Оригинальный текст: http://support.lgtool.net/showthread...l.&p=14#post14
Активация LGTooL производится только для активированных ключей SETooL (т.е. те, которые работают с версией ПО SETooL выше версии v1.01), с обновлённым внутренним ПО карты SETooL (обновление производится специальной утилитой, которую можно найти в приложении к этому сообщению), на компьютере, который подключен к интернет без кэширующего proxy (или нормально настроенными прозрачным прокси, у которого открыты TCP порты 443,1934)
Below is the steps:
1) Check if your card is activated.
2) Update your setool card.
3) Purchase LG activation
4) Put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username, password, server manually.
note: Updater will not be started without egate driver installed.
server address is:
on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )
you will get "Ready to work" text.
Then press "Activate LGTool" button
if your card eligible for activation, you will get next text:
Код:
setool2 SmartCard updater [0.92]
server read: "srv01.dontexist.com"
username read: "update_test"
Please click on reader with setool2 SmartCard.
Ready to work
Checking with server..
LG application activated