Показано с 1 по 4 из 4

Тема: проблемы после проливки чужого pm

  1. #1
    Member
    Регистрация
    04.10.2007
    Адрес
    казахстан
    Сообщений
    133
    Спасибо
    1
    Благодарностей: 0 : 0

    проблемы после проливки чужого pm

    принесли 6230 не видит нашу сеть.пролил чужой pm теперь включается доходит установки времени и выключается


    Getting MCU ID

    MCU ID: 0x1052
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 003900EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.01
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Reading...
    MCU SW version: V 05.50
    07-07-05
    RH-12
    GSM P1.1
    (c) NMP.
    HW version: 0600
    PCI version:
    UEM version: 288
    UPP version: 4178
    RFIC version: p
    10ff11ff0203
    DSP version: p
    B0435T_04w46
    LCD version: SEIKO
    PPM version: V 05.50
    07-07-05
    RH12_28_-
    GSM P1.1
    E
    ADSP SW version: MATRIX_04_w35_prod_w46
    Content Pack version: V 05.40\n18-04-05\nRH12_28_-\nGSM P1.1\n(c) NMP.
    Production serial number: KKH527820
    Product code: 0513093
    Module code: 0201879
    Basic production code: 0509076
    Flash code:
    Order number: 0000000
    Product specific data: 0000000
    Long production SN:
    ATO: z?121102003 10:37:06??????09??????????????????????
    Default SN type: z?121102003 10:37:06??????09??????????????????????
    IMEI plain: 352953004458133
    IMEI spare to net: 3A 25 59 03 40 54 18 03
    IMEI SV to net: 33 25 59 03 40 54 18 13 F7
    Master Code: 7602213314
    Phone type: RH-12, Software version: 05.50, Language Pack: E
    User code: 12345

    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

    Searching for saved ini...
    Checking for file D:\Program Files\ODEON\JAF\JAF_RH-12.ini
    Saved INI not found, loading INI list...
    Setting local mode...
    Reading product code...
    Product Code: 0513093

  2. #2
    Senior Member
    Регистрация
    13.07.2007
    Адрес
    Ташкент
    Сообщений
    817
    Спасибо
    2
    Благодарностей: 53 : 22
    лог полной прошивки дай !!

  3. #3
    Member
    Регистрация
    04.10.2007
    Адрес
    казахстан
    Сообщений
    133
    Спасибо
    1
    Благодарностей: 0 : 0
    Код:
    Getting MCU ID
    
