Страница 1 из 2 1 2 ПоследняяПоследняя
Показано с 1 по 12 из 15

Тема: A assist letter from china

  1. #1
    Newbie
    Регистрация
    01.07.2004
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0

    A assist letter from china (c100)

    I had a “C108ZKWJ1(http://jtwww.com/chunhai/c/macj1finalbyft.rar)” software ,but it have some problem now , It can not write flash to the mobile phone .To settle the problem refer ,I use the “C100XEDA2” of “down(download.exe %1 /t:cx8 /c:0 C108ZKWJ1_1.bin:0x1000000 C108ZKWJ1_2.bin:0x2000000 /f:1000k_cs7.s37 /l )”, It can write flash ,but the phone can not open and reflect

    Please help me thank you


    Help me write “down”

  2. #2
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    If you want to use the FLASH from C100, that you necessary also to write EEPROM from C100.

  3. #3
    Newbie
    Регистрация
    01.07.2004
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0
    It can write flash ,but the phone can not open and reflect

  4. #4
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    1 variant:
    If you has written FLASH C100XEDA2, that necessary also to write EEPROM C100. Not С108.

    2 variant:
    Write Back FLASH C108ZKWJ1.

    C108ZKWJ1 + EEPROM C108.
    C100XEDA2 + EEPROM C100.

  5. #5
    Newbie
    Регистрация
    01.07.2004
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0
    I have a "E5(http://jtwww.com/chunhai/user/c/C18ZCWE5+(经典版).rar)" software that it accept Chinese ,but not wap and it`s always down and reset . What is the result .that I can only open the mobile with "E5" but failed with "C108ZKWJ1"

    How can I make "C108ZKWJ1" to write flash so that I can use

    I wondered if it is possible that I correct (down, download. cs0s37)parameter
    only IF yes ,how to do ? Hope your help ,Thank you
    Последний раз редактировалось sunyyy; 06.07.2004 в 05:35.

  6. #6
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    尊敬这:
    Вложения Вложения

  7. #7
    Newbie
    Регистрация
    01.07.2004
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0

    dervish

    Thank you very much for you help !!!!!!

    If have done flash initialize with program ft_af.exe, could I write flash with "C108ZKWJ1" ??

  8. #8
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    If cable is fault-free and connected correct, program a worker, but write Flash is not got, necessary to do initialization.

    I'm sorry, but at present I have no C108.

    Previously than begin something do, make ft_af.exe copies NVR and parameters of battery.

    I think that loader 1000k_cs7.s37 is used for flashchip in C108, but loader 1000k_cs0.s37 is used for flashchip in C100.

    1. Write briefly and exactly that you have
    2. Write briefly and exactly that You want to do
    3. Write briefly and exactly that you already did

    I try you to help

  9. #9
    Senior Member
    Регистрация
    22.09.2003
    Адрес
    Baltija
    Сообщений
    824
    Спасибо
    0
    Благодарностей: 7 : 5
    dervish

    I think that loader 1000k_cs7.s37 is used for flashchip in C108, but loader 1000k_cs0.s37 is used for flashchip in C100.
    You are right for 100%. Some time ago I try flash C100 with C108ZKWJ1_1.bin, after used right loader I did it! But phone not go in test mode, and ft_af.exe not work with him. Phone come to life only after right soft.......

  10. #10
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    In the event of, described sunyyy , C108 work only with C18ZCWE5 (no WAP), and does not work with C108ZKWJ1 (there is WAP).
    In analogy with other telephones (at present I have no C108), I intend that decision of this problem inheres in change of contents EEPROM.

    This pertains and towards C100, I think.

  11. #11
    Newbie
    Регистрация
    01.07.2004
    Сообщений
    7
    Спасибо
    0
    Благодарностей: 0 : 0
    After I write “zkwkj1” with “cs0.s37” . I could write in but I could not open and reflection . Yet write with “cs7.s37” it show (ERROR 2 : External RAM tesl failure)
    I have readen some dates . What says the “RAM” and “flash” of “c100” connect “cs0” pin . But “c108” connect “cs7” pin. The so that can pass 3 Grow the method solves problem.
    The first method (The hardware reforms method)
    Show according to the bottom diagram, In" c108" the yellow line in conjunction can write the " kj1", but link the red line can write the " c100"
    The second method
    Modification “cs7.s37” document

    The third method
    According to the data, the c100 ratio c108 is in need of a needle feet, since the 5 feets, Too is to says that the c100 can't distinguish analyse the address “10010” and “10011” differentiation. Modification “”KJ1.bin” can't drive the address that “c100” read , Then at modify the address be partial to move.

    But I can't

  12. #12
    Mega Member
    Регистрация
    07.07.2003
    Адрес
    Milky Way, Solar System, Land
    Сообщений
    1,450
    Спасибо
    83
    Благодарностей: 797 : 351
    You do a good job work.
    My congratulations.

Похожие темы

  1. Becker Traffic Assist Pro Ferrari 7929 установить карту Украины
    от romaz1985 в разделе Спутниковое/GPS оборудование
    Ответов: 0
    Последний ответ: 27.11.2011, 16:36
  2. China phone
    от bobomurod в разделе Китайские телефоны для новичков
    Ответов: 6
    Последний ответ: 15.12.2008, 22:11
  3. E51 China
    от vlad956 в разделе Китайские телефоны для новичков
    Ответов: 3
    Последний ответ: 24.08.2008, 11:57
  4. T190 China
    от Inc0gnit0 в разделе ODM Motorola
    Ответов: 3
    Последний ответ: 17.01.2004, 14:18

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru