Changes made from version 4.06 to 4.12:
GPRS
Timer T3186 is reset when camping to the new cell starts.
Improvements to SI13 refresh on ext-BCCH.
Improvement to camping on PCCCH: now possible to camp on cell after PSI1 and PSI2 are received. Earlier PSI1, PSI2 and PSI3 were all needed.
RAC_ valid invalidated after every detach (local or procedure).
Improvement to MS functionality: in NW, which continuously rejects the TBF establishment by sending immediate assignment reject.
Improvement to cell reselection in case where C2 parameters are used for cell prioritisation.
When MS lost coverage and returns service in a new RA and network mode of operation is I, then RAU is performed with update type combined RA/LA updating. If RA is not changed then update type is combined RA/LA updating with IMSI.
Total PLMN search timer value is optimised for every used band combination.
Pending or suspended PLMN search is started if own SI search is ongoing during TBF release.
Improvement to SI search in case where SI13 is received with changed BCCH_CHANGE_MARK.
Improvement to cell reselection in case where reselection reason is abnormal cell reselection.
Attempt counter for unresponded attach request, detach request and routing area update request was increased after every request. Now attempt counter is increased after 5 requests.
Improvements to RAU procedure in case where NMO changes from NMO2 to NMO1.
Improvement in own SI search clearing when target cell reading is started in TBF mode.
Improvement in reception of too many erroneous PSI blocks.
Optimisation to 900->1800 cell reselection time.
Direct hopping improvement: The length of the reassembled block is correctly updated to the actual output block length field, which is used in decoding of the message.
Improvement in PFI value handling in Packet Resource Request.
Pending channel configuration optimised neighbour SYNC or PSW measurement during TBF causing long cell reselection time.
Improvements in Early Classmark sending in PCCCH.
Improvements in handling the rejection cause #15 "No suitable cells in LA".
Improvements in timing offset threshold for early SCH measurement in a PDTCH configuration. Now neighbour synchronisation is not missed in certain situations.
If network transmits a message with incorrect values in non-GPRS cell options IE, then non-GPRS cell options IE is marked as not being present in the message. Implementation changed to cope with incorrect message.
Not able to handle Immediate Assignment if it came in two parts (two-message assignment). Now two message assignments handled correctly.
Improvements in handling of the MPH_NEXT_CELL_REQ message in PCCCH cell.
Cell reselection not allowed to perform a barred cell during ongoing DL TBF.
Handling of the combined RAU accept during MM state "Receive RR Activation Response" improved.
Neighbour measurements are resumed after non-DRX->DRX (PCCCH).
When SMS character coded NITZ or flexible PLMN name had 7 spare bits in the last octet, then the name length was calculated 1 character too long. Therefore in display an extra '@' character was shown when name length was 7, 15, 23, 31 or any other (8 * n - 1) length.
TA update procedure changed. Latest sent TAI info is reused now as long as it is valid even if we get new values for the other direction. This change avoids gaps in the earlier procedure in receiving continuous TA blocks when taking the new TAI values in use.
When PCCCH is accessed RSSI values are changed so that reselection is triggered. After successful reselection to another cell auto PSI1 -procedure is completed correctly.
With several band combinations maximum PLMN search time is correctly set when e.g. next cell request received during suspended PLMN search.
The cell, where SI/PSI13 is received, is supposed to support GPRS. Earlier GPRS support was marked as true only if PBCCH description is present in the SI13.
Messaging
SMS stability improvement
Saving empty SMS to calendar improved
SMS headers improved
Other changes
Automatic keyguard timing improvement (Setting time to 5.28 is also possible)
Timed profile is also possible when clock is hidden.
Stopwatch improvement (change in German behaviour in when deleting lap times)
Voice commands improvement when memory is full
Radio improvement: renaming saved stations improved
Display text and icon improvements
Operator list updated
Changes made from version 4.05 to 4.06:
Improvement to SMS (In some case there were problems to switch on the phone after a picture was moved from "template" to "archive" folder)
Changes made from version 4.00 to 4.05:
Support for new type of flash device added
Improvement to Nokia WAP manager
Phonebook: in Hebrew language;
Viewing phonebook entry details
Calling from phonebook
Quick dial assignment - enter phonebook
Improvement in Hebrew language (incoming calls)
Label files updated with codes of variant and SWAP phones
Changes from 3.35 to to 4.00:
WAP improvements
Phone powered off, if reset occurred at certain stage of startup
Use of long USC2 strings in SMS messages improved
Intergation to Versit 4
Accept Hearder change for SyncML MIME type
New Logical text caused wrong softkey handling for WTAI MakeCall
Use Number feature did not work in ISA3 Call Server
Number 100 couldn't be displayed
Automatic restart improved
If two OTA ringing tones were sent after each other, the later was not received
Use number didn't work in picture messages
Use of "Reset wallet" code improved
Improvements to Call Counter
Single selection list showed only three lines
Softkey functionality improved
GPRS connections improved
Allow white space within URL parameter list to WMLS functions
Improvement in Arabic: Stopwatch timer did not use Arabic digit
Not all animated GIFs were shown
WTLS re-send timers (got from WTP) were too long
Digital Signature feature improved
EMCL-form filling with certain WML-formatting improved
Sorting Slovak/Slovene characters was incorrect when English was the selected language
Vcard version element handling improved
Improvements to OTA receiving
Reading/viewing state and volume key combination improved
If phone goes to reset loop, it does not power on anymore after certain amount of resets
Changes from 3.30 to to 3.35:
Call and network management: Call related service - USSD: Font of network reponse was too small
Phonebook: Improvements when browsing phonebook memory
Games: Minor game functionality improvements
Games: Changes to Query Panel font
Messaging: Cell broadcast improvement with GPRS Always online
General memory improvements (PPM)
Wakeup graphics implemented
Arabic UI support
To-Do list: Changes to Panel Font
To-Do: Memory full was displayed incorrectly
Rom-font used for displaying USSD command replies
