Показано с 1 по 7 из 7

Тема: Nokia 7373 и Cyclone BOX не прошивается (Failed to Process all Image files)

  1. #1
    Member
    Регистрация
    29.06.2009
    Сообщений
    124
    Спасибо
    0
    Благодарностей: 23 : 7

    Nokia 7373 и Cyclone BOX не прошивается (Failed to Process all Image files)

    Есть Nokia 7373 в которой не проливается image файл - на сколько я понимаю контент.
    Файл прошивки и языкового пакета прошился при помощи UFS. А вот циклон шайтан коробка не хочет. И это не в первый раз, просто отказывается прошивать (кабель рабочий 100% 7pin bb5 прошивал им на JAF и UFS) далее лог циклона:
    Код:
    Initializing security card...
    Card Serial Number: D********
    Card Firmware Revision: 0109
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage	5,04v	PASSED
    MCU Voltage	3,29v	PASSED
    Core Voltage	1,78v	PASSED
    VBAT Voltage	1,46v	PASSED
    VBAT Voltage	4,93v	PASSED
    Box VPP disabled
    VPP Voltage	0,04v	PASSED
    Internal Box VPP Enabled
    VPP Voltage	4,95v	PASSED
    Box VPP disabled
    VPP Voltage	0,00v	PASSED
    External Box VPP Enabled
    VPP Voltage	0,04v	FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    Initializing FBUS...
    All initialized - Ready to work
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
    CMT_EM_ASIC_ID:		00000232
    CMT_EM_ASIC_ID:		00000353
    CMT_PUBLIC_ID:		0E40010FE84700583A315046E626B7D5AAB3B582
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	191EC665
    CMT_SECURE_ROM_CRC:	DFAAF68F
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using OLD BB5 FLASHING PROTOCOL
    FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Internal Box VPP Enabled
    External CMT Phone VPP Enabled, Source: Box Internal 5V
    PAPUBKEYS Hash for CMT: 50B1B4F65829FE94B06088AE470164C9426BD29E
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Simlock Store not supported, not a PA_SL2 Phone
    Trying to store WMDRM RPL...
    Reading Keys...
    Failed to Create RPL from phone -> Failed to read WMDRM Key
    RPL backup thread finished, continuing...
    Backing up simlock...
    MCU Version	V 05.50
    MCU Date	14-08-07
    Product		RM-209
    Manufacturer	(c) Nokia.           
    IMEI		353240017590733
    Mastercode	727434510
    Simlock backup problem -> Failed to read PM 308, this is critical
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm209__05.50.mcusw (CMT)...
    Booting RAP...
    CMT_SYSTEM_ASIC_ID:	000000010000022600010006010C192101001101
    CMT_EM_ASIC_ID:		00000232
    CMT_EM_ASIC_ID:		00000353
    CMT_PUBLIC_ID:		0E40010FE84700583A315046E626B7D5AAB3B582
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	BAF3A9C3DBFA8454937DB77F2B8852B1
    CMT_BOOT_ROM_CRC:	191EC665
    CMT_SECURE_ROM_CRC:	DFAAF68F
    rm209__05.50.mcusw, Type: Flash Image, Algo: BB5, BB5 ALGORITHM
    RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    FlashChip[0,CMT]: 0x0001002F00006921, AMD, NOR
    FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
    RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
    Flashbus Write baud set to 2.0Mbits
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Internal Box VPP Enabled
    External CMT Phone VPP Enabled, Source: Box Internal 5V
    PAPUBKEYS Hash for CMT: 50B1B4F65829FE94B06088AE470164C9426BD29E
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00000000-0x000006BF, NOR
    EraseArea[0,CMT]: 0x000006C0-0x0001FFFF, NOR
    EraseArea[0,CMT]: 0x00020000-0x0007FFFF, NOR
    EraseArea[0,CMT]: 0x00080000-0x000DFFFF, NOR
    EraseArea[0,CMT]: 0x00100000-0x001FFFFF, NOR
    EraseArea[0,CMT]: 0x00200000-0x0031FFFF, NOR
    EraseArea[0,CMT]: 0x00320000-0x0105FFFF, NOR
    EraseArea[0,CMT]: 0x01060000-0x01067FFF, NOR
    EraseArea[0,CMT]: 0x01068000-0x0107FFFF, NOR
    Waiting 320s for erasure finish...
    Erase taken 4.890s
    Processing Flash Image Failed -> Group Erase failed
    Failed to Process all Image files -> Failed to process rm209__05.50.mcusw
    Программатор тупо отказывается прошивать любой тел. P.S. прошивки указывал вручную.

  2. #2
    Mega Member Аватар для djmixer
    Регистрация
    12.03.2005
    Адрес
    Закарпаття Награды:99
    Сообщений
    2,289
    Спасибо
    76
    Благодарностей: 480 : 195
    А через переходник шьеш?

  3. #3
    Mega Member
    Регистрация
    06.12.2006
    Адрес
    Хамунаптра
    Сообщений
    1,488
    Спасибо
    99
    Благодарностей: 185 : 110
    а ufs тоже не шьет

    попробуй другую версию

  4. #4
    Member
    Регистрация
    29.06.2009
    Сообщений
    124
    Спасибо
    0
    Благодарностей: 23 : 7
    Шью напрямую. Без переходника.

  5. #5
    Mega Member Аватар для djmixer
    Регистрация
    12.03.2005
    Адрес
    Закарпаття Награды:99
    Сообщений
    2,289
    Спасибо
    76
    Благодарностей: 480 : 195
    Цитата Сообщение от dearfear Посмотреть сообщение
    Шью напрямую. Без переходника.
    Без переходника циклоновского не прошьет.

  6. #6
    Senior Member Аватар для Дим@
    Регистрация
    22.09.2007
    Адрес
    Харьков
    Сообщений
    904
    Спасибо
    16
    Благодарностей: 147 : 56
    Цитата Сообщение от dearfear Посмотреть сообщение
    Box TX2 Data Pin set to: Service Pin 3
    шить через переходник и убрать галку use TX2

  7. #7
    Member
    Регистрация
    29.06.2009
    Сообщений
    124
    Спасибо
    0
    Благодарностей: 23 : 7
    Эффект тот же так он с первого дня себя ведёт...

    пробую прошить по USB заведомо нормальный аппарат. Прошивка установлена из пакета Phoenix.
    Код:
    Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.8340
    Handling device: [Cyclone Team], [Cyclone Bootloader]
    Handling device: [Cyclone Team], [Cyclone Box]
    Initializing box...
    Box Firmware: Cyclone Nokia Application v01.16, (Jan 25 2010 02:27:03, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application
    Box Serial Number: C0001837
    HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk19
    Initializing security card...
    Card Serial Number: D********
    Card Firmware Revision: 0109
    Card is activated
    Box is activated
    Started box selftests procedure
    USB Voltage	5,04v	PASSED
    MCU Voltage	3,29v	PASSED
    Core Voltage	1,78v	PASSED
    VBAT Voltage	0,01v	PASSED
    VBAT Voltage	4,97v	PASSED
    Box VPP disabled
    VPP Voltage	0,04v	PASSED
    Internal Box VPP Enabled
    VPP Voltage	5,01v	PASSED
    Box VPP disabled
    VPP Voltage	0,04v	PASSED
    External Box VPP Enabled
    VPP Voltage	0,04v	FAILED - IGNORED - Probably power supply is not connected
    Box VPP disabled
    All box selftests passed!
    Super DCT4 Activation: TRUE
    Initializing FBUS...
    All initialized - Ready to work
    [BB5 NMWCD]: Found 1 active devices
    [Nokia 6120 classic USB Generic]: Opening Connection
    [Nokia 6120 classic USB Generic]: Port opened OK!
    MCU Version	V 07.02
    MCU Date	18-05-09
    Product		RM-243
    Manufacturer	(c) Nokia
    IMEI		359850012334871
    Mastercode	431722441
    IMEI Spare	3A95580021338407
    IMEI SV		3395580021338457F7000000
    PPM		Vr RUSSIAN, 01-12-06, RM-243n256
    PSN		MMI525862
    Product Code	0546333
    Basic Product Code	0539292
    PSD		0000000000000000
    LPSN		0
    APE SW		07.02
    APE Variant	Vr RUSSIAN, 01-12-06, RM-243
    APE HW		256
    APE ADSP	256
    APE BT		HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
    RETU		15
    TAHVO		22
    AHNE		11
    HW		0801j Vr RUSSIAN, 01-12-06, RM-243n256
    PCI		j Vr RUSSIAN, 01-12-06, RM-243n256
    UEM		Vr RUSSIAN, 01-12-06, RM-243n256
    UPP		Vr RUSSIAN, 01-12-06, RM-243n256
    RFIC		17141715
    DSP		06w41pb_08w28.0.1_rm243
    LCD		Vr RUSSIAN, 01-12-06, RM-243n256
    BT		Vr RUSSIAN, 01-12-06, RM-243n256
    ADSP Sw		Vr RUSSIAN, 01-12-06, RM-243n256
    ADSP DevID		Vr RUSSIAN, 01-12-06, RM-243n256
    ADSP RevID		Vr RUSSIAN, 01-12-06, RM-243n256
    AEM		Vr RUSSIAN, 01-12-06, RM-243n256
    Flip MCUSW		Vr RUSSIAN, 01-12-06, RM-243n256
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Scanning avaiable products...
    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Found 50 products, Filtering BB5 Products - wait...
    1 Products left after filtering. Ready.
    Retrieving Variants for Product RM-243 - wait...
    24 Variants Retrieved
    Processing pre flash tasks...
    Read RPL operation not possible for USB bus
    Backing up simlock...
    [BB5 NMWCD]: Found 1 active devices
    [Nokia 6120 classic USB Generic]: Opening Connection
    [Nokia 6120 classic USB Generic]: Port opened OK!
    MCU Version	V 07.02
    MCU Date	18-05-09
    Product		RM-243
    Manufacturer	(c) Nokia
    IMEI		359850012334871
    Mastercode	431722441
    Simlock backup OK, saved to RM-243_359850012334871_10.02.2010_111610.SLBackup.PM
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Selecting USB Flashing Method...
    [BB5 ADL Server]: Found 0 active devices
    [BB5 ADL Server]: Not Found!
    [BB5 NMWCD]: Found 1 active devices
    [Nokia 6120 classic USB Generic]: Opening Connection
    [Nokia 6120 classic USB Generic]: Port opened OK!
    Proceeding with Alive USB Mode
    CMT FlashChip: 		0x00EC003001210000, Samsung
    IMEI: 			359850012334871
    CMT Public ID: 		0CC00013C0B700588DABCE4CAA67F77EA453E542
    ROOTKEY Hash for CMT: 	CAEEBB65D3C48E6DC73B49DC5063A2EE
    PAPUBKEYS Hash for CMT: 	0FE1BA92D924A658E4800780FA6F4868100AC947
    Switching to RAW mode
    [BB5 BootRom]: Found 0 active devices
    [BB5 BootRom]: Not Found!
    Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
    Как он меня [email protected]!
    Последний раз редактировалось dearfear; 10.02.2010 в 10:21.

Похожие темы

  1. Не прошивается Nokia N95 8GB пишит: Process Failed,Repowering Mobile
    от dok-loki в разделе Остальное оборудование
    Ответов: 25
    Последний ответ: 02.02.2012, 05:36
  2. 21.09.2009 - MT Box Nokia - MT Box DCT4+ patch files update v1.1
    от фозил в разделе MT-Box / GTi / Griffin Box
    Ответов: 2
    Последний ответ: 22.09.2009, 14:07
  3. 14.09.2009 - MT Box Nokia - MT Box DCT4+ patch files update v1.0
    от фозил в разделе MT-Box / GTi / Griffin Box
    Ответов: 1
    Последний ответ: 15.09.2009, 20:51
  4. Nokia 6230I Process Failed
    от Zamiq6795252 в разделе Nokia аппаратный ремонт
    Ответов: 4
    Последний ответ: 21.02.2008, 15:08
  5. Не могу зарусить Nokia 3220 RH-37 - process failed
    от Reader в разделе Телефоны DCT4/WD2/TIKU
    Ответов: 20
    Последний ответ: 18.12.2005, 03:01

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru