Показано с 1 по 3 из 3

Тема: Z710 После ТП. Требуется помощь по расшифровке дебаг-лога

  1. #1
    Member
    Регистрация
    10.01.2007
    Адрес
    Зверево Ростовской, Ш
    Сообщений
    236
    Спасибо
    85
    Благодарностей: 19 : 11

    Z710 После ТП. Требуется помощь по расшифровке дебаг-лога

    Тело, как обычно, после горячего сдёргивания аккумулятора.
    Лог setool указывал на слетевший GDFS. Сделал ТП, прошил все пять файлов.
    Теперь тело дрыгает вибратором, вспыхивает белым экраном и висит, потребляя 50мА.
    Скрытый текст: Показать
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 8224 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 10368 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 11424 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 12480 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 107296 bytes requested in total ****
    FSFLASH: Check
    FSFLASH: Stage 1
    FSFLASH: Stage 2
    FSFLASH: Stage 3
    FSFLASH: Stage 4
    FSFLASH: Config block located @ 0x45E00000
    FSFLASH: Mount block located @ 0x4663A000
    FSFLASH: CLEAN blocks 1037
    FSFLASH: MIN CLEAN blocks 512
    FSFLASH: BAD blocks 0
    FSFLASH: State 5 skipped
    FSFLASH: Stage 6.1
    FSFLASH: Stage 6.2 skipped
    FSFLASH: Stage 7
    FSFLASH: Stage 8
    FSFLASH: Check done
    FSFLASH: TOTAL number of blocks: 32768
    FSFLASH: AVAILABLE blocks: 31596
    FSFLASH: MAX logical block nbr: 31595
    FSFLASH: COMMITTED blocks: 8115
    FSFLASH: FREE blocks: 23481
    FSFLASH: DIRTY blocks: 23579 (0 BAD)
    FSFLASH: CLEAN blocks: 1036 (1036 NOR)
    FSFLASH: HEADER blocks: 38
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 122496 bytes requested in total ****
    FS: Mounting FAT file system partition / for read/write
    FS: SecPerClus = 2
    FS: BytesPerSec = 512
    FS: RootEntCnt = 512
    FS: NumFATs = 1
    FS: RsvdSecCnt = 1
    FS: Type: FAT16
    FS: AtFSX: 11.13
    FS: Block size: 1024
    FS: Read size: 1024
    FS: FAT mirroring: OFF
    FS: Sector locations
    FS: Size: 55675 (0xD97B)
    FS: PBR: 1 (0x1)
    FS: FAT start: 2 (0x2)
    FS: Active FAT start: 2 (0x2)
    FS: Root start: 112 (0x70)
    FS: Clusters: 27766 (0x6C76)
    FS: Cluster start: 144 (0x90)
    FS: Cluster last: 55675 (0xD97B)
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 131104 bytes requested in total ****
    FS: File System Size: 27766 (27766 Kb)
    FS: Free Logical Blocks: 20075 (20075 Kb)
    FS: Free Physical Blocks: 23480 (23480 Kb)
    FS: Used Blocks: 7691 (7691 Kb)
    FS: Partition / mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 146816 bytes requested in total ****
    FS: Mounting FAT file system partition /tpa/settings/ui/bgim/cache for read/write
    FS: SecPerClus = 2
    FS: BytesPerSec = 512
    FS: RootEntCnt = 512
    FS: NumFATs = 1
    FS: RsvdSecCnt = 1
    FS: Type: FAT12
    FS: AtFSX: 11.13
    FS: Block size: 1024
    FS: Read size: 1024
    FS: FAT mirroring: OFF
    FS: Sector locations
    FS: Size: 2199 (0x897)
    FS: PBR: 1 (0x1)
    FS: FAT start: 2 (0x2)
    FS: Active FAT start: 2 (0x2)
    FS: Root start: 6 (0x6)
    FS: Clusters: 1081 (0x439)
    FS: Cluster start: 38 (0x26)
    FS: Cluster last: 2199 (0x897)
    FS: File System Size: 1081 (1081 Kb)
    FS: Free Logical Blocks: 1081 (1081 Kb)
    FS: Free Physical Blocks: 23480 (23480 Kb)
    FS: Used Blocks: 0 (0 Kb)
    FS: Partition /tpa/settings/ui/bgim/cache mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 163104 bytes requested in total ****
    FS: Mounting FAT file system partition /ifs for read/write
    FS: SecPerClus = 2
    FS: BytesPerSec = 512
    FS: RootEntCnt = 512
    FS: NumFATs = 1
    FS: RsvdSecCnt = 1
    FS: Type: FAT12
    FS: AtFSX: 11.13
    FS: Block size: 1024
    FS: Read size: 1024
    FS: FAT mirroring: OFF
    FS: Sector locations
    FS: Size: 2799 (0xAEF)
    FS: PBR: 1 (0x1)
    FS: FAT start: 2 (0x2)
    FS: Active FAT start: 2 (0x2)
    FS: Root start: 8 (0x8)
    FS: Clusters: 1380 (0x564)
    FS: Cluster start: 40 (0x28)
    FS: Cluster last: 2799 (0xAEF)
    FS: File System Size: 1380 (1380 Kb)
    FS: Free Logical Blocks: 1114 (1114 Kb)
    FS: Free Physical Blocks: 23480 (23480 Kb)
    FS: Used Blocks: 266 (266 Kb)
    FS: Partition /ifs mounted
    MALL: **** NEW MAXIMUM HEAP 1 USAGE: 176896 bytes requested in total ****
    FS: Mounting FAT file system partition /system for read/write
    FS: SecPerClus = 2
    FS: BytesPerSec = 512
    FS: RootEntCnt = 512
    FS: NumFATs = 1
    FS: RsvdSecCnt = 1
    FS: Type: FAT12
    FS: AtFSX: 11.13
    FS: Block size: 1024
    FS: Read size: 1024
    FS: FAT mirroring: OFF
    FS: Sector locations
    FS: Size: 2399 (0x95F)
    FS: PBR: 1 (0x1)
    FS: FAT start: 2 (0x2)
    FS: Active FAT start: 2 (0x2)
    FS: Root start: 6 (0x6)
    FS: Clusters: 1181 (0x49D)
    FS: Cluster start: 38 (0x26)
    FS: Cluster last: 2399 (0x95F)
    FS: File System Size: 1181 (1181 Kb)
    FS: Free Logical Blocks: 1155 (1155 Kb)
    FS: Free Physical Blocks: 23480 (23480 Kb)
    FS: Used Blocks: 26 (26 Kb)
    FS: Partition /system mounted
    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 96 bytes requested in total ****


    BuildInfo: Label: <CRH109672_3_R8A002> Variant: <cxc4010129_E150_CU_PHONE>
    BuildInfo: Generated: 2006-08-16 16:24 by Off.Bld
    Product : <Sony Ericsson Z710> Version: 0000
    HW Setup : Marika P2A (Id:0x9900) IRDA: B047 BT: C047 RS232: Error
    Vendor : <Sony Ericsson> PNP: SER USB: 0FCE BT: 0000
    OS: core startup complete!
    OS: Vector 13 Pri 0 do not use DDA
    OS: Vector 24 Pri 1 do not use DDA
    OS: Vector 23 Pri 2 do not use DDA
    OS: Vector 22 Pri 3 do not use DDA
    OS: Vector 18 Pri 4 do not use DDA
    OS: Vector 7 Pri 11 do not use DDA
    OS: Vector 6 Pri 5 do not use DDA
    OS: Vector 2 Pri 6 do not use DDA
    OS: Vector 3 Pri 0 do not use DDA
    OS: Vector 27 Pri 7 do not use DDA
    OS: Vector 1 Pri 8 do not use DDA
    OS: Vector 0 Pri 9 do not use DDA
    OS: Vector 32 Pri 21 do not use DDA
    OS: Vector 33 Pri 21 do not use DDA
    OS: Vector 60 Pri 30 do not use DDA
    OS: Vector 70 Pri 30 do not use DDA
    OS: Vector 71 Pri 30 do not use DDA
    OS: Vector 9 Pri 10 do not use DDA
    OS: Vector 17 Pri 10 do not use DDA
    OS: Vector 37 Pri 17 do not use DDA
    OS: Vector 26 Pri 3 do not use DDA

    MPH: PID 65634
    RLC_DL: S I
    RR: PID 65636
    RR: RR_MM_PRIM 469955328
    RR: MM_RR_PRIM 469955968
    RR: MPH_RR_PRIM 469956608
    RR: RR_MPH_PRIM 469961088
    RR: DL_RR_PRIM 469964288
    RR: RR_DL_PRIM 469964928
    RR: RR_MMM_PRIM 469968768
    RR: MMM_RR_PRIM 469969408
    RR: RR_RLC_PRIM 469970688
    RR: RLC_RR_PRIM 469971328
    RR: PH_MPH_PRIM 470181248
    RR: MPH_PH_PRIM 470186688
    RR: MPH_CB_PRIM 469973568
    RR: CB_MPH_PRIM 469974208
    RR: MPH_MMM_PRIM 469976128
    RR: MMM_MPH_PRIM 469976768
    RR: PH_RLC_PRIM 470194688
    RR: RLC_PH_PRIM 470197888
    RR: RLC_LLC_PRIM 469981888
    RR: LLC_RLC_PRIM 469982528
    RR: RR_LLC_PRIM 469985088
    RR: LLC_RR_PRIM 469985728
    RR: PH_RR_PRIM 470200448
    RR: RR_PH_PRIM 470201088
    RR: RR_TIMER_PRIM 469996928
    RR: SIGID_INTERVAL_START_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996927
    RR: SIGID_INTERVAL_END_V2_UNIQUE_TEST_ON_RR_TIMER_PRIM 469996949
    RR: TEST_RR_TIMER_PRIM 1
    RR: MPH_TIMER_PRIM 469995008
    RR: T3206_VALUE: 800 ms
    RR: T3208_VALUE: 960 ms
    RR: T3210_VALUE: 300 ms

    RLC: RLC_LLC
    RLC: RLC_IDLE_REQ = 469981888
    RLC: RLC_GMM_DATA_REQ = 469981889
    RLC: RLC_DATA_REQ = 469981890
    RLC: RLC_UNITDATA_REQ = 469981891
    RLC: RLC_RLC_DATA_REQ = 469981893
    RLC: RLC_RLC_UNITDATA_REQ = 469981894
    RLC: RLC_DATA_RSP = 469981897

    RLC: LLC_RLC
    RLC: RLC_DATA_CNF = 469982528
    RLC: RLC_DATA_IND = 469982529
    RLC: RLC_STATUS_IND = 469982530

    RLC: RR_RLC
    RLC: RR_TBF_ESTABLISH_REQ = 469970688
    RLC: RR_UPLINK_TBF_RELEASE_REQ = 469970690
    RLC: RR_DOWNLINK_TBF_RELEASE_REQ = 469970691
    RLC: RR_TBF_RELEASE_RSP = 469970692
    RLC: RR_DOWNLINK_ACK_NACK_REQ = 469970693

    RLC: RLC_RR
    RLC: RR_TBF_ESTABLISH_CNF = 469971328
    RLC: RR_UPLINK_TBF_RELEASE_CNF = 469971330
    RLC: RR_DOWNLINK_TBF_RELEASE_CNF = 469971331
    RLC: RR_TBF_ESTABLISH_IND = 469971329
    RLC: RR_TBF_RELEASE_IND = 469971332
    RLC: RR_UPLINK_ACK_NACK_IND = 469971333

    RLC: PH_RLC
    RLC: PH_RLC_DATA_REQ = 470194688
    RLC: PH_RLC_DATA_RELEASE_REQ = 470194690
    RLC: PH_RLC_CONTROL_REQ = 470194691
    RLC: PH_RLC_CONTROL_CONTROL_0_PDCH_REQ = 470194693
    RLC: PH_RLC_CONTROL_CONTROL_1_PDCH_REQ = 470194694
    RLC: PH_RLC_CONTROL_CONTROL_2_PDCH_REQ = 470194695
    RLC: PH_RLC_CONTROL_CONTROL_3_PDCH_REQ = 470194696
    RLC: PH_RLC_CONTROL_CONTROL_4_PDCH_REQ = 470194697
    RLC: PH_RLC_CONTROL_CONTROL_5_PDCH_REQ = 470194698
    RLC: PH_RLC_CONTROL_DATA_0_PDCH_REQ = 470194699
    RLC: PH_RLC_CONTROL_DATA_1_PDCH_REQ = 470194700
    RLC: PH_RLC_CONTROL_DATA_2_PDCH_REQ = 470194701
    RLC: PH_RLC_CONTROL_DATA_3_PDCH_REQ = 470194702
    RLC: PH_RLC_CONTROL_DATA_4_PDCH_REQ = 470194703
    RLC: PH_RLC_CONTROL_DATA_5_PDCH_REQ = 470194704
    RLC: PH_RLC_CONTROL_CONTROL_0_PDTCH_PDCH_REQ = 470194705
    RLC: PH_RLC_CONTROL_CONTROL_1_PDTCH_PDCH_REQ = 470194706
    RLC: PH_RLC_CONTROL_CONTROL_2_PDTCH_PDCH_REQ = 470194707
    RLC: PH_RLC_CONTROL_CONTROL_3_PDTCH_PDCH_REQ = 470194708
    RLC: PH_RLC_CONTROL_CONTROL_4_PDTCH_PDCH_REQ = 470194709
    RLC: PH_RLC_CONTROL_CONTROL_5_PDTCH_PDCH_REQ = 470194710
    RLC: PH_RLC_CONTROL_DATA_0_PDTCH_PDCH_REQ = 470194711
    RLC: PH_RLC_CONTROL_DATA_1_PDTCH_PDCH_REQ = 470194712
    RLC: PH_RLC_CONTROL_DATA_2_PDTCH_PDCH_REQ = 470194713
    RLC: PH_RLC_CONTROL_DATA_3_PDTCH_PDCH_REQ = 470194714
    RLC: PH_RLC_CONTROL_DATA_4_PDTCH_PDCH_REQ = 470194715
    RLC: PH_RLC_CONTROL_DATA_5_PDTCH_PDCH_REQ = 470194716
    RLC: PH_RLC_RELEASE_REQ = 470194717

    RLC: RLC_PH
    RLC: PH_RLC_DATA_CNF = 470197888
    RLC: PH_RLC_EGPRS_DATA_TYPE1_CNF = 470199172
    RLC: PH_RLC_EGPRS_DATA_TYPE2_CNF = 470199173
    RLC: PH_RLC_EGPRS_DATA_TYPE3_CNF = 470199174
    RLC: PH_RLC_DATA_IND = 470197889
    RLC: PH_RLC_EGPRS_DATA_RTS_IND = 470199171
    RLC: PH_RLC_DATA_RTS_IND = 470197890
    RLC: PH_RLC_DATA_RELEASE_CNF = 470197891
    RLC: PH_RLC_CONNECT_IND = 470197892
    RLC: PH_RLC_CONTROL_CNF = 470197893
    RLC: PH_RLC_CONTROL_IND = 470197894
    RLC: PH_RLC_RELEASE_CNF = 470197895

    RLC: RLC_TIMER
    RLC: RLC_TIMER_T3164 = 469987008
    RLC: RLC_TIMER_T3166 = 469987009
    RLC: RLC_TIMER_T3180 = 469987010
    RLC: RLC_TIMER_T3182 = 469987011
    RLC: RLC_TIMER_T3190 = 469987012
    RLC: RLC_TIMER_T3192 = 469987015
    RLC_UL: S I
    MPH_Low: PID 65639
    LLC 11: state 0
    LLC 9: state 0
    LLC 7: state 0
    LLC 5: state 0
    LLC 3: state 0
    LLC: PID 65640
    LLC: <SMS 469772354
    LLC: >SMS 469772996
    LLC: <SNDCP 469978688 469978696
    LLC 1: state 0
    Prototype start process started!

    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 160 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 224 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 320 bytes requested in total ****
    MALL: **** NEW MAXIMUM HEAP 0 USAGE: 416 bytes requested in total ****
    M
    FSUSB: FS-USB Connection was initiated.


