K770 и empty fill

[Alva]

поставили чистую флеш в K770, выбираю cid52 во вкладке empty fill и нажимаю recovery, в итоге имеем следующее:
v0.914039/UNI
CARD SERIAL: 000
oaded 51 flash descriptors
RECOVERY MODE STARTED
Open COM port OK
REC:070703 1229 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3N
can't open file "frec\marikabrowncid52.bin"
Recovery failed. Phone dead.
Elapsed: 2 secs.

[baton00]

рекувери ставь сид 49
go to empty tab
2. select any db2020 model
3. select cid49 (that is REQUIRED)
4. press recover
5. if board is totally empty (new flash chip), select needed gdfs_in_ssw_format
6. select respective EROM (better use k610_erom_cnv_brown2red.cry - works for any phone)
7. fill IMEI number, check WRITE OTP (it can be done only once, be careful)
8. press flash
In MISC (SEMC tab) load DB2020_CID49_51_to_CID52.txt file (inside scripts folder), check USE SERVER and press WRITE SCRIPT. Phone will be CID52. Flash it and customize phone