всем привет е 840 немного зависал, решил прошить но при прошивке выдает ошибку шью уфсом....помогите разобраться...

Region: 1, 0x20000000-0x20000007, Length: 8 bytes
Region: 2, 0x20010000-0x200147C3, Length: 18372 bytes
Region: 3, 0x20020000-0x2002DD93, Length: 56724 bytes
Region: 4, 0x20040000-0x200404DF, Length: 1248 bytes
Region: 5, 0x20042000-0x20195E8B, Length: 1392268 bytes
Region: 6, 0x201B0000-0x2137EDE3, Length: 18673124 bytes
Region: 7, 0x21B00000-0x21E916DF, Length: 3741408 bytes
Region: 8, 0x21F10000-0x21F15879, Length: 22650 bytes
Region: 9, 0x28000000-0x298B1AA3, Length: 25893540 bytes
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01.sre
Flash1: Fl_Id: 00EC0000_22070000 - Samsung K8C5415EBM
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
MCU File: E840XEHB1.s3
Flashing NOR part...
ErClos: rplyCLOS-erreom.
Bad response: 0x002C, 6572
ErClos: rplyCLOS-erreom.
Bad response: 0x0027, 6572
Write Failed at: 0x204E4000