Показано с 1 по 11 из 11

Тема: 2760 contact service

  1. #1
    Member
    Регистрация
    04.10.2005
    Адрес
    Россия
    Сообщений
    236
    Спасибо
    3
    Благодарностей: 45 : 10

    2760 contact service

    телефон новый, ещё не продавался, пытаюсь включить только появляется изображение и тел уходит в перегруз, ну как обычно бывает у 6300,6233 и им подобные, подумал прошивка решил прошить в результате получил:
    Getting MCU ID

    MCU ID: 0x3162
    FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.00
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    HW version: 3000
    PCI version:
    UEM version: 1328
    UPP version: 12642
    RFIC version: 0500
    DSP version: GDSP_P06w45.v32
    LCD version: SUEZ
    PPM version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    EG
    BT MCM version: 2222-v101
    Content Pack version: Content: ad
    V 04.22
    31-08-07
    RM-258
    (c) Nokia

    Production serial number: XD2856895
    Product code: 0554088
    Module code: 0203319
    Basic production code: 0515047
    Flash code:
    Order number:
    Product specific data:
    Long production SN: 0
    ATO:
    Default SN type:
    IMEI plain: 358053017051423
    IMEI spare to net: 3A 85 50 03 71 50 41 02
    IMEI SV to net: 33 85 50 03 71 50 41 12 F0
    Master Code: 0217154374
    Phone type: RM-258, Software version: 04.22, Language Pack: EG
    User code: 12345

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
    Saved INI not found, loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0554088

    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Setting test mode...
    Setting FULL FACTORY...
    Operation took 0 minutes 4 seconds...
    Done!
    Setting test mode...
    Resetting USER DATA...
    Operation took 0 minutes 1 seconds...
    Done!
    Setting test mode...
    Resetting LEAVE FACTORY...
    Operation took 0 minutes 0 seconds...
    Done!
    Setting test mode...
    Resetting SERVICE CENTER...
    Operation took 0 minutes 0 seconds...
    Done!
    Setting test mode...
    Resetting UPGRADE SOFTWARE...
    Operation took 0 minutes 0 seconds...
    Done!
    Setting test mode...
    Resetting PRODUCTION TUNE...
    Operation took 0 minutes 0 seconds...
    Done!
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    HW version: 3000
    PCI version:
    UEM version: 1328
    UPP version: 12642
    RFIC version: 0500
    DSP version: GDSP_P06w45.v32
    LCD version: SUEZ
    PPM version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    EG
    BT MCM version: 2222-v101
    Content Pack version: Content: ad
    V 04.22
    31-08-07
    RM-258
    (c) Nokia

    Production serial number: XD2856895
    Product code: 0554088
    Module code: 0203319
    Basic production code: 0515047
    Flash code:
    Order number:
    Product specific data:
    Long production SN: 0
    ATO:
    Default SN type:
    IMEI plain: 358053017051423
    IMEI spare to net: 3A 85 50 03 71 50 41 02
    IMEI SV to net: 33 85 50 03 71 50 41 12 F0
    Master Code: 0217154374
    Phone type: RM-258, Software version: 04.22, Language Pack: EG
    User code: 12345

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
    Saved INI not found, loading INI list...

    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Done!
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    HW version: 3000
    PCI version:
    UEM version: 1328
    UPP version: 12642
    RFIC version: 0500
    DSP version: GDSP_P06w45.v32
    LCD version: SUEZ
    PPM version: V 04.22
    31-08-07
    RM-258
    (c) Nokia
    EG
    BT MCM version: 2222-v101
    Content Pack version: Content: ad
    V 04.22
    31-08-07
    RM-258
    (c) Nokia

    Production serial number: XD2856895
    Product code: 0554088
    Module code: 0203319
    Basic production code: 0515047
    Flash code:
    Order number:
    Product specific data:
    Long production SN: 0
    ATO:
    Default SN type:
    IMEI plain: 358053017051423
    IMEI spare to net: 3A 85 50 03 71 50 41 02
    IMEI SV to net: 33 85 50 03 71 50 41 12 F0
    Master Code: 0217154374
    Phone type: RM-258, Software version: 04.22, Language Pack: EG
    User code: 12345

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
    Saved INI not found, loading INI list...

    No ini files found...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Done!
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
    PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,Russian,Ukrainian
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
    PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
    CNT Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.image_ej
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Languages in ppm: English,Russian,Ukrainian
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\358053017051423_imei_backup_1328153.rpl
    Done!
    Backup imei OK!
    MCU: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x0822EC00
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.00
    MSID: 84AFCB2E65A06D61D86BFFD360
    MSID decoded: 2C40BAE90016F55CAA000000
    FAID: 17F23F13E9391052FF03A08F
    Operation took 0 minutes 12 seconds...
    Erasing...
    Found 2 interval(s) to erase
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01020000 - 01C3FFFF...
    Operation took 0 minutes 35 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 5 minutes 36 seconds...
    Restarting MCU...
    CNT: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.image_ej
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x0822EC00
    File is already converted to 128k page...
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.00
    MSID: 848CE7078A659F29F03ECABBB5
    MSID decoded: D26EBAF10016F55CAA000610
    FAID: E1EFB5EFD781703918AB3DAA
    Operation took 0 minutes 12 seconds...
    Erasing Content Pack...
    Found 2 interval(s) to erase
    Erasing area: 02000000 - 02DBFFFF...
    Erasing area: 02DC0000 - 02F9FFFF...
    Operation took 1 minutes 29 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 40 seconds...
    Restarting MCU...
    Operation took 0 minutes 1 seconds...
    Extracting Content Pack...
    Running: (c) Nokia File Server
    CNT Extract OK.
    Operation took 0 minutes 4 seconds...
    PPM: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x0822EC00
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.00
    MSID: 84BDBCBDCF642A4BA3CB1CFEC0
    MSID decoded: 3E4EBAE90016F55CAA000000
    FAID: 295151F906983B6747E9A9CF
    Operation took 0 minutes 12 seconds...
    Erasing PPM...
    Found 1 interval(s) to erase
    Erasing area: 01C40000 - 01FFFFFF...
    Operation took 0 minutes 11 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 20 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 11 minutes 39 seconds...

    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RM-258, Software version: 05.20
    IMEI: 358053017051423
    Product Code: 0554088
    Resetting PPC...
    Setting FULL FACTORY......Setting test mode...
    Setting FULL FACTORY...
    Operation took 0 minutes 4 seconds...
    Done!
    Done!
    Done!

  2. #2
    Senior Member Аватар для pseudo
    Регистрация
    02.07.2003
    Адрес
    Lvov - bye...Welcome to Trostyanec
    Сообщений
    841
    Спасибо
    82
    Благодарностей: 554 : 150
    Может он и новый ,но его уже ушатали разлоком (patch unlock)!
    Выход только пока один! MT-BOX!
    Ни джафом ,ни уфсом - ты его пока не поднимешь!

  3. #3
    Member
    Регистрация
    04.10.2005
    Адрес
    Россия
    Сообщений
    236
    Спасибо
    3
    Благодарностей: 45 : 10
    я не понял так сейчас что надо с ним сделать чтоб его восстановить???

  4. #4
    Senior Member
    Регистрация
    16.06.2004
    Адрес
    Minsk
    Сообщений
    1,120
    Спасибо
    83
    Благодарностей: 195 : 119
    Для начала МТ-бокс надо...

  5. #5
    Newbie Аватар для The barbarian
    Регистрация
    29.11.2005
    Адрес
    Буковина
    Сообщений
    454
    Спасибо
    43
    Благодарностей: 60 : 27
    Failed reading simlock data...
    Увалил вчера джафом принесли на рус 5,2 залил теперь контакт сервис! Подскажите как его вылечить с помощь МТ. приобрел только что. Спасибо. Хвост ейси2. Имей на месте.

  6. #6
    Member
    Регистрация
    14.05.2004
    Адрес
    MD
    Сообщений
    699
    Спасибо
    7
    Благодарностей: 101 : 79
    Сделай UNLOCK.

  7. #7
    Newbie Аватар для The barbarian
    Регистрация
    29.11.2005
    Адрес
    Буковина
    Сообщений
    454
    Спасибо
    43
    Благодарностей: 60 : 27
    логи нужны?

  8. #8
    Member
    Регистрация
    14.05.2004
    Адрес
    MD
    Сообщений
    699
    Спасибо
    7
    Благодарностей: 101 : 79
    Цитата Сообщение от The barbarian
    логи нужны?
    Для версии 5.20 нужны, но если хочешь без то нужно прошить версию по ниже и искать софт от МТ который делает "free" , на форуме есть тема о нем.

  9. Спасибо сказали:

    The barbarian (27.03.2008)

  10. #9
    Newbie Аватар для The barbarian
    Регистрация
    29.11.2005
    Адрес
    Буковина
    Сообщений
    454
    Спасибо
    43
    Благодарностей: 60 : 27
    Тему нашел, тел сделал!

  11. #10
    Member
    Регистрация
    04.10.2005
    Адрес
    Россия
    Сообщений
    236
    Спасибо
    3
    Благодарностей: 45 : 10
    Цитата Сообщение от The barbarian
    Тему нашел, тел сделал!
    мне тоже дай ссылку на эту тема

  12. #11
    Newbie Аватар для The barbarian
    Регистрация
    29.11.2005
    Адрес
    Буковина
    Сообщений
    454
    Спасибо
    43
    Благодарностей: 60 : 27
    Цитата Сообщение от dx15
    мне тоже дай ссылку на эту тема
    http://www.mobile-files.ru/forum/sho...hlight=2760+mt

Похожие темы

  1. 2760 RM-258 Contact service
    от Arhitektor198 в разделе Телефоны DCT4/WD2/TIKU
    Ответов: 5
    Последний ответ: 20.01.2010, 16:49
  2. 2760 Contact service
    от jamshed226 в разделе Nokia для новичков
    Ответов: 5
    Последний ответ: 27.04.2009, 13:49
  3. contact service 2760 rm-258
    от dikn70 в разделе Nokia для новичков
    Ответов: 16
    Последний ответ: 12.04.2009, 13:43
  4. 2760 Contact Service
    от Zoosman в разделе Телефоны DCT4/WD2/TIKU
    Ответов: 3
    Последний ответ: 22.09.2008, 10:02
  5. нокия 2760 Contact Service
    от asus53 в разделе Nokia для новичков
    Ответов: 2
    Последний ответ: 28.04.2008, 09:49

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru