5800 не получается разлочить

[ZBAR]

Пробовал Universalbox и Cyclone
Вот что пишет Cyclone

Initializing FBUS...
All initialized - Ready to work
MCU Version V ICPR72_09w20.5
MCU Date 16-06-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354183028857080
Mastercode 425341160
IMEI Spare 3A45810382580708
IMEI SV 3345810382580748F3000000
PSN C7B677983
Product Code 0577533
Basic Product Code 0552692
PSD 0000000000000000
LPSN 0
WLAN MAC 00247DE90C54
APE SW V 30.0.011
APE Variant V 30.0.011
APE Test eno_version
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 1101
RFIC 17141715
DSP ICPR72_09w19_1
Simlock Server SIMLOCK SERVER
Simlock Key 2343300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23433F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 23486F
BB5 Unlock Started...
MCU Version V ICPR72_09w20.5
MCU Date 16-06-09
Product RM-356
Manufacturer (c) Nokia
IMEI 354183028857080
Mastercode 425341160
Simlock Server SIMLOCK SERVER
Simlock Key 2343300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23433F
Simlock [2,1] State: CLOSED Type: MCC-MNC Data: 23486F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20C0010669720052870900B99775B3FF47B6685B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.35.0, Algo: XSR 1.5
Flashbus Write baud set to 4.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 20C0010669720052870900B99775B3FF47B6685B
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
BB5 Unlock Failed -> Failed to get Lock Key (6);

[mavrs]

прошил бы для начала а после пробуй

[ZBAR]

прошил,ничего не изменилось

[oleg666]

бокс обновлен последним апдейтом?

[uo5oq]

MCU Version V ICPR72_09w20.5

Так просто не раскодировать.

[djmixer]

Так просто не раскодировать.

Но уже скоро

if version is 30.0.011. So you have to wait for updates, phone with V30.XX have some problem to calcuating codes, we will add rapido rpl option to unlock these phones

[mihy]

mt и Genie раскодируют без проблем через Rapido rp эту версиюl.

[vvadya]

cyclone на сегодняшний день может раскодировать эту версию?

Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Received Security Block OK !
Writing Security Block...
BB5 Unlock Failed -> Failed to write Security Block

кусочек лога с процесса раскодировки cyclone-box

[Aндрей1967]

Но уже скоро

скоро это когда и чем?