тело не битое , не мочёное .
при попытке шить :Феникс недошивает , а с JAFом не коннектится ( сразу пишет бут эррор). Кабель на Jaf нормальный , раньше шил на UFS ( UFS сейчас чегой-то не запускается
)
вот лог с феникса
Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Current mode of Programming Device: Normal
Preparing for file upload...
File uploading... 0%
File uploading... 2%
File uploading... 5%
File uploading... 8%
File uploading... 10%
File uploading... 13%
File uploading... 16%
File uploading... 18%
File uploading... 21%
File uploading... 24%
File uploading... 26%
File uploading... 29%
File uploading... 32%
File uploading... 35%
File uploading... 37%
File uploading... 40%
File uploading... 43%
File uploading... 45%
File uploading... 48%
File uploading... 51%
File uploading... 53%
File uploading... 56%
File uploading... 59%
File uploading... 61%
File uploading... 64%
File uploading... 67%
File uploading... 69%
File uploading... 72%
File uploading... 75%
File uploading... 78%
File uploading... 80%
File uploading... 83%
File uploading... 86%
File uploading... 88%
File uploading... 91%
File uploading... 94%
File uploading... 96%
File uploading... 99%
File uploading... 100%
File uploaded
Finishing file upload... 0%
File upload finished 100%
Phone programming
Smart Card's PIN code set succesfully
Phone's McuId is: 2292
Start Procedure done
Next algorithm code download
Maximum # of flash devices: 2
Flash device #0 address byte MSB: 01
Flash device #0 Manucode: 0001 and DeviceId 327e
Flash device #0 Extended DeviceId: 0043
Flash device #0 Revision: 7221
Flash device #0 Sector size: 131072
Flash device #1 address byte MSB: 02
Flash device #1 Manucode: 0000 and DeviceId 0001
Flash device #1 Extended DeviceId: 0000
Flash device #1 Revision: 0000
Flash device #1 Sector size: unknown
Flash Chksum: 37
Algorithm code downloaded
Next target erasing
Maximum time for Target flash erasing : 600s and programming 3000s
Using timeout value: 3600s
Target erasing completed
Next target erasing
Elapsed time: 14s
Elapsed time: 24s
Elapsed time: 34s
Elapsed time: 44s
Target erasing completed
Next target erasing
Target erasing completed
Next target erasing
Target erasing completed
Next target erasing
Target erasing completed
Next target programming
Elapsed time: 66s
Target programming completed
Next Target disconnect
MCM HW version is not asked from the phone
File programmed successfully!
Time taken to erase 56s and program 13s. Total time 69 seconds.
Making delay between files for 8000 ms
Flashing phone
Preparing for file upload...
File uploading... 0%
File uploading... 2%
File uploading... 5%
File uploading... 7%
File uploading... 10%
File uploading... 13%
File uploading... 15%
File uploading... 18%
File uploading... 20%
File uploading... 23%
File uploading... 26%
File uploading... 28%
File uploading... 31%
File uploading... 33%
File uploading... 36%
File uploading... 38%
File uploading... 41%
File uploading... 44%
File uploading... 46%
File uploading... 49%
File uploading... 51%
File uploading... 54%
File uploading... 57%
File uploading... 59%
File uploading... 62%
File uploading... 64%
File uploading... 67%
File uploading... 70%
File uploading... 72%
File uploading... 75%
File uploading... 77%
File uploading... 80%
File uploading... 83%
File uploading... 85%
File uploading... 88%
File uploading... 90%
File uploading... 93%
File uploading... 96%
File uploading... 98%
File uploading... 100%
File uploaded
Finishing file upload... 0%
File upload finished 100%
Phone programming
Smart Card's PIN code set succesfully
Phone's McuId is: 2292
Start Procedure done
Next algorithm code download
Maximum # of flash devices: 2
Flash device #0 address byte MSB: 01
Flash device #0 Manucode: 0001 and DeviceId 327e
Flash device #0 Extended DeviceId: 0043
Flash device #0 Revision: 7221
Flash device #0 Sector size: 131072
Flash device #1 address byte MSB: 02
Flash device #1 Manucode: 0000 and DeviceId 0001
Flash device #1 Extended DeviceId: 0000
Flash device #1 Revision: 0000
Flash device #1 Sector size: unknown
Flash Chksum: 37
Algorithm code downloaded
Next target erasing
Maximum time for Target flash erasing : 600s and programming 3100s
Using timeout value: 3700s
Target erasing completed
Next target erasing
Elapsed time: 14s
Elapsed time: 24s
Elapsed time: 34s
Target erasing completed
Next target erasing
Target erasing completed
Next target programming
Elapsed time: 45s
Target programming completed
Next Target disconnect
MCM HW version is not asked from the phone
Phone left in flash mode
File programmed successfully!
Time taken to erase 35s and program 12s. Total time 47 seconds.
Flashing phone
Preparing for file upload...
File uploading... 0%
File uploading... 37%
File uploading... 75%
File uploading... 100%
File uploaded
Finishing file upload... 0%
File upload finished 100%
Phone programming
Smart Card's PIN code set succesfully
Algorithm code downloaded
Next target erasing
Maximum time for Target flash erasing : 600s and programming 110s
Using timeout value: 710s
Target erasing completed
Next target erasing
Target erasing completed
Next target programming
Target programming completed
Next Target disconnect
MCM HW version is not asked from the phone
File programmed successfully!
Time taken to erase 2s and program 2s. Total time 4 seconds.
Phone flashing completed. Waiting for phone to boot up
Bootup did not succeeded, retrying in finalize phase...
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
Verifying communication to product (before flash finalizing)
Failed to verfy communication to product
All operations completed
Product flashing failed.
Уже несколько таких тлф
шил V5_06
УВАЖАЕМЫЕ КОЛЛЕГИ !
помогите плиз