RLC: RLC_TIMER
RLC: RLC_TIMER_T3164 = 7580
RLC: RLC_TIMER_T3166 = 7581
RLC: RLC_TIMER_T3180 = 7582
RLC: RLC_TIMER_T3182 = 7583
RLC: RLC_TIMER_T3190 = 7584
RLC: RLC_TIMER_T3192 = 7587
RLC_UL: S I
RR: PID 65604
RR: RR_MM_PRIM 6750
RR: MM_RR_PRIM 6760
RR: MPH_RR_PRIM 6770
RR: RR_MPH_PRIM 6840
RR: DL_RR_PRIM 6890
RR: RR_DL_PRIM 6900
RR: RR_MMM_PRIM 6960
RR: MMM_RR_PRIM 6970
RR: RR_RLC_PRIM 6990
RR: RLC_RR_PRIM 7000
RR: PH_MPH_PRIM 7065
RR: MPH_PH_PRIM 7150
RR: MPH_CB_PRIM 7225
RR: CB_MPH_PRIM 7235
RR: MPH_MMM_PRIM 7265
RR: MMM_MPH_PRIM 7275
RR: PH_RLC_PRIM 7335
RR: RLC_PH_PRIM 7385
RR: RLC_LLC_PRIM 7500
RR: LLC_RLC_PRIM 7510
RR: RR_LLC_PRIM 7550
RR: LLC_RR_PRIM 7560
RR: PH_RR_PRIM 7770
RR: RR_PH_PRIM 7780
RR: RR_TIMER_PRIM 7740
RR: MPH_TIMER_PRIM 7710
RR: T3206_VALUE: 800 ms
RR: T3208_VALUE: 4430 ms
RR: T3210_VALUE: 300 ms
MPH_Low: PID 65607
LLC: PID 65608
LLC: <SMS 3873
LLC: >SMS 3884
LLC: <SNDCP 7450 7458
LLC 1: state 0
LLC 3: state 0
LLC 5: state 0
LLC 7: state 0
LLC 9: state 0
LLC 11: state 0
RLC_DL: S I
### Print Server: Requesting DebugMux channel...
648 ### Print Server: Started OK
649 AM: MODULE_INIT
649 LLRS232: EILD_LLRS232_HandleSignal_R_Do_Start
650 [SIM] State Changed: SIM_STATE_NULL, Appl: 0, Ref: 0E
650 [ICC-LD] ICC_Reader_0_Process Started
650 [ICC-LD] Status Changed: ICC_READER_DEACTIVATED, Reader: 0
651 RLink: RLINK_PH
651 RLink: PH_RLINK_CONNECT_IND = 6722
651 RLink: PH_RLINK_DISCONNECT_IND = 6723
651 RLink: PH_RLINK_RTS_IND = 6720
651 RLink: PH_RLINK_DATA_IND = 6721
651
RLC: PH_RLINK
651 RLink: PH_RLINK_DATA_REQ = 6710
651
RLink: RLINK_RLP
651 RLink: RLINK_RLP_RTS_IND = 5074
651 RLink: RLINK_RLP_DATA_IND = 5076
651
RLC: RLP_RLINK
651 RLink: RLINK_RLP_DATA_REQ = 5077
651 RLink: RLINK_RLP_DTX_REQ = 5078
651
RLC: RLINK_RR
651 RLC: RR_CHANNEL_MODE_INFO_IND = 24280
651 RLC: RR_CHANNEL_MODE_MODIFY_IND = 24281
651 RLink: State IdleILD_HCITL.c: 603 EILD_HCITL_SetTXPin: PinLevel = 0
652 OS Time and RTC syncronized. The time diff was 1983 sRH: Activate on LRRAT: G
652 RH state: InactiveRational Rose RealTime C Target Run Time SystemRelease 6.50.C.00
652 Copyright (c) 1993-2003 Rational Software
652 RTS ERROR: Failed to allocate additional 896 byte as static memory, allocating as heap, 1039 32-bit needed (1025 configured)
652 RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1040 32-bit needed (1025 configured)
653 RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 1042 32-bit needed (1025 configured)
653 RTS ERROR: Failed to allocate additional 12 byte as static memory, allocating as heap, 1045 32-bit needed (1025 configured)
653 RTS ERROR: Failed to allocate additional 8 byte as static memory, allocating as heap, 1047 32-bit needed (1025 configured)
654 RTS ERROR: Failed to allocate additional 4 byte as static memory, allocating as heap, 1048 32-bit needed (1025 configured)
654 SM: Initiated; ProcessID = 65660 !
654 NS versions:
654 cnh1010128_rrtose => CNH1010128_R5Z
654 cnh1010235-2_ns_cas => RTPE_ELLEN_EDGE_CUST_060925_1815
654 cnh1010237_ns_was_if => CNH1010237_R9AC
654 cnh1010238_ns_was => CNH1010238_R9AV
654 cnh1010239_ns_wcdma_phy_if => CNH1010239_R10J
654 cnh1010278_rose_rt_codegen => CNH1010278_R4F
654 cnh1601471_ns_gas_l23 => RTPE_ELLEN_EDGE_CUST_060925_1633
654 cnh160294-3_ns => CNH160294_3_R3X
654 cnh160552_applib_v42bis => CNH160552_R2E
654 cnh160573_network_asi => CNH160573_R6X
654 cnh160634_ns_swbp => RTPE_ELLEN_EDGE_CUST_060925_1633
654 cnh160654_ns_gas_sndcp => CNH160654_R3J
654 cnh160655_ns_cas_ntcsd => CNH160655_R5K
654 cnh160884_ns_rrt_top_model => CNH160884_R7M
654 SEMC_ACB: Process started, pid 0x100d6.
654 SEMC_ACB: Version = ACBM V3.12, debuglevel = 0x1131MM: reset TMSI
W3
и так бесконечно W3...
Подскажете?
Ответить с цитированием
Сообщение от ManSan
