Показано с 1 по 4 из 4

Тема: Помогите с 8800

  1. #1
    Newbie
    Регистрация
    15.01.2007
    Адрес
    Россия
    Сообщений
    26
    Спасибо
    0
    Благодарностей: 0 : 0

    Помогите с 8800

    Есть КИТ подделка Nokia 8800 в железном корпусе. Разьем 8pin.
    Надо прошить - но незнаю какой должен быть Flash файл.
    Infinity Log - read detailed information
    COM6 [VCP0] selected
    Device: Autodetect 6205-6227 NOR
    Checking data, wait...
    advanced flash detection active
    Action: read/check detailed information
    Boot...
    Press and HOLD Power button now !
    baud autodetection active
    19200
    Connecting, wait...
    Initializing[6226:8A02:8A00]...
    chip: 0031:184D:A2A9
    boot step size: 0400
    Release Power button now !
    Boot Done
    Initialize...
    detecting chip #00 in region #00...
    flash: 01227E22212200:29EA0000000000
    flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    detecting chip #01 in region #00...
    flash: 01227E22212200:29EA0000000000
    flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    number of flash chip/regions detected: 02/01
    Initialize Done
    Set baud...
    921600
    Set baud Done
    Identification...
    device parameters autodetection in progress..
    detecting chip #00 in region #00...
    flash: 01227E22212200:29EA0000000000
    flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    detecting chip #01 in region #00...
    flash: 01227E22212200:29EA0000000000
    flash: Amd AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
    it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
    number of flash chip/regions detected: 01/01
    total flash region size: 01000000
    detect device identification#1...
    detection phase #1...
    .
    detection phase #2...
    ................................................................................................................................
    warning: identification#1 information not found, possible reasons:
    .old firmware type w/o identification#1 data
    .damaged firmware
    .damaged hardware
    if phone works fine just ignore this warning
    detect device identification#1 finished
    detect device identification#2...
    detection phase #1...
    .
    warning: optional information not found
    detect device identification#2 finished
    detecting eeprom/ffs area in 1 chip(s)...
    standard eeprom/ffs offset assigned: 00E00000
    flash: 01227E22212200:29EA0000000000
    checking area[00000000]: 00000000-00FFFFFF...
    eeprom/ffs found near: 00E00000
    detecting eeprom/ffs size...
    eeprom/ffs size: 00200000
    ffs chip: 00
    eeprom/ffs area: 00000000:00E00000-00FFFFFF
    detecting ffs structure pass 1...
    ..............
    detect standard fat location pass #1...
    ........................................................
    detect extended fat location pass #1...
    .................................................
    detect standard fat offset pass #1...
    detect standard fat data...
    fat layout detection complete
    ffs element #1 detected ok
    Finished, time used: 60 sec
    Remove/Install battery now !
    слил Full с данного тела - файл обозвался
    backup_flash_20080206-005323.B0M
    на supporte infinity не смог найти ни чего похожего
    где взять прошивку на эту хрень?

  2. #2
    Moderator Аватар для hELLISh
    Регистрация
    05.01.2004
    Адрес
    Россия, 51 штат
    Сообщений
    2,556
    Спасибо
    210
    Благодарностей: 606 : 218
    А зачем прошивать ? Что с аппаратом ?
    Не буду врать - не помню точно, но попробуй сделать Repair security - в логе покажет версию .

  3. #3
    Banned
    Регистрация
    04.03.2007
    Адрес
    ВоронеЖ
    Сообщений
    81
    Спасибо
    204
    Благодарностей: 15 : 7
    warning: identification#1 information not found, possible reasons:
    .old firmware type w/o identification#1 data
    .damaged firmware
    .damaged hardware

    Внимание:информация о идентефикаторе#1 НЕ найдена,возможные причины:
    Старое П/О без идентификатора#1
    ПОВРЕЖДЕНО П/О
    ПОВРЕЖДЕНО ЖЕЛЕЗО
    Похоже,что Инфинити не может определить версию прошивки!
    Возможные причины указаны ВЫШЕ!

  4. #4
    Newbie
    Регистрация
    15.01.2007
    Адрес
    Россия
    Сообщений
    26
    Спасибо
    0
    Благодарностей: 0 : 0
    Не буду врать - не помню точно, но попробуй сделать Repair security - в логе покажет версию .
    Спасибо! Помогло!

Похожие темы

  1. Помогите с 8800
    от АЛІК в разделе Китайские телефоны для новичков
    Ответов: 2
    Последний ответ: 11.02.2009, 23:22
  2. Помогите с 8800
    от NASKUL в разделе Китайские телефоны для новичков
    Ответов: 3
    Последний ответ: 05.01.2008, 22:34
  3. 8800(d/b) - помогите опознать.
    от 1Slim1 в разделе Nokia для новичков
    Ответов: 3
    Последний ответ: 18.10.2007, 00:34
  4. Помогите с 8800
    от Fox. в разделе Nokia для новичков
    Ответов: 3
    Последний ответ: 05.07.2007, 13:40
  5. 8800 RM-13 V3.23 ПОМОГИТЕ !
    от TREFON в разделе Телефоны DCT4/WD2/TIKU
    Ответов: 6
    Последний ответ: 29.07.2005, 19:51

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru