Телефон 5610 был с Contact service.
Я ему заалели RPL, сделал SX авторизацию и залил полный PM без 308 блока.
Теперь телефон включается, но ведет себя не адекватно, перезагружается, отключается.
Не подскажите, в чем моет быть дело?
Лог прилагаю:
Phone is in: Normal mode
Model: RM-242 ( RM-242)
V 09.40/07-11-08/RM-242 (c) Nokia
Production serial number CEJ591907
Product code 0552211
Module code 0203378
Basic production code 0515121
Flash code
Order number
Long production SN 0
MCU SW V 09.40/07-11-08/RM-242/(c) Nokia
HW 1000
PCI
RFIC 17141715
DSP ICPR71_08w30
LCD SHARP
PPM V 09.40/07-11-08/RM-242/(c) Nokia /I
BT MCM 2222-143
Retu 15
Tahvo 22
Content Pack Content: blue_i/V 09.40/07-11-08/RM-242/(c) Nokia /
IMEI: 35895201хххххх2
Phone SelfTest status:
Passed: TAHVOINT
Passed: EAR_DATA_LOOP
Passed: SIM_CLK_LOOP
Passed: SIM_IO_CTRL_LOOP
Passed: SIM_LOCK
Passed: SLEEP_X_LOOP
Passed: SLEEPCLK_FREQ
Passed: UEM_CBUS_IF
Passed: KEYBOARD_STUCK
Passed: CAMERA_IF
Fail: BACKUP_BATT
NotExecuted: LPRF_IF
NotExecuted: LPRF_AUDIO_LINES
Passed: CURRENT_CONS
Passed: LCD
NotExecuted: SEC_CAMERA_IF
Passed: BACKLIGHT
Passed: SECURITY
Passed: PWR_KEY
NotExecuted: BT_WAKEUP
NotExecuted: BTEMP
NotExecuted: BT_SLEEP_CLK
NotExecuted: AMB_LIGHT_SENSOR
NotExecuted: IVE
NotExecuted: IIC
NotExecuted: EXT_DEVICE
NotExecuted: CDSP_RF_BB_IF
NotExecuted: CDSP_RF_SUPPLY
NotExecuted: CDSP_TX_IQ
NotExecuted: CDSP_TXC_DATA
NotExecuted: CDSP_PWR_DETECTOR_BIAS
NotExecuted: CDSP_RX_PLL_PHASE_LOCK
NotExecuted: CDSP_TX_PLL_PHASE_LOCK
NotExecuted: CDSP_WCDMA_TX_POWER
NotExecuted: CDSP_RX_IQ_LOOP_BACK
NotExecuted: CDSP_GSM_TX_POWER
Summary: Passed(15), NotExucuted(20), OtherStatus(1)