n76 после прошивки не вкл

[clayer]

вот лог

JAF version 1.98.48
Detected PKEY: 9000
Card life counter: 99.56%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Estonian,Latvian,Lithuanian
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Estonian,Latvian,Lithuanian
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Estonian,Latvian,Lithuanian
Backing up CRT...
Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Preparing for downgrade...
Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Failed to prepare for downgrade...
Searching for phone...Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Found
Reading SW version...Error reading ape ver!
Searching for phone...Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Found
Reading SW version...Error reading ape ver!
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Found
Starting DEAD USB phone flashing...
Using 006.044.048
Elf2flash 07.19.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting................Phone prepared OK!
Waiting for the phone to boot...
Searching phone...Found!
Status byte: 06
Phone is in flash mode...
CMT blocks: 589, APE blocks: 0
Erasing cmt...
Send CMT CFG...

Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000
Erasing cmt zone 00B80000 - 07B3FFFF ... Erase result: 0000
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04...
Erasing cmt zone 03A40000 - 0537FFFF ... Erase result: 0000
Writing cmt...
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04...
Sending CMT HASH for SOS+ROFX
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
Phone not found...
Done!
Changing mode...Done!
Changing mode...Done!

No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00
PPM Flash file: D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Estonian,Latvian,Lithuanian
PRESS POWER ON THE PHONE NOW!!!
Searching for phone...Detected P-KEY: 90006126
P-key nokia module version 01.02
Init usb communication...
Found
Starting DEAD USB phone flashing...
Using 006.044.048
Elf2flash 07.19.000
CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting................Phone prepared OK!
Waiting for the phone to boot...
Searching phone...Found!
Status byte: 06
Phone is in flash mode...
CMT blocks: 589, APE blocks: 0
Erasing cmt...
Send CMT CFG...

Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00...
Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
Erasing cmt zone 00083400 - 0087FFFF ... Erase result: 0000
Erasing cmt zone 00B80000 - 07B3FFFF ... Erase result: 0000
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04...
Erasing cmt zone 03A40000 - 0537FFFF ... Erase result: 0000
Writing cmt...
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing D:\Phoenix\Products\RM-135\RM135_31.0.014_prd_0401.V04...
Sending CMT HASH for SOS+ROFX
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...

Phone not found...

[natel]

Не ты один попал на такую бяку!А что хоть с телом то было?
У меня блю туз барахлил!

[clayer]

язык надо было поставить, а вообще прошил уфсом и отдал уже

[victorgo2000us]

ну и джафом можно, токо ф-бас нужен

[uo5oq]

И по USB отлично программируется SW в N76 , если понимать что делаешь , а не "шить" ! :D

[remontnik]

И по USB отлично программируется SW в N76 , если понимать что делаешь , а не "шить" ! :D

пролей свет в темноту, дружище, в чем закавыка!

[AVP83]

пролей свет в темноту, дружище, в чем закавыка!

в старых версиях сюиты мне помогало обновление ФИА-файлов. С выходом версий 1.98.47 и старше проблем с прошивкой N76 больше не возникало.

[Alva]

n76 очень чувствительно к драйверам, которые установлены. На чистой машинке флеширование проходит нормально