6300 не шьется

[yurokSZR]

принесли 6300 с жалобой что пропали все контакты
решил прошить кабель 5пин
начал шить джафом 1,98,57
эрейз он нормально сделал... зеленая полоска пробежала один раз :)
теперь только бесконечно бутится с постоянным еррором

JAF version 1.98.57
Detected PKEY: *******
Card life counter: 26.18%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30107
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Backing up CRT data...
Setting FLASH MODE
Error sync the phone...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...
Error sync the phone...
Booting phone...
Error sync the phone...
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 13B0000C90277056EAD4F3558CFC1DA83B4F4515
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00410001 <=> SPANSION -> Type not in database
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Done!
Restarting phone...Done!
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
Error getting public keys! Flash chip maybe damaged!
Try manual mode flash.
Error loading cmt loader...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 13B0000C90277056EAD4F3558CFC1DA83B4F4515
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00410001 <=> SPANSION -> Type not in database
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 7 seconds...
Sending CRT data...
No convertion block detected or file already converted.
Erasing...
Operation took 0 minutes 8 seconds...
Writing...
Stage 1
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
Sending CMT PUB KEYS...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
CMD ID: 0x54
Error resetting phone...
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 13B0000C90277056EAD4F3558CFC1DA83B4F4515
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\rap3gv3_2nd.fg
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00410001 <=> SPANSION -> Type not in database
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\RAP3Gv3_algo.fg
Loader version: 01.21.01 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 21 seconds...
Sending CRT data...
Stage 1
CMD ID: 0x54
Error resetting phone...
Booting phone...

и так бесконечно...
подскажите пожалуйста где копать?
Напрягает немного фраза выделенная жирным в логе...

[Serlucifer]

ета фраза есть у всех. проблема не в ней, а в кабеля. для того чтобы шить джафом ВВ5 нужен 7 пиновый кабель. на форуме выкладывали схему.

[Anik]

попробуй через usb

[faderaway]

5 пин JaF'ом нельзя только 7 пин.
Пробуй UFS+HWK 5 пин, если не потребует Dual Line (здесь только 7 пин кабло)

[yurokSZR]

пробовал и юфсом... он даже шиться не начинает...
хотя до этого 5пин кабелем и джафом шилась не одна модель
лог юфса

JAF version 1.98.57
Detected PKEY: *******
Card life counter: 23.93%
P-key nokia module version 01.02
Detected version: 01.B0, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Fast phone flashing selected.
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Backing up CRT data...
Setting FLASH MODE
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Reading CMT NPC certificate...
NPC crt not available...
Reading CMT VARIANT certificate...
VARIANT CRT not available...
Reading CMT CCC certificate...
CCC not available...
Reading CMT HWC certificate...
HWC not available...
Failed to backup CRT...
Backing up SIMLOCK data...
Setting local mode...
Failed! Aborting!
Failed to backup LCK...
Manual mode selected, version can't be checked!
Booting phone...

CMT Boot Data:
Asic ID: 000000010000022600010006010C192101001101
Asic Mode ID: 00
Asic EM ID: 00000353
Asic Public ID: 13B0000C90277056EAD4F3558CFC1DA83B4F4515
HASH: BAF3A9C3DBFA8454937DB77F2B8852B100000000
ROM ID: 191EC665DFAAF68F
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\UFS\rap3gv3_2nd.fg
Loader version: 01.10.02 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00410001 <=> SPANSION -> Type not in database
CMT Flash Data: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT Loader: C:\Program Files\ODEON\JAF\Flash\UFS\RAP3Gv3_algo_fps8.fg
Loader version: 01.0C.05 -> Revision: 0000
Patching CMT loader step1...
Patching CMT loader step3...
CMT Loader Ready
Operation took 0 minutes 8 seconds...
Sending CRT data...
Error in RD cmd...
Error preparing flashing...

[Anik]

попробуй dead usb поможет 100%

[yurokSZR]

с галкой "dead usb"

Starting DEAD USB phone flashing...
Using 06.02.002
Elf2flash 02.33.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...............................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching phone...Found!
Phone failed to boot in flash mode CMT...

[lladium]

переставь на кабеле vpp---rx2 а потом хоть джаф хоть уфс зашейся.
уфс тоже дуал лайн требует.

[yurokSZR]

пробовал двумя кабелями 3500 и 6300 обоими одинаково :(
млин до этого то все работало....
спасибо за советы... попробую замутить...потом отпишусь ;)