вот дебаг-лог:
SEMCSEC Secure Bootstrap "1200-4341 SEMCBOOT R6A008" (Aug 2 2007 21:19:15) [A]
DB3150 P2B/R2A-Volume CC 0200 RED CID52 35893601001823 PAF1 (Locked) 64MB
Hdr CID52 BLACK RED BROWN BLUE OK - Hash OK
App: TA @ 0x80020000 (7*128kB)
App: SEMCBOOT Config: 5 byte(s) [Keymap override with 3 keys: 0x13 0x20 0x33]
App: Live FOTA/SIMLock root certificates selected
App: Keys detected:
App: FlaFla is SET
App: SEMC SIMLock check passed
SERVICE MODE
Not entering soft service (service pin asserted)
Scanning 0x80000000-0x87ffffff .OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
Scanned 2516kB
Loading ver 0x4815e824
Hdr CID52 RED BROWN BLUE OK - Hash OK
OK
PCORE: Version 4.13
PCORE: Build 2008-04-28 17:07 CRH1069256 R1B017 PCORE_INC_HEAP (IAR-420)
PCORE: CPU is ARM 926, architecture ARMv5TEJ (0x6), revision 5
PCORE: Inst Cache size is 32 Kb, 4-way, 32 bytes/line.
PCORE: Data Cache size is 16 Kb, 4-way, 32 bytes/line.
PCORE: CXC mapping area 0x10000000-0x1FFFFFFF
PCORE: CXC entry point 0x10000000
PCORE: ACC entry point 0x48000000
PCORE: Reserved RAM 0x28B00000-0x2A1BFFFF
PCORE: MALL heap 0x28BF0000-0x2A1BFFFF (22336 KB)
PCORE: MALL virtual memory area 0x50000000-0x5FFFFFFF
PCORE: Public heap 0x50000000-0x583FFFFF
PCORE: Protected heap 0x58400000-0x5E2FFFFF
PCORE: Private heap 0x5E300000-0x63AFFFFF
PCORE: Enabling the data cache
PCORE: Initializing the MMU translation table
PCORE: Write protecting RAM segments
PoD: Initializing the page cache
PoD: Probing for static page cache @ [0x2A600000-0x2C000000]
PoD: Found 26624 pages of static page cache
PCORE: Installing abort handlers
PCORE: Mounting the file system
FSFLASH: Mounting logical flash device 0
FSFLASH: Probing for NOR-flash @ 0x60000000
FSFLASH: NOR Flash device not present
FSFLASH: Probing for NAND-flash @ 0x9F800000
FSFLASH: NAND Flash device @ [0x080000000-0x087FFFFFF] 131072 Kb
FSFLASH: Vendor (0x20): ST
FSFLASH: Device: NAND01GR3B (0x00A1)
FSFLASH: Unique Device Number: 3715363139112111C8EAC9CEC6EEDEEE
FSFLASH: Page size: 2048 bytes
FSFLASH: Write Buffer Size: 0 bytes
FSFLASH: Burst Mode: OFF
FSFLASH: Copy back: OFF
FSFLASH: Random page ouput: OFF
FSFLASH: Cache program: OFF
FSFLASH: Scanning for config block in [0x080000000-0x087FFFFFF] found it @ 0x080221000
FSFLASH: Flash segment 0:0 located @ [0x080100000-0x08351FFFF] (53376 Kb)
FSFLASH: Flash type: NAND
FSFLASH: Block size: 4096
FSFLASH: Logical erase size: 128 Kb
FSFLASH: Real block cache enabled
FSFLASH: Check
FSFLASH: Stage 1
FSFLASH: Scanning segment 0:0
FSFLASH: Stage 2
FSFLASH: Stage 3
FSFLASH: Found mount block @ 0x082769000 (linear 0x0828A4480)
FSFLASH: Highest legal block number is 12415
FSFLASH: Stage 4
FSFLASH: CLEAN blocks 1215 (1215)
FSFLASH: MIN CLEAN blocks 64
FSFLASH: DIRTY blocks 1252 (0 BAD)
FSFLASH: State 5 skipped
FSFLASH: Stage 6
FSFLASH: Stage 7
FSFLASH: Stage 8
FSFLASH: Check done
FSFLASH: Flash Device:
FSFLASH: TOTAL number of blocks: 13344
FSFLASH: AVAILABLE blocks: 12416
FSFLASH: MAX logical block nbr: 12415
FSFLASH: COMMITTED blocks: 10863
FSFLASH: FREE blocks: 1553
FSFLASH: DIRTY blocks: 1253 (0 BAD)
FSFLASH: CLEAN blocks: 1214 (1214)
FSFLASH: HEADER blocks: 14
FSFLASH: SLACK blocks: 928
FSFLASH: MIN CLEAN blocks: 64
FSFLASH: RAM used for LUT's: 138 KB
FSFLASH
FSFLASH: Mounting logical flash device 189
FSFLASH: Corrupt configuration block