Всем доброго времени суток! Пришла Nokia 6600i(rm-570), с дефектом - при включении загорается надпись "Nokia" (без подсветки) , висит 3-5 сек. и выключается! Тел. разбирал , никаких следов паления и влаги не обнаружил! При подключению к любому боксу в local mode не становится.Старый добрый UFS HWK при флэшинге выдает ошибку, лог прилагаю -Скрытый текст: Показать1ST BOOT : C0,07 [Rm-570] [2.0.9.0]
RAPx ID : 000000010000022600010006030C192101023000
EM 1 ID : 00000295
EM 2 ID : 00000B22
RAPx PBID : 16A0000D47F38B56C80F61497AD0A6B528021A82
RAPx MODE : 00
RAPx HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
RAPx ROID : 273F6D55DFAAF68F
CMT 1ST Boot OK
CMT 2ND Bt: RAP3Gv3_2nd.fg, Ver: 9.11.1
CMT FLID0 : 00EC220C-00008921, Sam K8F1215ETM
CMT FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
CMT MCID0 : FFFF0000-00000000
CMT 2ND Boot OK
CMT ALGO : RAP3Gv3_algo_xsr15.fg, Ver: 1.40.0
CMT VPP : Internal
DUAL LINE : True
CMT ALG Boot OK
IMAGE : rm570__36.60.mcusw
CMT NOR Erase Area: 0x00000000-0001FFFF
CMT NOR Erase Area: 0x00040000-000BFFFF
CMT NOR Erase Area: 0x000C0000-0013FFFF
CMT NOR Erase Area: 0x01780000-0197FFFF
CMT NOR Erase Area: 0x00140000-0177FFFF
CMT FLASH ERASE OK, Time: 00:05
DATA_MISMATCH: RX2 Pin not Connected, or Used 5 Pin Cable !
CERT_BLK_ERROR at: 0x000402C0, FF
ERR: CMT FLASH WRITE C_BLK FFFFFFFFFFFFFF0210000000F172, LN: 0x000400, Time: 00:09
Process Failed, Repowering Mobile
Последовав совету на нашем форуме прошил как dead usb: Jaf,MX Key и Cyclone.
Лог Jaf -Скрытый текст: ПоказатьJAF version 1.98.66
Detected PKEY: 9000051F
Card life counter: 88.42%
P-key nokia module version 01.02
Detected UFS_USB V2.8 (c) SarasSoft 2007. version: 01.B1, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.0.2.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-570\
Searching for default location of ini...
Checking path: \Products\RM-570\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-570\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Detected P-KEY: 9000051F
P-key nokia module version 01.02
Init usb communication...
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60.mcusw
PPM Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60.mcusw
PPM Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60.ppm_i
CNT Flash file: C:\раб стол\jsf\6600i rm-570\rm570__36.60_ISM_014.image_i_ru_black
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 9000051F
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000051F
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
Backing up CRT...
Detected P-KEY: 9000051F
P-key nokia module version 01.02
Init usb communication...
Reading IMEI...
Failed! Aborting!
Failed to backup CRT...
Detected P-KEY: 9000051F
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Error reading phone init data...
Лог Mx Key -Скрытый текст: ПоказатьLibrary version: 1.0.0.7931(21-03-2010), 1.0.0.12676(21-03-2010)
Processing file: rm570__36.60.mcusw as MCU
[BB5,XSR 1.5] size: 23.31 MB
Supported RAP Ids: 0103192101003000, 010C192101003000, 030C192101023000
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable,Battery back to device.
Insert Charger or Press phone's power button
Waiting for USB device ...
[ADL] Pooling for ADL device
[ADL] Device found: nmwcdnsuc\Nokia USB Flashing Generic, ID: 2FDAB130
RAP SYSTEM ASIC ID: 000000010000022600010006030C192101023000
RAP EM0 ID: 00000295
RAP EM1 ID: 00000B22
RAP PUBLIC ID: 16A0000D47F38B56C80F61497AD0A6B528021A82
RAP ASIC MODE ID: 00
RAP ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
RAP ROM ID: 273F6D55DFAAF68F
[ADL] Flashing CMT Update Server Data, ULO: 0x3900 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, UPDAPP: 0x4ACC0 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Flashing CMT Update Server Data, PASUBTOC: 0x59740 bytes
[ADL] Update Server code succesfully sent to phone.
[ADL] Pooling for ADL device
[ADL] Timeout, no usb device found.
Flashing terminated with error(s) in 36.953 s
Лог Cyclone -Скрытый текст: ПоказатьNokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.8236
Handling device: [Cyclone Team], [Cyclone Bootloader]
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.21, (Feb 12 2010 23:32:03, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2010 wk6
Box Serial Number: C000198F
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk19
Initializing security card...
Card Serial Number: D0000A06
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,91v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,78v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,85v PASSED
Box VPP disabled
VPP Voltage 0,00v PASSED
Internal Box VPP Enabled
VPP Voltage 4,70v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
External Box VPP Enabled
VPP Voltage 0,02v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: FALSE
Initializing FBUS...
All initialized - Ready to work
Scanning avaiable products...
Processing C:\Program Files\Nokia\Phoenix\Products\...
Processing C:\Program Files\Common Files\Nokia\DataPackage\Products\...
Found 77 products, Filtering BB5 Products - wait...
7 Products left after filtering. Ready.
Retrieving Variants for Product RM-570 - wait...
1 Variants Retrieved
Processing pre flash tasks...
Read RPL operation not possible for USB bus
Backing up simlock...
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Simlock backup problem -> Phone not detected
Backup simlock thread finished, continuing...
Pre flash tasks finished, continuing...
Selecting USB Flashing Method...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
[BB5 NMWCD]: Found 0 active devices
[BB5 NMWCD]: Not Found!
Proceeding with Dead USB Mode
Press power-on shortly to run USB Boot ROM
[BB5 BootRom]: Found 1 active devices
[Nokia USB Flashing Generic]: Opening Connection
[Nokia USB Flashing Generic]: Port opened OK!
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101023000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16A0000D47F38B56C80F61497AD0A6B528021A82
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_ROM_ID: 273F6D55DFAAF68F
DeadUSB.raw, Type: 2nd Boot Loader, Rev: , Algo: BB5
Sending RAW Loader...
Sending CMT UPDAPP Certificate and Data...
Waiting for ADL Server Startup...
[BB5 ADL Server]: Found 0 active devices
[BB5 ADL Server]: Not Found!
Failed to Process all Image files -> Failed to prepare BB5 USB Flashing
Версию прошивки заливал на данный момент последнюю - 36.60_014
Аналогично пробовал шить по FBUS - родным кабелем и универсалкой , никаких изменений не произошло! После чего прогрел бутерброд и подкинул к боксам безрезультатно! В наличии есть еще MT BOX правда не хватило ума чтобы он поддерживал эту модель(пробовал обновлять griffin.ini, Mt tool 3.9). Заранее спасибо! Может кто нибдь встречался с такой проблемой!
