Страница 1 из 15 1 2 3 4 5 6 7 8 9 10 11 ... ПоследняяПоследняя
Показано с 1 по 12 из 173

Тема: Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more...

  1. #1
    Elite Member
    Регистрация
    20.06.2003
    Адрес
    Самара
    Сообщений
    7,461
    Спасибо
    149
    Благодарностей: 2,207 : 842

    Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more...

    Код:
    - WORLD'S UNIQUE : Standalone Superdongle Key Calculator 
    Added! No internet, no logs, no time! Calculation time - 0.003 sec ! 
    Works for any SL1, SL2 and SL3.
    
    - WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! 
    No internet, no logs, no time! Calculation time - 0.002 sec ! Works for 
    any SL1 and SL2.
    
    - WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now 
    emulating Nokia SX4 card - no need internet, no need logs to authorize 
    ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated 
    SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), 
    Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, 
    it will automaticly write and authorize using Custom Keys. Authoirzation 
    time - 0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU 
    phones SX4 Remote Card will be used. After authorization with Cyclone, 
    PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!
    
    - WORLD'S UNIQUE - Cyclone can now authorize Barred Phones (with 
    Correct superdongle keys, but with higher KeyIndex ever used than 0 
    (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, 
    when higher key is used, lower keys are automaticly not used in future, 
    and phone requires to use higher key index) - UB and other custom boxes 
    can't do it as long SX4 emulation is not 100% Nokia-Like
    
    - WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _
    FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating 
    only some part of RPL (NPC,HWC,Simlock) - Cyclone is now backing up 
    missing part:
    - Added SUPER DONGLE KEY extracting (this Original Nokia one, so after 
    writing it back phone still can be authorized with original SX4 card)
    
    - Added CMLA KEY DATA extracting (That means created RPL File by 
    Cyclone is now 100% SAME AS NOKIA'S ONE! )
    
    - WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic 
    Tool. This will help diagnostic of downgraded phone, will read Security Block, 
    decode timestamps of current installed SW (and factory one, or Dejan Hack 
    if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL 
    REBUILD downgrade security zone (dead06) soon.
    
    - WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read 
    Security Block and analyze it's health for content of following Security 
    Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV 
    DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and 
    ST_SECURITY_TEST and when problems occur, recommends actions.
    
    - WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated 
    BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only 
    with phones which have been relocked with Cyclone Box. To calculate 
    code is needed only IMEI - no need cable, phone, flashbus logger, etc.
    
    - WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using 
    USB !! (once log file readen)
    
    - Upon box upgrade (maintenance) Bootloader in box is syncronized with 
    server to avoid Activation Problems
    - Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)
    - Fixed "Access Violation" when Cyclone Box SW is already launched and 
    connection to box opened
    - After BB5 Relock, unlock codes is displayed
    - More detailed messages is now shown upon new NCK or RPL calculation
    - BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP 
    timestamp reading and security block analyzing)
    - Total unlock/relock time added after operation is finished (thx to arash)
    - Box Firmware version is now checked upon loading of Nokia Module - if box 
    firmware is obsolete, SW asks for upgrade and doing it automaticly
    - Selected unlock method is now displayed before RootkeyHash support check
    - Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log 
    file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation 
    of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore 
    and whole process took only 1 second!! Keep in mind calculated CYC file is paired 
    with Box Serial number, so in case if your box serial number is changed-go to 
    stored files and purge all "cyc" files.
    - Decrypted AES Subblock of Security Block is now checksum checked (16 bytes 
    checksum at end of block)
    - Fixed "This is invalid integer..." when parsing phone with damaged IMEI
    - When another copy of Cyclone Software is running, message is displayed instead 
    of errors
    - New method of NCK Calculation is now default BB5 unlocking method
    - When New Method of NCK calculation is selected, PA_SL is not determined already 
    (saves lots of time)
    - Skin Manager updated to v6.54 (more stability)
    - When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted
    - Fixed bug when Flash RPL BB5 Data is being written two times
    - Added more verbose debug messages when preparing Boot BB5 Phone
    - Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug 
    fixed
    - New splash screen added, thx to arash, again
    - When Cyclone fails to boot APE subsystem, it shows hint about TX2
    - APE subsystem is now no longer booted upon CheckFlashingBus
    - Changed "Failed to write CMT Cert Data (3)" message, added TX2 information
    - BB5 TX2 Line test added after "CheckFlashingBus"
    - Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it 
    showing apporiate message
    - Writing BB5 CMT HWC Certificate from RPL fixed (thx to arash)
    - Parsing some Simlock Arrays (5130) produced garbage output - fixed (thx to 
    arash again)
    - Added support for Cyclone Box HW Rev A11D


    Just download EXE file and replace at C:\Program files\Cyclone Box\
    Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

    You don't need any activations,logs to use this update.

    Notes:
    SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be
    used.

    BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no
    need know other data, just imei - no need cable or connection to box too).

    BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen
    before.

    Update is fast and most of security functions (sd,rpl) works very fast.

    Don't forget to upgrade your Box Firmware to v01.21.

    Download Link : http://rapidshare.com/files/349693053/Cyclone.exe

    Источник ...

  2. 4 участника(ов) поблагодарили eddiman за его сообщение:

    datiko1 (16.04.2010), renat_d (13.02.2010), Sky-Xaker (13.02.2010), slavik.gul (13.02.2010)

  3. #2
    Elite Member Аватар для LTRG
    Регистрация
    15.06.2006
    Адрес
    Саратов
    Сообщений
    5,129
    Спасибо
    771
    Благодарностей: 1,561 : 562
    Последний раз редактировалось LTRG; 13.02.2010 в 02:20.

  4. #3
    Member
    Регистрация
    28.05.2005
    Адрес
    Москва
    Сообщений
    658
    Спасибо
    27
    Благодарностей: 69 : 13
    Да... вот это реально серпом по причиндалам...

  5. #4
    Elite Member Аватар для Aндрей1967
    Регистрация
    17.12.2004
    Адрес
    Москва, Троицк
    Сообщений
    4,066
    Спасибо
    198
    Благодарностей: 323 : 205
    а сюда выложить можно а то рапида в ероре как всегда

  6. #5
    Elite Member
    Регистрация
    20.06.2003
    Адрес
    Самара
    Сообщений
    7,461
    Спасибо
    149
    Благодарностей: 2,207 : 842
    Цитата Сообщение от Aндрей1967 Посмотреть сообщение
    а сюда выложить можно а то рапида в ероре как всегда
    нет там никаких эрроров - просто на аккаунт жопиться не надо ... как всегда ...

  7. Спасибо сказали:

    Sky-Xaker (13.02.2010)

  8. #6
    Mega Member
    Регистрация
    14.05.2007
    Адрес
    Краснодарский край
    Сообщений
    1,255
    Спасибо
    127
    Благодарностей: 40 : 34
    фигасе...поменяю мт на цеклон...=)

  9. #7
    Elite Member Аватар для Aндрей1967
    Регистрация
    17.12.2004
    Адрес
    Москва, Троицк
    Сообщений
    4,066
    Спасибо
    198
    Благодарностей: 323 : 205
    Цитата Сообщение от eddiman Посмотреть сообщение
    нет там никаких эрроров - просто на аккаунт жопиться не надо ... как всегда ...
    денег нет в кошельке все потратил на rpl

  10. #8
    Elite Member Аватар для LTRG
    Регистрация
    15.06.2006
    Адрес
    Саратов
    Сообщений
    5,129
    Спасибо
    771
    Благодарностей: 1,561 : 562
    сейчас в архив к нам кинем 15 мин.
    >>СКАЧАТЬ Cyclone.exe NEW с файлового архива <<
    Последний раз редактировалось LTRG; 13.02.2010 в 02:13.

  11. 2 участника(ов) поблагодарили LTRG за его сообщение:

    AQ7 (13.02.2010), point21 (13.02.2010)

  12. #9
    Member
    Регистрация
    23.03.2007
    Адрес
    kg
    Сообщений
    247
    Спасибо
    28
    Благодарностей: 25 : 17
    Ой пля! Заказал mх-key, мож отменить а? Может кто достойно перевести, а то там понял, тут нема?
    Posted via Mobile Device

  13. #10
    Elite Member
    Регистрация
    20.06.2003
    Адрес
    Самара
    Сообщений
    7,461
    Спасибо
    149
    Благодарностей: 2,207 : 842
    Цитата Сообщение от krysa Посмотреть сообщение
    Ой пля! Заказал mх-key, мож отменить а? Может кто достойно перевести, а то там понял, тут нема?
    Posted via Mobile Device
    Не ёрзайте - если чего в мх-кей нет, то пока его до вас везут, всё уже с циклона скопипастят и в куй вставят ...

  14. #11
    Elite Member Аватар для ROMAN_-_666
    Регистрация
    14.01.2005
    Адрес
    Буро
    Сообщений
    6,849
    Спасибо
    36
    Благодарностей: 1,099 : 513
    Цитата Сообщение от eddiman Посмотреть сообщение
    Не ёрзайте - если чего в мх-кей нет, то пока его до вас везут, всё уже с циклона скопипастят и в куй вставят ...
    ну теперь ждем ответа от других!!

  15. #12
    Elite Member
    Регистрация
    20.06.2003
    Адрес
    Самара
    Сообщений
    7,461
    Спасибо
    149
    Благодарностей: 2,207 : 842
    Цитата Сообщение от Aндрей1967 Посмотреть сообщение
    а сюда выложить можно а то рапида в ероре как всегда
    как заказывали ... забираем

    Р.S. Ну и жадный же до благодарностей у нас народ ...
    Вложения Вложения
    Последний раз редактировалось eddiman; 13.02.2010 в 01:58.

  16. 25 участника(ов) поблагодарили eddiman за его сообщение:

    Alex_shmel (13.02.2010), Aндрей1967 (13.02.2010), belofas (15.02.2010), BoB4iK (13.02.2010), Di4 (13.02.2010), Direktor (14.02.2010), edik77 (14.02.2010), Estonij (15.02.2010), kairoshhh (08.02.2011), Killer-jizni (28.05.2010), KORSAR86 (13.02.2010), maxim'ka (13.02.2010), Mihail_tm (15.02.2010), olimjon-sp (13.02.2010), paganini (13.02.2010), point21 (13.02.2010), renat_d (13.02.2010), RV6CL (13.02.2010), Sasha313 (13.02.2010), SHLL (13.02.2010), slavik.gul (13.02.2010), traveler1 (12.11.2015), Troyanec (18.02.2010), Viking (13.02.2010), vlad66 (17.03.2010)

Страница 1 из 15 1 2 3 4 5 6 7 8 9 10 11 ... ПоследняяПоследняя

Похожие темы

  1. Ответов: 2
    Последний ответ: 08.11.2011, 18:42
  2. Ответов: 30
    Последний ответ: 08.05.2011, 22:43
  3. LG NCK CALC v3.61 (web & wap) and download free.....
    от andreiground в разделе LG
    Ответов: 4
    Последний ответ: 29.10.2007, 23:40

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru