module v3.07
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.932.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
CPU: 6235:8A04:8A01
bbchip secure ver: FF
bbchip bl ver: FE
NOR flash chip: S_DA_NOR_FLASH_NOT_FOUND
warning: NOR flash chip is not installed
NAND flash chip: S_DONE
flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
flash size: 64Mb
page/spare size: 0200/0010
pages/block: 0020
bits i/o: 08
address cycles: 04
internal RAM: S_DONE
size: 00010000
external RAM: S_DA_DEVICE_NOT_FOUND
boot style: S_NAND_FLASH_BOOT
bootcode current/expected: 3.2, 3.2
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: BR35_V00.14
detect NAND info...
number of areas to read: 1
reading (HW_STORAGE_NAND)...
nfi area detection...
bootloader version: BENRUI35_09A_BOOTLOADER_V005_MT6235B_BR35_V00_14.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas to read: 1
reading (HW_STORAGE_NAND)...
error: can not read memory: 0FB1:S_FT_NAND_READLEN_NOT_PAGE_ALIGNMENT
error: can not read flash: 0FB1:S_FT_NAND_READLEN_NOT_PAGE_ALIGNMENT
startup code area #1 detection done
rom info ver: 07
sw version: BENRUI35_09A_PCB01_GPRS_MT6235B_S01.BR35_V00_14.BIN
project-id: BR35_V00.14, FD32CA7A
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [enhanced] generation
TCL-ID is absent
===> done
Disconnect...
done