Страница 1 из 3 123 ПоследняяПоследняя
Показано с 1 по 12 из 28

Тема: C5 rm-645 i fbus flashing

  1. #1
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18

    C5 rm-645 i fbus flashing

    privet vsem

    prinesli telo po garantii c5.vkluchaietsa pishet pamiat malo i potom ashibka samotestirovania telefona. xatel proshic universalom nachel stirac i atvalilsa shas telefon ne vkluchaietsa. poluchil kirpich. ktonibud flashil etot aparat po fbus i kakim boxom.
    pod rukoi mxkey.jaf.cyclon.universal. skachal paslednii phoenix Phoenix_Service_Software_2010.12.008.42304_cracked etot toje atkazivaietsa cherez deed usb prashit.

    zaranii vsem spasibo

  2. #2
    Member
    Регистрация
    14.10.2004
    Сообщений
    386
    Спасибо
    40
    Благодарностей: 18 : 12
    По идее циклон должен справиться.

  3. #3
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от faderaway Посмотреть сообщение
    По идее циклон должен справиться.
    pravda cyclonom prashil segodnia cherez fbus no defekt astalsa (memory full) factory setings delal ne pomogaiet.shil versii 31.022. est idei !?

  4. #4
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    logi ot cyclon

    log info

    Код:
    MCU Version	V ICPR82_10w08
    MCU Date	26-02-10
    Product		RM-645
    Manufacturer	(c) Nokia
    IMEI		3593450331xxxxx
    Mastercode	7514441250
    IMEI Spare	3A95430533911306
    IMEI SV		3395430533911316F0000000
    PSN		CGL926764
    Product Code	0598912
    Module Code	0204492
    Basic Product Code	0591907
    PSD		0000000000000000
    LPSN		0
    APE SW		031.022
    APE Variant	031.022031.022.05.01031.022.C00.01
    APE Test		rm645_ENO_v_0.LV001
    APE HW		256
    APE ADSP	256
    RETU		35
    TAHVO		00
    AHNE		11
    HW		6000
    RFIC		|Vapaus_5.1 | Mikki_1.1
    DSP		ICPR82_10w08
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF

  5. #5
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    log prashivki

    Код:
    Scanning avaiable products...
    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Found 1 products, Filtering BB5 Products - wait...
    1 Products left after filtering. Ready.
    Retrieving Variants for Product RM-645 - wait...
    17 Variants Retrieved
    Processing pre flash tasks...
    Backing up RPL...
    RPL Creation started...
    Processing CMT Part...
    Storing Product Code...
    Storing PSN...
    Storing HWID...
    Trying to store Simlock...
    Reading Configuration Key...
    Hashing...
    Reading SHA1-RSA Signature...
    Reading SHA1-HMAC Signature...
    Storing Simlock...
    Trying to store WMDRM RPL...
    Reading Keys...
    Storing WMDRM PD...
    Reading Security Block...
    Security block OK and saved to "RM-645_359345033193166_15.07.2010_224240.SecurityBlock.PM"
    WARNING: "0B50000A8CBF0D49577E70566771D9D758B36DDA.C000097A" Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    Prepare phone failed with message -> Not found required CMT Secondary Loader
    Neither CYC file and exists or failed to read it from phone (Failed to Boot / Prepare Phone)
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    APE Subsystem Not Found
    Flashbus Write baud set to 5.0Mbits
    Storing NPC...
    Storing CCC...
    Storing HWC...
    CMT VARIANT Not Found
    Restarting MCU...
    RPL Saved OK
    RPL backup thread finished, continuing...
    Backing up simlock...
    MCU Version	V ICPR82_10w08
    MCU Date	26-02-10
    Product		RM-645
    Manufacturer	(c) Nokia
    IMEI		3593450331xxxxx
    Mastercode	7514441250
    Simlock backup OK, saved to RM-645_359345033193166_15.07.2010_224254.SLBackup.PM
    Backup simlock thread finished, continuing...
    Pre flash tasks finished, continuing...
    Processing rm645_031.022_prd.core.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND
    EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND
    EraseArea[0,CMT]: 0x008E0000-0x0AE3FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.735s
    Writing all blocks...
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT SOS+PMML Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT SOS*UPDAPP Certificate...
    Writing CMT SOS*DSP0 Certificate...
    Writing CMT LDSP Certificate...
    Writing CMT SOS*ISASW Certificate...
    Writing CMT SOS+CORE Certificate...
    Writing CMT SOS+ROFS1 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 106.328s
    Flashing Speed: 7150,45 kBit/S
    Restarting MCU...
    Processing rm645_031.022_prd.core.fpsx (APE)...
    Processing rm645_031.022_05.01_Russian_prd.rofs2.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_05.01_Russian_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x06D40000-0x0A03FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.234s
    Writing all blocks...
    Writing CMT SOS+ROFS2 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 55.797s
    Flashing Speed: 7229,68 kBit/S
    Restarting MCU...
    Processing rm645_031.022_05.01_Russian_prd.rofs2.fpsx (APE)...
    Processing rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0A040000-0x0AE3FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.62s
    Writing all blocks...
    Writing CMT SOS+ROFS3 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 0.79s
    Flashing Speed: 823,29 kBit/S
    Restarting MCU...
    Processing rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx (APE)...
    Processing rm645_031.022_U000.000_prd.uda.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		0B50000A8CBF0D49577E70566771D9D758B36DDA
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_U000.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0AE40000-0x0F63FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.313s
    Writing all blocks...
    Programming Status OK!
    All blocks written OK! Time taken 1.469s
    Flashing Speed: 5154,43 kBit/S
    Restarting MCU...
    Processing rm645_031.022_U000.000_prd.uda.fpsx (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    MCU Version	V ICPR82_10w08
    MCU Date	26-02-10
    Product		RM-645
    Manufacturer	(c) Nokia
    IMEI		3593450331xxxxx
    Mastercode	7514441250
    IMEI Spare	3A95430533911306
    IMEI SV		3395430533911316F0000000
    PSN		CGL926764
    Product Code	0598912
    Module Code	0204492
    Basic Product Code	0591907
    PSD		0000000000000000
    LPSN		0
    APE SW		031.022
    APE Variant	031.022031.022.05.01031.022.C00.01
    APE Test		rm645_ENO_v_0.LV001
    APE HW		256
    APE ADSP	256
    RETU		35
    TAHVO		00
    AHNE		11
    HW		6000
    RFIC		|Vapaus_5.1 | Mikki_1.1
    DSP		ICPR82_10w08
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!

  6. #6
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    selftest

    Код:
    Selftests to proceed: 41
    Passed		ST_SLEEP_X_LOOP_TEST
    Passed		ST_UEM_CBUS_IF_TEST
    Passed		ST_EAR_DATA_LOOP_TEST
    Passed		ST_SIM_CLK_LOOP_TEST
    Passed		ST_SIM_LOCK_TEST
    Passed		ST_SECURITY_TEST
    Passed		ST_PWR_KEY_TEST
    Passed		ST_CURRENT_CONS_TEST
    Passed		ST_HOOKINT_TEST
    Passed		ST_BTEMP_TEST
    Passed		ST_MBUS_RX_TX_LOOP_TEST
    Passed		ST_KELVIN_BATVOLTAGE_TEST
    Failed		ST_KELVIN_VIBRA_TEST
    Passed		ST_KELVIN_CAPACITOR_TEST
    Passed		ST_KELVIN_MISC_TEST
    Failed		ST_KELVIN_CHARGING_TEST
    Passed		ST_KELVIN_AUDIO_TEST
    Passed		ST_KELVIN_XEAR_TEST
    Passed		ST_USB_CHARGING_TEST
    Passed		ST_DIGIMIC_TEST
    Passed		ST_CDSP_SLEEPCLOCK_FREQ_TEST
    Failed		ST_CDSP_RF_BB_IF_TEST
    Failed		ST_CDSP_RF_SUPPLY_TEST
    Failed		ST_CDSP_TX_IQ_TEST
    Failed		ST_CDSP_TXC_DATA_TEST
    Failed		ST_CDSP_RX_PLL_PHASE_LOCK_TEST
    Failed		ST_CDSP_TX_PLL_PHASE_LOCK_TEST
    Failed		ST_CDSP_WCDMA_TX_POWER_TEST
    Failed		ST_CDSP_RX_IQ_LOOP_BACK_TEST
    Failed		ST_CDSP_GSM_TX_POWER_TEST
    Passed		ST_KEYBOARD_STUCK_TEST
    Passed		ST_LPRF_IF_TEST
    Passed		ST_CAMERA_IF_TEST
    Passed		ST_SEC_CAMERA_IF_TEST
    Passed		ST_LED_FLASH_TEST
    Passed		ST_LPRF_AUDIO_LINES_TEST
    Passed		ST_MAIN_LCD_IF_TEST
    Passed		ST_BT_WAKEUP_TEST
    Passed		ST_USB_LOOP_TEST
    Passed		ST_RADIO_TEST
    Passed		ST_LED_FLASH_IF_TEST
    Selftests done, Tests total: 41, Tests passed: 30, Tests not passed: 11

  7. #7
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    tut shto nikago bolshe net !?

    karoche
    atkril telo vnutri idealnii sledov vlagi net vseravno perekatal buter. rezultata ne dabilsa

  8. #8
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    niujeli nikto s takim ne stalkivalsa

  9. #9
    Mega Member
    Регистрация
    21.07.2003
    Адрес
    Москва, Россия
    Сообщений
    1,360
    Спасибо
    40
    Благодарностей: 116 : 54
    Пришёл сегодня точно такой, прошил по usb и fbus JAF'ом, глюк с заполненной памятью не пропал. По идее надо залить файл по аналогии с E66 и другими смартами типа E66_blank_504KB_pmm_10.fpsx, только где его взять ? Или может помогут какие то блоки от PM ?

  10. #10
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    Цитата Сообщение от (495) 1308666 Посмотреть сообщение
    Пришёл сегодня точно такой, прошил по usb и fbus JAF'ом, глюк с заполненной памятью не пропал. По идее надо залить файл по аналогии с E66 и другими смартами типа E66_blank_504KB_pmm_10.fpsx, только где его взять ? Или может помогут какие то блоки от PM ?
    da vapros aktualnii ia ego shil i po usb i po fbus raznimi boxsami.(jaf,mx-key,cyclon)
    dumaiu prashivka glukovaia budu jdac apdeita proshivki

  11. #11
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    kto nibud reshi etu problemu ochen interesno !?

  12. #12
    Senior Member Аватар для datiko1
    Регистрация
    09.11.2005
    Адрес
    Georgia Tbilisi
    Сообщений
    818
    Спасибо
    343
    Благодарностей: 28 : 18
    segodnia popalsa c5 rm-645 defekt ne vkluchaietsa proshil po fbus cyclonom aparat zarabotal polet narmalnii.defekt full memori netu. znachit defekt full memori ne softovaia problema ia dumaiu nado kapac jelezo

