2760 contact service

[dx15]

телефон новый, ещё не продавался, пытаюсь включить только появляется изображение и тел уходит в перегруз, ну как обычно бывает у 6300,6233 и им подобные, подумал прошивка решил прошить в результате получил:

Getting MCU ID

MCU ID: 0x3162
FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00000001 -> NOT USED Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.00
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.22
31-08-07
RM-258
(c) Nokia
HW version: 3000
PCI version:
UEM version: 1328
UPP version: 12642
RFIC version: 0500
DSP version: GDSP_P06w45.v32
LCD version: SUEZ
PPM version: V 04.22
31-08-07
RM-258
(c) Nokia
EG
BT MCM version: 2222-v101
Content Pack version: Content: ad
V 04.22
31-08-07
RM-258
(c) Nokia

Production serial number: XD2856895
Product code: 0554088
Module code: 0203319
Basic production code: 0515047
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358053017051423
IMEI spare to net: 3A 85 50 03 71 50 41 02
IMEI SV to net: 33 85 50 03 71 50 41 12 F0
Master Code: 0217154374
Phone type: RM-258, Software version: 04.22, Language Pack: EG
User code: 12345

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0554088

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
Setting test mode...
Resetting USER DATA...
Operation took 0 minutes 1 seconds...
Done!
Setting test mode...
Resetting LEAVE FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting SERVICE CENTER...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting UPGRADE SOFTWARE...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting PRODUCTION TUNE...
Operation took 0 minutes 0 seconds...
Done!
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.22
31-08-07
RM-258
(c) Nokia
HW version: 3000
PCI version:
UEM version: 1328
UPP version: 12642
RFIC version: 0500
DSP version: GDSP_P06w45.v32
LCD version: SUEZ
PPM version: V 04.22
31-08-07
RM-258
(c) Nokia
EG
BT MCM version: 2222-v101
Content Pack version: Content: ad
V 04.22
31-08-07
RM-258
(c) Nokia

Production serial number: XD2856895
Product code: 0554088
Module code: 0203319
Basic production code: 0515047
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358053017051423
IMEI spare to net: 3A 85 50 03 71 50 41 02
IMEI SV to net: 33 85 50 03 71 50 41 12 F0
Master Code: 0217154374
Phone type: RM-258, Software version: 04.22, Language Pack: EG
User code: 12345

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
Saved INI not found, loading INI list...

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.22
31-08-07
RM-258
(c) Nokia
HW version: 3000
PCI version:
UEM version: 1328
UPP version: 12642
RFIC version: 0500
DSP version: GDSP_P06w45.v32
LCD version: SUEZ
PPM version: V 04.22
31-08-07
RM-258
(c) Nokia
EG
BT MCM version: 2222-v101
Content Pack version: Content: ad
V 04.22
31-08-07
RM-258
(c) Nokia

Production serial number: XD2856895
Product code: 0554088
Module code: 0203319
Basic production code: 0515047
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 358053017051423
IMEI spare to net: 3A 85 50 03 71 50 41 02
IMEI SV to net: 33 85 50 03 71 50 41 12 F0
Master Code: 0217154374
Phone type: RM-258, Software version: 04.22, Language Pack: EG
User code: 12345

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file D:\Program Files\ODEON\JAF\JAF_RM-258.ini
Saved INI not found, loading INI list...

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Russian,Ukrainian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
PPM Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
CNT Flash file: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.image_ej
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Languages in ppm: English,Russian,Ukrainian
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
Building RPL backup file...
D:\Program Files\ODEON\JAF\ProgData\358053017051423_imei_backup_1328153.rpl
Done!
Backup imei OK!
MCU: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.mcusw
Booting phone...
MCU ID: 0x3162
BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x0822EC00
Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: a2
Loader is ready...
P-key nokia module version 01.00
MSID: 84AFCB2E65A06D61D86BFFD360
MSID decoded: 2C40BAE90016F55CAA000000
FAID: 17F23F13E9391052FF03A08F
Operation took 0 minutes 12 seconds...
Erasing...
Found 2 interval(s) to erase
Erasing area: 01000000 - 0101FFFF...
Erasing area: 01020000 - 01C3FFFF...
Operation took 0 minutes 35 seconds...
Writing...
Perm. Data Restore OK
Operation took 5 minutes 36 seconds...
Restarting MCU...
CNT: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.image_ej
Booting phone...
MCU ID: 0x3162
BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x0822EC00
File is already converted to 128k page...
Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: a2
Loader is ready...
P-key nokia module version 01.00
MSID: 848CE7078A659F29F03ECABBB5
MSID decoded: D26EBAF10016F55CAA000610
FAID: E1EFB5EFD781703918AB3DAA
Operation took 0 minutes 12 seconds...
Erasing Content Pack...
Found 2 interval(s) to erase
Erasing area: 02000000 - 02DBFFFF...
Erasing area: 02DC0000 - 02F9FFFF...
Operation took 1 minutes 29 seconds...
Writing...
Perm. Data Restore OK
Operation took 1 minutes 40 seconds...
Restarting MCU...
Operation took 0 minutes 1 seconds...
Extracting Content Pack...
Running: (c) Nokia File Server
CNT Extract OK.
Operation took 0 minutes 4 seconds...
PPM: D:\Program Files\Nokia\Phoenix\Products\rm-258\rm258__05.20.ppm_ej
Booting phone...
MCU ID: 0x3162
BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A8
Boot is ready...
FLASH ID0: 00EC2208 -> ST Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00EC2208 -> ST Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0x0822EC00
Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x7528; Loader chk: a2
Loader is ready...
P-key nokia module version 01.00
MSID: 84BDBCBDCF642A4BA3CB1CFEC0
MSID decoded: 3E4EBAE90016F55CAA000000
FAID: 295151F906983B6747E9A9CF
Operation took 0 minutes 12 seconds...
Erasing PPM...
Found 1 interval(s) to erase
Erasing area: 01C40000 - 01FFFFFF...
Operation took 0 minutes 11 seconds...
Writing...
Perm. Data Restore OK
Operation took 1 minutes 20 seconds...
Restarting MCU...
Flashing Done!
Operation took 11 minutes 39 seconds...

After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RM-258, Software version: 05.20
IMEI: 358053017051423
Product Code: 0554088
Resetting PPC...
Setting FULL FACTORY......Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!
Done!
Done!

[pseudo]

Может он и новый ,но его уже ушатали разлоком (patch unlock)!
Выход только пока один! MT-BOX!
Ни джафом ,ни уфсом - ты его пока не поднимешь!

[dx15]

я не понял так сейчас что надо с ним сделать чтоб его восстановить???

[Serg55]

Для начала МТ-бокс надо...

[The barbarian]

Failed reading simlock data...
Увалил вчера джафом принесли на рус 5,2 залил теперь контакт сервис! Подскажите как его вылечить с помощь МТ. приобрел только что. Спасибо. Хвост ейси2. Имей на месте.

[mihy]

Сделай UNLOCK.

[The barbarian]

логи нужны?

[mihy]

логи нужны?

Для версии 5.20 нужны, но если хочешь без то нужно прошить версию по ниже и искать софт от МТ который делает "free" , на форуме есть тема о нем.

[The barbarian]

Тему нашел, тел сделал!

[dx15]

Тему нашел, тел сделал!

мне тоже дай ссылку на эту тема

[The barbarian]

мне тоже дай ссылку на эту тема

http://www.mobile-files.ru/forum/sho...hlight=2760+mt