INFINITI пререстал шить телефоны, хотя в остальном все нормально работает

[DimanG]

INFINITI пререстал шить телефоны, останавливая на 27 - 30%. Последние где-то 6 китайцев подряд не удалось зашить с руссификацией. Пробывал переустанавливаит (удалил все и поставил с нуля), ставил различные версии, очищал реестр, выставлял различные настройки. Все никак не помогает. Хотя формат, и фулл флеш считывает без ошибок:
Резет:
Do you want to continue ?
COM4 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: reset
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:64947A3
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.03A1964D.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E].rpl
identification#1 detection finished
device-id: 03A1964D
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN
ver. sw2: BR26_23.04, C197DD11
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]]...
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]_20080530-191144.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
formatting...
flash: 01227E22202200:29EA0000000000
Finalization Done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_03A1964D_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E_20080530-191306.B0X.bin
Finished, time used: 274 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Чтение:
COM4 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:64947A3
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.03A1964D.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E].rpl
identification#1 detection finished
device-id: 03A1964D
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN
ver. sw2: BR26_23.04, C197DD11
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]]...
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_flash[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]_20080530-193105.B0M.bin
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_03A1964D_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E_20080530-193212.B0X.bin
Finished, time used: 713 sec
Remove/Install battery now !

Запись
Loading file v.03...
editor_corrected_backup_flash[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]_20080530-193105.B0M.bin loaded
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN
ver. sw2: BR26_23.04, C197DD11
You have loaded file with security features enabled.
detecting languages...
Languages: En Cn Cn Ru Vn
COM4 selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:64947A3
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.03A1964D.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E].rpl
identification#1 detection finished
device-id: 03A1964D
identification#1 protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN
ver. sw2: BR26_23.04, C197DD11
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]]...
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN]_20080531-110741.B0E.bin
flash: 01227E22202200:29EA0000000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
security area#1 calculation...
done
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_03A1964D_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E_20080531-110806.B0X.bin
Area: Firmware
flash: 01227E22202200:29EA0000000000
Write: Firmware
error: no any expected answer
error: flash write error: 00400000:00002000
error: error# 000000FF
error: flash write error: 00400000:00002000
2E3B3B3B3B2E3B3B3B332E3B3B3B4B2E3B3B3B381A2EBB1A3B3B2EFFCF9FF8FA250438787F0000000000000000A2004200000000001100210002040402280000000000
detect device identification#2...
detection phase #1...
error: wrong answer: 0B
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Fail
file saved: D:\Program Files\InfinityBox\ChineseMiracle\backup_system_log_03A1964D_BR26_05C_PCB01_GPRS_MT6226_S01.BR26_23_04.BIN_EE22683E_20080531-110843.B0X.bin
Finished, time used: 251 sec
Remove/Install battery now !

В чем моя ошибка?

[habib301]

у меня в таком случае проблемы были с телефонами! 2 месяца верту кит лежал умерший при руссификации! оказалось дело в железе телефона

[Di4]

Затесть ка эту версию...

[DimanG]

при попытке прошить версией 1,59. Комп уходит в перегруз. Наверное придется винду переставить.

[DimanG]

у меня в таком случае проблемы были с телефонами! 2 месяца верту кит лежал умерший при руссификации! оказалось дело в железе телефона

но я не думаю что теория вероятности работает на 100%, 6 подряд телефонов

[Di4]

при попытке прошить версией 1,59. Комп уходит в перегруз. Наверное придется винду переставить.

попробуй для начала настроить порт....я думаю ребут из-за него(для проверки повесь на него другой бокс и запусти оболочку)...перебей дрова,и сразу после того как система найдёт устройство в настройках порта измени значение "Latency timer" на 4 msec(оптимально)....иногда 3 и 6 требуется...

[habib301]

удали скрытые ком порты которые обычно конфликтуют

[Derak]

при попытке прошить версией 1,59. Комп уходит в перегруз. Наверное придется винду переставить.

НЕ винду надо перестовлять а дрова под твой Uni...тоисть переставь дрова от каробки

[DimanG]

Сегодня попробывал заново поставить дрова на бокс результат не изменился

[Kot_Silvester]

БЫЛА ТАЖЕ ФИГНЯТ ПЕРЕЙДИ НА СКОРОСТЬ 460800 ПОЛЮБОМУ ПОМОЖЕТ ПОЛМЕСЯЦА МУЧАЛСЯ ВСЕ КИТАЙЦИ ОТВАЛИВАЛИСЬ ТЕПЕРЬВСЁ ОК

[habib301]

НЕ винду надо перестовлять а дрова под твой Uni...тоисть переставь дрова от каробки

thanks!!! все отлично заработало, раньше я всегда прошивал через ком порт unibox, теперь смело через инфинити