    RLiIRPHY[SetPolarity] Mode=0
    IRPHY[SetSignalPolarity] InvertRx: 1
    EILD_HCITL.c: 585 EILD_HCITL_SetTXPin: PinLevel = 0
    nk: RLINK_PH
    RLink: PH_RLINK_CONNECT_IND = 470178690
    RLink: PH_RLINK_DISCONNECT_IND = 470178691
    RLink: PH_RLINK_RTS_IND = 47017
    HW_FG: En Ch8688
    RLink: PH_RLINK_DATA_IND = 470178689

    RLC: PH_RLINK
    RLink: PH_RLINK_DATA_REQ = 470178048

    RLink: RLINK_RLP
    RLink: RLINK_RLP_RTS_IND = 469849344
    RLink: RLINK_RLP_DATA_IND = 469849346

    RLC: RLP_RLINK
    RLink: RLINK_RLP_DATA_REQ = 469849347
    RLink: RLINK_RLP_DTX_REQ = 469849348

    RLC: RLINK_RR
    RLC: RR_CHANNEL_MODE_INFO_IND = 314576640
    RLC: RR_CHANNEL_MODE_MODIFY_IND = 314576641
    RLink: State Idle
    RH: Activate on LRRAT: G
    RH state: Inactive
    Rational Rose RealTime C Target Run Time SystemRelease 6.50.C.00
    Copyright (c) 1993-2003 Rational Software

    RTS ERROR: Failed to allocate additional 896 byte as static memory, allocating as heap, 1095 32-bit needed (1025 configured)
    RTS ERROR: Failed to allocate additional 4 b
    EILD_LLRS232_Init. Original GPIO routing:
    RX : No
    TX : No
    CTS: No, Index=0
    RTS: No, Index=0

    ### Print Server: Requesting DebugMux channel...
    y











    348 ### Print Server: Started OK



    A



    W3
    W3
    W3
    W3
    W3
    W3
    W3
    W3
    W3
    W3
    W3



    Никто на знает, где в Z710 стоит такое:
    Цитата Сообщение от word-inf
    Решение - микросхема ST4G3234, на схеме n1600 (4-х битный буфер и преобразователь уровней - отвечает за сигналы EGR_CLK, EGR_TIMEREF (он же TXON), EGR_IRQ0n, EGR_NMI). Снимаю на рабочем теле - зависает на А. Далее контакты идут в EDGAR (D2003), по логике, если такая проблема возможно и сним что-то.
    Добавлено.


    Вроде бы нашёл. В отсеке с флешкой и Edgar и стекляшка прямоугольная стоит. Буду на свежую голову перекатывать.
    Последний раз редактировалось beatl; 02.09.2009 в 02:43.

  2. Спасибо сказали:

    vitaliyko (02.09.2009)

  3. #2
    Senior Member
    Регистрация
    17.04.2006
    Адрес
    Хабаровск
    Сообщений
    960
    Спасибо
    90
    Благодарностей: 135 : 81
    У меня сейчас лежит с точно таким же дебаг-логом K550, где "W3" стремится в бесконечность. Поменял эту стекляшку (N2750 в K550) и телефон ожил :-).

  4. Спасибо сказали:

    beatl (05.09.2009)

  5. #3
    Member
    Регистрация
    10.01.2007
    Адрес
    Зверево Ростовской, Ш
    Сообщений
    236
    Спасибо
    85
    Благодарностей: 19 : 11
    А у меня завелся после перекатки DB2203

Похожие темы

  1. Рашифруйте инфу из дебаг лога
    от avtor1989 в разделе SonyEricsson для новичков
    Ответов: 0
    Последний ответ: 19.03.2010, 17:57
  2. z710 один раз моргает дисплеем. есть дебаг лог.
    от vv8888 в разделе SE Software и Firmware
    Ответов: 5
    Последний ответ: 26.05.2008, 03:00
  3. Требуется помощь в 6280 и 6288 после воды.
    от 0000 в разделе Телефоны BB5
    Ответов: 1
    Последний ответ: 04.09.2007, 01:07
  4. z710 требуется помощь
    от Valera_lex в разделе SonyEricsson для новичков
    Ответов: 1
    Последний ответ: 14.06.2007, 19:12

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru