В чем может быть дело?
Адреса все время разные скорость чтения slowest
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x000F4000, retry...
Nokia N95 моноблок под крышкой N959+
Определился Xintelom так:
spy and analyse define ->-----------------*................_
MTKchips connect to phone.
MTK CPU :6225
spy define success!RXD:1, TXD:3
please return 'set define' page,press 'set define' button.
-------------------
define set success!RXD:1 TXD:3
>>hint:run outside soft , please remove datacable and vccout clip.
Лог с ошибкой:
COM3 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
enhanced security fix enabled
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:EF03:0006
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd PL127J D 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd PL127J D 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
slowest
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd PL127J D 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:18E59F00000000
flash: Amd PL127J D 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: BENRUI25_GEMINI_PCB01_GPRS_MT6225_S00.BR253_V91_06.BIN
ver. sw2: BR253_V91.06, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:18E59F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[BENRUI25_GEMINI_PCB01_GPRS_MT6225_S00.BR253_V91_06.BIN]]...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
warning: wrong cs at 0x001DF000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
error: wrong answer: 4C
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
operation canceled by user
Finished, time used: 599 sec
Remove/Install battery now !
Ответить с цитированием