    MCU ID: 0x1052
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 003900EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 
    Checking RAM for ALGO...
    Algo is ready...
    Checking FAID calculation...
    P-key nokia module version 01.01
    Done!
    Phone Restarted...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Switching to serial...
    Powering the phone...
    Failed! Aborting!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type: 
    FILES SET FOR FLASHING:
    MCU Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.500
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type: 
    FILES SET FOR FLASHING:
    MCU Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.500
    PPM Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.50e
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type: 
    FILES SET FOR FLASHING:
    MCU Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.500
    PPM Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.50e
    CNT Flash file: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.50.ucp_e
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.500
    Booting phone...
    MCU ID: 0x1052
    BOOT file: D:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 003900EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 
    Flash ID is 0x22F800EC
    Flash loader is D:\Program Files\ODEON\JAF\Flash\te_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x84A0; Loader chk: 38
    Loader is ready...
    P-key nokia module version 01.01
    MSID: 84DE1E0C425C792B57E15CB54C
    MSID decoded: B03FBAE90088D2B3A9000000
    FAID: 85D0509FC747EB702417FADA
    Operation took 0 minutes 16 seconds...
    Erasing...
    Found 4 interval(s) to erase
    Erasing area: 00000000 - 0000FFFF...
    Erasing area: 00010000 - 007FFFFF...
    Erasing area: 00800000 - 0093FFFF...
    Erasing area: 00B60000 - 00FEFFFF...
    Operation took 2 minutes 2 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 51 seconds...
    Restarting MCU...
    CNT: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.50.ucp_e
    Booting phone...
    MCU ID: 0x1052
    BOOT file: D:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 003900EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 
    Flash ID is 0x22F800EC
    Flash loader is D:\Program Files\ODEON\JAF\Flash\te_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x84A0; Loader chk: 38
    Loader is ready...
    P-key nokia module version 01.01
    MSID: 8414EFB69DA0EEAC21F9AB65A7
    MSID decoded: 3E4EBAE90088D2B3A9000000
    FAID: 3C241FCA1C6DF7396046377B
    Operation took 0 minutes 16 seconds...
    Erasing Content Pack...
    Found 1 interval(s) to erase
    Erasing area: 00940000 - 00B3FFFF...
    Operation took 0 minutes 18 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 9 seconds...
    Restarting MCU...
    Operation took 0 minutes 1 seconds...
    Extracting Content Pack...
    Running: (c) Nokia File Server
    CNT Extract OK.
    Operation took 0 minutes 14 seconds...
    PPM: E:\Прошивки\DCT4\lsd_rh-12_v5.50\rh12_28_11005.50e
    Booting phone...
    MCU ID: 0x1052
    BOOT file: D:\Program Files\ODEON\JAF\Flash\te_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x2398
    Boot is ready...
    FLASH ID0: 22F800EC <=> SAMSUNG (SEC) -> Type not in database Addr0: 0x00000000 - 0x00FFFFFF, SectorSize0: 10
    FLASH ID1: 003900EC <=> SAMSUNG (SEC) -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 9
    FLASH ID2: 00010000 <=> Flash -> not used Addr2: 0x04000000 - 0x04FFFFFF, SectorSize2: 0
    FLASH ID3: 00010000 <=> Flash -> not used Addr3: 0x06000000 - 0x06FFFFFF, SectorSize3: 0
    First 16 bytes: 00 00 00 00 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 
    Flash ID is 0x22F800EC
    Flash loader is D:\Program Files\ODEON\JAF\Flash\te_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x84A0; Loader chk: 38
    Loader is ready...
    P-key nokia module version 01.01
    MSID: 8414EFB69DA0EEAC21F9AB65A7
    MSID decoded: 3E4EBAE90088D2B3A9000000
    FAID: 3C241FCA1C6DF7396046377B
    Operation took 0 minutes 17 seconds...
    Erasing PPM...
    Found 1 interval(s) to erase
    Erasing area: 00940000 - 00B3FFFF...
    Operation took 0 minutes 17 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 0 minutes 12 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 5 minutes 40 seconds...
    
    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RH-12, Software version: 05.50
    IMEI: 352953004458133
    Product Code: 0513093
    Resetting PPC...
    Powering the phone...
    Unlocking...
    IMEI: 352953004458133
    ASIC: 6
    SW version: 05.50
    Checking locks...
    
    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN 
    
    Done!
    DCT4 unlock counter: 17
    Done!

  4. #4
    Member
    Регистрация
    04.10.2007
    Адрес
    казахстан
    Сообщений
    133
    Спасибо
    1
    Благодарностей: 0 : 0
    все запустил после проливки прошил и все пошло

Похожие темы

  1. E71-1 после проливки pm не работает камера
    от _Yurek_ в разделе Nokia для новичков
    Ответов: 10
    Последний ответ: 29.09.2011, 19:37
  2. Ах72 после проливки фулла не вкл
    от Stick2 в разделе BENQ-Siemens для новичков
    Ответов: 2
    Последний ответ: 02.07.2011, 00:58
  3. V3 R4515 помер после проливки NVM
    от zva13 в разделе Motorola аппаратный ремонт
    Ответов: 2
    Последний ответ: 25.07.2009, 19:25
  4. 6670 после проливки рм проблемы с сим.
    от aikon96 в разделе Nokia для новичков
    Ответов: 6
    Последний ответ: 18.10.2008, 17:32
  5. K790 проблемы после влития чужого GDFS
    от lechka в разделе SonyEricsson DB2020 и DB3150 Series
    Ответов: 10
    Последний ответ: 12.02.2008, 00:57

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru