Показано с 1 по 8 из 8

Тема: 2680s возможно ли прошить Easy кабелем?

  1. #1
    Mega Member Аватар для magik666
    Регистрация
    22.06.2007
    Адрес
    Винница
    Сообщений
    2,297
    Спасибо
    727
    Благодарностей: 391 : 193
    Блог
    1

    2680s возможно ли прошить Easy кабелем?

    Если можно, дайте инструкцию.Так как после заливки MCU Выдает ошибку соединения с телефоном...
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    Заранее спасибо.

  2. #2
    Mega Member Аватар для magik666
    Регистрация
    22.06.2007
    Адрес
    Винница
    Сообщений
    2,297
    Спасибо
    727
    Благодарностей: 391 : 193
    Блог
    1
    JAF version 1.98.60
    Detected PKEY: 90011056
    Card life counter: 63.02%
    P-key nokia module version 01.02
    Detected JAF INTERFACE version: 01.B0, Driver version: 40000, Library version: 30112
    JAF DCT4/BB5 LOADERS DIR: D:\Program Files\ODEON\JAF\Flash\
    JAF DCT4/BB5 PRODUCT DIR: D:\Program Files\Nokia\Phoenix\Products\
    JAF USB LOADERS DIR: D:\Program Files\ODEON\JAF\FlashUSB\
    JAF DCT3/DCTL LOADERS DIR: D:\Program Files\ODEON\JAF\Flash3\
    USB Cable Driver version: 7.0.2.0
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    PPM Flash file: NONE
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    PPM Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.ppm_el
    CNT Flash file: NONE
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    PPM Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.ppm_el
    CNT Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_171971.rpl
    Done!
    Backup imei OK!
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
    Flash ID is 0x7E310100
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Loader size is 0x78C0; Loader chk: ba
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A2CA30DB93C9CE5FCC72B516
    MSID decoded: 2C40BAE900CE16AFAA000000
    FAID: F60CE3EFC34331C22471E504
    Operation took 0 minutes 17 seconds...
    Erasing...
    Found 2 interval(s) to erase
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01020000 - 01CFFFFF...
    Operation took 0 minutes 41 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 3 minutes 24 seconds...
    Restarting MCU...
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    MCU ID: 0xFFFF
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Failed! Aborting!
    Failed to backup imei...
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    Phone didn't answer with TX line high after power on!
    Causes:
    1. Phone don't power on -> Check cable
    2. TX pin from phone don't make contact -> Check cable
    3. UPP damaged -> change UPP
    MCU ID: 0xAAAA
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.ppm_el
    CNT Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173071.rpl
    Done!
    Backup imei OK!
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    Phone didn't answer with TX line low after UEM reset!
    Causes:
    1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
    2. UEM damaged -> replace uem.
    MCU ID: 0xDDDD
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173171.rpl
    Done!
    Backup imei OK!
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    Phone didn't answer with TX line low after UEM reset!
    Causes:
    1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
    2. UEM damaged -> replace uem.
    MCU ID: 0xDDDD
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Failed! Aborting!
    Failed to backup imei...
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    Phone didn't answer with TX line low after UEM reset!
    Causes:
    1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
    2. UEM damaged -> replace uem.
    MCU ID: 0xDDDD
    This MCU ID is not supported in chosen flash file...
    Error booting phone...
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.ppm_el
    CNT Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173271.rpl
    Done!
    Backup imei OK!
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    Phone didn't answer with TX line low after UEM reset!
    Causes:
    1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
    2. UEM damaged -> replace uem.
    MCU ID: 0xDDDD
    Cannot find boot file...
    Error booting phone...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    PPM Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.ppm_el
    CNT Flash file: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173371.rpl
    Done!
    Backup imei OK!
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    Phone didn't answer with TX line low after UEM reset!
    Causes:
    1. put a 27-33 pico capacitor in connector b/w mbus-gnd.
    2. UEM damaged -> replace uem.
    MCU ID: 0xDDDD
    Cannot find boot file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173471.rpl
    Done!
    Backup imei OK!
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
    Flash ID is 0x7E310100
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Loader size is 0x78C0; Loader chk: ba
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A2CA30DB93C9CE5FCC72B516
    MSID decoded: 2C40BAE900CE16AFAA000000
    FAID: F60CE3EFC34331C22471E504
    Operation took 0 minutes 19 seconds...
    Erasing...
    Operation took 0 minutes 0 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 47 seconds...
    Restarting MCU...
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    MCU ID: 0xFFFF
    Cannot find boot file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_173871.rpl
    Done!
    Backup imei OK!
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
    Flash ID is 0x7E310100
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Loader size is 0x78C0; Loader chk: ba
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A2CA30DB93C9CE5FCC72B516
    MSID decoded: 2C40BAE900CE16AFAA000000
    FAID: F60CE3EFC34331C22471E504
    Operation took 0 minutes 12 seconds...
    Erasing...
    Operation took 0 minutes 0 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 31 seconds...
    Restarting MCU...
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    MCU ID: 0xFFFF
    Cannot find boot file...
    Error booting phone...
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    D:\Program Files\ODEON\JAF\ProgData\356874021717481_imei_backup_174171.rpl
    Done!
    Backup imei OK!
    MCU: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: D:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
    Flash ID is 0x7E310100
    Flash loader is D:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.4C.00 -> Revision: 0007
    Loader size is 0x78C0; Loader chk: ba
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A2CA30DB93C9CE5FCC72B516
    MSID decoded: 2C40BAE900CE16AFAA000000
    FAID: F60CE3EFC34331C22471E504
    Operation took 0 minutes 17 seconds...
    Erasing...
    Operation took 0 minutes 0 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 18 seconds...
    Restarting MCU...
    CNT: D:\Documents and Settings\Тимоха\Рабочий стол\lsd_rm-392_v4.56\rm392__04.56.image_el
    Booting phone...
    MCU ID: 0xFFFF
    Cannot find boot file...
    Error booting phone...

  3. #3
    Mega Member Аватар для magik666
    Регистрация
    22.06.2007
    Адрес
    Винница
    Сообщений
    2,297
    Спасибо
    727
    Благодарностей: 391 : 193
    Блог
    1
    Победил...У меня была изначально залита последняя версия ПО тела, а так как контента она не пролила, то следственно не хотела заливаться версия пониже а именно 4.56. Зделел ерейз - залил 4.56

  4. #4
    Mega Member
    Регистрация
    28.05.2006
    Адрес
    ukrainе
    Сообщений
    1,488
    Спасибо
    175
    Благодарностей: 26 : 18
    А анлок джафом ты пробовал сделать 2680s?Нужно отлочить и прошить, ДЖАФ снимает код сети или нет?

  5. #5
    Mega Member Аватар для baton00
    Регистрация
    28.10.2003
    Адрес
    ukraine
    Сообщений
    1,904
    Спасибо
    231
    Благодарностей: 597 : 328
    Цитата Сообщение от vmas40 Посмотреть сообщение
    А анлок джафом ты пробовал сделать 2680s?Нужно отлочить и прошить, ДЖАФ снимает код сети или нет?
    снимает . делал анлок версии 4.91 , 5.28 джаф не осилил , хотя в 62 версии джафа думаю это пофиксили . делал изи кабелем

  6. #6
    Senior Member
    Регистрация
    13.07.2007
    Адрес
    Ташкент
    Сообщений
    817
    Спасибо
    2
    Благодарностей: 53 : 22
    Цитата Сообщение от baton00 Посмотреть сообщение
    снимает . делал анлок версии 4.91 , 5.28 джаф не осилил , хотя в 62 версии джафа думаю это пофиксили . делал изи кабелем
    lol

  7. #7
    Member
    Регистрация
    20.06.2007
    Адрес
    United Masters
    Сообщений
    232
    Спасибо
    19
    Благодарностей: 33 : 9
    Цитата Сообщение от baton00 Посмотреть сообщение
    снимает . делал анлок версии 4.91 , 5.28 джаф не осилил , хотя в 62 версии джафа думаю это пофиксили . делал изи кабелем

    Нет не пофиксили, даже с новыми ини файлами неполучается

  8. #8
    Mega Member
    Регистрация
    10.05.2008
    Сообщений
    1,827
    Спасибо
    425
    Благодарностей: 169 : 92
    Вообще DCT-4+почему-то имеют свойство не дошиваться до конца,а именно не заливается контент!

Похожие темы

  1. 2680S не могу прошить
    от duda26 в разделе Nokia аппаратный ремонт
    Ответов: 4
    Последний ответ: 28.01.2011, 14:58
  2. nokia 2680s-2 помогите прошить
    от Levonjan в разделе Nokia для новичков
    Ответов: 8
    Последний ответ: 25.05.2010, 11:50
  3. помогите с easy кабелем
    от sevara2 в разделе Nokia аппаратный ремонт
    Ответов: 12
    Последний ответ: 23.06.2009, 18:52
  4. Возможно ли кабелем USB шить сименс быстрее?
    от tinich в разделе Остальное оборудование
    Ответов: 3
    Последний ответ: 22.12.2004, 13:09

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru