по словам клиента тел выключил проходя через проходную на зону и сдал, выходил больше не включился только моргает красный светодиод в районе кнопки
прошиваю не включается
что делать?
v0.914034/UNI
CARD SERIAL: 000******
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER).
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35851601****** CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
ALTERNATIVE SECURITY BYPASS ONLY SUPPORTED ON DCU60 !
Elapsed: 11 secs.
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35851601****** CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing C:\SETOOL\k550\cid52 r3b\R8BA024_1250669_GENERIC_LI.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing C:\SETOOL\k550\cid52 r3b\R8BA024_FS_RUSSIA_LI_RED_CID52.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:3220
Will flash 161 blocks...
SSW loading returns:0
writing C:\SETOOL\k550\cid52 r3b\R3B025_CXC1250593_FOTA_UA_MARIKA_NAND_RED_CID52.ssw
CURRENT FLASH FILE CID:52
SSW uses complete hash, hash len is:80
Will flash 4 blocks...
SSW loading returns:0
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
Loader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed: 573 secs.