    Код:
    Processing C:\Program Files\Nokia\Phoenix\Products\...
    Found 5 products, Filtering BB5 Products - wait...
    4 Products left after filtering. Ready.
    Retrieving Variants for Product RM-645 - wait...
    113 Variants Retrieved
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		1F4000141A27004977E2AFF49C541440371B8CA3
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    APE Boot skipped on user request
    Flashbus Write baud set to 5.0Mbits
    Restarting MCU...
    Processing pre flash tasks...
    Pre flash tasks finished, continuing...
    Processing rm645_031.022_prd.core.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		1F4000141A27004977E2AFF49C541440371B8CA3
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Sending Certificates...
    Certificates OK
    Partitioning...
    Partitioning OK
    Started group flash erase
    EraseArea[0,CMT]: 0x00020000-0x0003FFFF, ONENAND
    EraseArea[0,CMT]: 0x00060000-0x004DFFFF, ONENAND
    EraseArea[0,CMT]: 0x008E0000-0x0AE3FFFF, ONENAND
    Erase Partition (CMT)
    Waiting 320s for erasure finish...
    Erase taken 0.750s
    Writing all blocks...
    Writing CMT ADA Certificate...
    Writing CMT KEYS Certificate...
    Writing CMT PRIMAPP Certificate...
    Writing CMT RAP3NAND Certificate...
    Writing CMT SOS+PMML Certificate...
    Writing CMT PASUBTOC Certificate...
    Writing CMT PAPUBKEYS Certificate...
    Writing CMT GENIO_INIT Certificate...
    Writing CMT SOS*UPDAPP Certificate...
    Writing CMT SOS*DSP0 Certificate...
    Writing CMT LDSP Certificate...
    Writing CMT SOS*ISASW Certificate...
    Writing CMT SOS+CORE Certificate...
    Writing CMT SOS+ROFS1 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 105.906s
    Flashing Speed: 7178,94 kBit/S
    Restarting MCU...
    Processing rm645_031.022_prd.core.fpsx (APE)...
    Processing rm645_031.022_05.01_Russian_prd.rofs2.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		1F4000141A27004977E2AFF49C541440371B8CA3
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_05.01_Russian_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x06D40000-0x0A03FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.235s
    Writing all blocks...
    Writing CMT SOS+ROFS2 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 55.734s
    Flashing Speed: 7237,85 kBit/S
    Restarting MCU...
    Processing rm645_031.022_05.01_Russian_prd.rofs2.fpsx (APE)...
    Processing rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		1F4000141A27004977E2AFF49C541440371B8CA3
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0A040000-0x0AE3FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.62s
    Writing all blocks...
    Writing CMT SOS+ROFS3 Certificate...
    Programming Status OK!
    All blocks written OK! Time taken 0.94s
    Flashing Speed: 691,91 kBit/S
    Restarting MCU...
    Processing rm645_031.022_C00.01_DEFAULT_prd.rofs3.fpsx (APE)...
    Processing rm645_031.022_U000.000_prd.uda.fpsx (CMT)...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID:		00000C35
    CMT_EM_ASIC_ID:		00000C30
    CMT_PUBLIC_ID:		1F4000141A27004977E2AFF49C541440371B8CA3
    CMT_ASIC_MODE_ID:	00
    CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC:	E693EF0D
    CMT_SECURE_ROM_CRC:	AC22615B
    CMT Ready!
    rm645_031.022_U000.000_prd.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
    Searching for BootCode: DualLine 32Bit
    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.20.1, Algo: BB5
    Flashbus Write baud set to 650Kbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Searching for BootCode: DualLine 32Bit
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported
    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.20.1, Algo: XSR 1.6
    Writing CMT PASUBTOC Certificate...
    Writing CMT ALG Certificate...
    CMT Algorithm Ready!
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    Adding FUR Client (CMT, State: Ready)...
    CMT FUR Ready!
    Box VPP disabled
    Internal CMT Phone VPP Enabled
    PAPUBKEYS Hash for CMT: D7D05CFC982BF1491F4BE3FE0F28D3016DA5E057
    Flashbus Write baud set to 5.0Mbits
    Started group flash erase
    EraseArea[0,CMT]: 0x0AE40000-0x0F63FFFF, ONENAND
    Waiting 320s for erasure finish...
    Erase taken 0.313s
    Writing all blocks...
    Programming Status OK!
    All blocks written OK! Time taken 1.500s
    Flashing Speed: 5047,91 kBit/S
    Restarting MCU...
    Processing rm645_031.022_U000.000_prd.uda.fpsx (APE)...
    All images processed OK! Processing post flash tasks...
    Setting Factory Defaults...
    Factory defaults OK
    Reading info...
    MCU Version	V ICPR82_10w08
    MCU Date	26-02-10
    Product		RM-645
    Manufacturer	(c) Nokia
    IMEI		35934503967xxxx
    Mastercode	5441656760
    IMEI Spare	3A95430593769905
    IMEI SV		3395430593769915F0000000
    PSN		CAP773617
    Product Code	0593572
    Module Code	0204492
    Basic Product Code	0591907
    PSD		0000000000000000
    LPSN		0
    RETU		35
    TAHVO		00
    AHNE		11
    HW		6000
    RFIC		|Vapaus_5.1 | Mikki_1.1
    DSP		ICPR82_10w08
    Simlock Server	SIMLOCK SERVER
    Simlock Key	2440700000000000
    Simlock Profile	0000000000000000
    Simlock Key Cnt	0
    Simlock FBUS Cnt	0
    Simlock [1,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [1,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [1,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [1,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [2,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [2,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [2,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [3,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [3,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [3,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [4,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [4,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [4,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [5,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [5,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [5,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [6,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [6,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [6,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,1]	State: OPENED	Type: MCC-MNC	Data: FFFFFF
    Simlock [7,2]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,3]	State: OPENED	Type: GID	Data: FFFF
    Simlock [7,4]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Simlock [7,5]	State: OPENED	Type: IMSI	Data: FFFFFFFFFFFFFFFF
    Read info thread finished, continuing...
    Post flash tasks finished!
    Flashing successfully finished!

Похожие темы

  1. C5-00 RM-645
    от MAVEN в разделе Nokia для новичков
    Ответов: 2
    Последний ответ: 27.07.2011, 20:48
  2. КП на C5-00 RM-645
    от PEELO в разделе Nokia для новичков
    Ответов: 6
    Последний ответ: 10.07.2011, 22:19
  3. Nokia c5 rm-645
    от SEkiler в разделе Nokia для новичков
    Ответов: 5
    Последний ответ: 26.12.2010, 18:30
  4. T500 flashing 100% патом flashing MCU filed
    от filthkot в разделе VLSI - Series
    Ответов: 2
    Последний ответ: 02.02.2006, 18:07

Социальные закладки

Социальные закладки

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
  Рейтинг@Mail.ru