У меня такое было:
Код:
==== log opened: [22.07.2008 10:37:14] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] v2.51
S/N: ххххххх
Wait...
Device: Autodetect 6205-6227 NOR
Done
COM3 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read eeprom
Boot...
Press and HOLD Power button now !
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
error: boot initialization step-2 failed: A0
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:18A2:54BA
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: ACEA80F098E59F:ACEA8000000000
flash: ACEA80F098E59F:ACEA8000000000
number of flash chip/regions detected: 00/01
Unknown or damaged flash chip, operation aborted.
Fault reasons:
1. damaged flash chip: replace or resolder/reball flash chip
2. damaged hardware: check hardware, water inside etc.
3. unknown hardware: set "Advanced chip detection method" box [un-checked] and try again
4. wrong model selection, try 'NAND' selection
Initialize Fail
Finished, time used: 125 sec
Remove/Install battery now !
Хватило просто прогрева флешки,прошивать не пришлось.