кто знает как правельно писть регион ?
в оптике для C260
прошивка у него была C260AMGG1 где её взять?!
а залочен был под VD2
вот лог
Код:
I E1 17:00:06 OptiFlash 4.14 T started
I E2 17:00:39 ThreadGUI started
I E3 17:00:39 ThreadProtocol started
I E4 17:00:39 OS: NT family, Ver:5.1
I E5 17:00:39 Boot loader protocol type: passive
I E6 17:00:39 Memory interface type: 0
I E7 17:00:39 Setup loader: C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\http://www.x-drivers.ru_agere_optifl...3_nice_std.sre
I E8 17:00:39 Setup loader base addr: 0x04000000
I E9 17:00:39 Flash loader: C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\http://www.x-drivers.ru_agere_optifl...ce_std_v24.sre
I E10 17:00:39 Flash loader base addr: 0x00000000
I E11 17:00:39 Stack base addr: 0x00000000
I E12 17:00:39 Stack buffers: 1
I E13 17:00:39 0: 0x00000000 - 0x00ffffff [16 MB (16777216 Bytes)]
I E14 17:00:39 Opened COM1 at 115200 baud
I E15 17:00:39 PC transfer speeds (COM1): 57600 115200 230400 460800 921600
I E16 17:00:39 Loading S-record file (RangeCheck=Off)
I E17 17:00:39 File: C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\http://www.x-drivers.ru_agere_optifl...3_nice_std.sre
I E18 17:00:39 SRE line 179: IGNORING: S70504001000E6
I E19 17:00:39 There is 1 memory region in the S-record file:
I E20 17:00:39 1: 0x04001000 - 0x04001b13 = 2836 Bytes
I E21 17:00:39 Loading S-record file (RangeCheck=Off)
I E22 17:00:39 File: C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\http://www.x-drivers.ru_agere_optifl...ce_std_v24.sre
I E23 17:00:39 SRE line 1188: IGNORING: S70500000000FA
I E24 17:00:39 There is 1 memory region in the S-record file:
I E25 17:00:39 1: 0x00000000 - 0x00004a2b = 18988 Bytes
I E26 17:00:39 Loading S-record file (RangeCheck=On)
I E27 17:00:39 File: C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\lsd_c260xegg1вроде фулл\C260XEGG1.s3
I E28 17:00:39 SRE line 117: IGNORING: S70500000000FA
I E29 17:00:39 SRE line 768: IGNORING: S70500004000BA
I E30 17:00:40 SRE line 363143: IGNORING: S70500021000E8
I E31 17:00:40 There are 4 memory regions in the S-record file:
I E32 17:00:40 1: 0x00000000 - 0x0000073f = 1856 Bytes
I E33 17:00:40 2: 0x00004000 - 0x00006897 = 10392 Bytes
I E34 17:00:40 3: 0x00020000 - 0x00020003 = 4 Bytes
I E35 17:00:40 4: 0x00021000 - 0x005a8857 = 5797976 Bytes
I E36 17:00:40 SendFile=C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\http://www.x-drivers.ru_agere_optifl...ce_std_v24.sre, Mode=3
I E37 17:00:40 Power on mobile !
I E38 17:00:41 TalkToBootLoader (using COM1)
I E39 17:00:41 Talking to passive bootloader
I E40 17:00:51 Bootloader V1.0 using UART1
I E41 17:00:51 ROM mask ID: 0x00004b45 ( KE)
I E42 17:00:51 ID register: 0x000603ee (Trident II)
I E43 17:00:51 Bootloader type: 5 (0)
I E44 17:00:51 Max. transfer size: 2176 bytes
I E45 17:00:51 Adjusted max. transfer size to: 1920 bytes
I E46 17:00:51 Data to transfer: 2836 bytes in 1 region(s)
I E47 17:00:51 Send: 0x04001000 - 0x0400177f (=1920)
I E48 17:00:51 Send: 0x04001780 - 0x04001b13 (=916)
I E49 17:00:52 Talking to setup loader
I E50 17:00:52 Setup loader V1.1 using UART1
I E51 17:00:52 Setup loader type: 2
I E52 17:00:52 Max. transfer size: 2048 bytes
I E53 17:00:52 Adjusted max. transfer size to: 1792 bytes
I E54 17:00:52 Data to transfer: 18988 bytes in 1 region(s)
I E55 17:00:52 Send: 0x00000000 - 0x000006ff (=1792)
I E56 17:00:52 Send: 0x00000700 - 0x00000dff (=1792)
I E57 17:00:52 Send: 0x00000e00 - 0x000014ff (=1792)
I E58 17:00:52 Send: 0x00001500 - 0x00001bff (=1792)
I E59 17:00:52 Send: 0x00001c00 - 0x000022ff (=1792)
I E60 17:00:52 Send: 0x00002300 - 0x000029ff (=1792)
I E61 17:00:53 Send: 0x00002a00 - 0x000030ff (=1792)
I E62 17:00:53 Send: 0x00003100 - 0x000037ff (=1792)
I E63 17:00:53 Send: 0x00003800 - 0x00003eff (=1792)
I E64 17:00:53 Send: 0x00003f00 - 0x000045ff (=1792)
I E65 17:00:53 Send: 0x00004600 - 0x00004a2b (=1068)
I E66 17:00:54 TalkToBootloader: OK
I E67 17:00:54 Duration: 13s
I E68 17:00:54 SendFile=C:\Documents and Settings\Администратор\Рабочий стол\Прошивание\lsd_c260xegg1вроде фулл\C260XEGG1.s3, Mode=0
I E69 17:00:54 TalkToFlashloader (using COM1)
I E70 17:00:54 Switching over to flash loader
I E71 17:00:59 SendFile: 5 (ERR_PROTOCOL)
I E72 17:00:59 Closed COM1
I E73 17:00:59 ReLoad: 5 (ERR_PROTOCOL)
I E74 17:00:59 Error code: ERR_PROTOCOL
E E75 17:00:59 Sorry, an error has occured ! (ERR_PROTOCOL)
I E76 17:00:59 ThreadProtocol finished
I E77 17:00:59 ThreadProtocol: 5
I E78 17:00:59 ThreadGUI finished