ALL LG PHONES PINOUTS
************************LG240,ME240q pinout***************************************
For flashing-unlocking - use U8110 cable.
For working with service functions-Read IMEI,Write IMEI, Phone Reset - use
LG7050 cable.
************************KE500,ME550 pinout for flashing***************************
keybord up
18.............1
17 - RX (data to phone)
16 - TX (data from phone)
1,4,14,18 - GND
For working with service functions -Read IMEI,Write IMEI, Phone Reset - use
KG800 cable.
*****************************G1800 pinout****************************************
Use standart Motorola T191 Cable
*****************************KG190,C2500 pinout**********************************
keyboard up
/12345\
_______
1 - GND
3 - TX (data from phone)
4 - RX (data to phone)
****************MG160,KG270,KG370,KG320,KG800 pinout******************************
keybord up
18.............1
7 - RX (data to phone)
6 - TX (data from phone)
1,4,14,18 - GND
*******C1100,C1200,C1300,C1400,LG40xx,LG70XX,L11XX pinout************************
keybord up
24.............1
3,12,19,23 - GND
13 - RX (data to phone)
14 - TX (data from phone)
6 - via 10 kOm resistor to +5V
*****LG G510,B1300,G1500,3000,5200,5300,5400,7100,7070 pinout********************
keybord up
18.............1
2 - RX (data to phone)
3 - TX (data from phone),connect it via resistor 15 kOm to +5V
1,13 - GND
15 and 18 connect together
***********************LG-U8110,U8120 pinout**************************************
keybord up
24.............1
12,19 - GND
17 - RX (data to phone)
18 - TX (data from phone)
2 and 21 connect together
Code to reset phone(must be used if after unlocking phone still is locked or has
user code) :
2945#*# and later "Factory reset".
:rules:
