2600 (rh-59) умер после прошивки

[EboomE]

Привет принесли ето чудо с диагнозом: "Викл с сим-картой". Решил стереть, прошить, пролить пм.Стирал тел уфсом. После ерейза, уфс перестал конектить ТА:

1st Boot Err: Bad Resp UPP, 02 FF FF 72 
Process Failed, Repowering Mobile

МХ через уфс конектит тело, но при прошивке выдает:

ASIC ID: 0x1201 [UPP_2M ver: 1]
 SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2A7E [AMD S29NS032J,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 
 Algorithm: u_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78B8
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00D28ABC:2984DA60
ASIC type: 2
UEM Imei: 35************
Flash Imei: 35************
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35************_BACK.rpl" 
Processing MCU file: rh59_06.420 
 [DCT4,DCT4 ALGORITHM]  size: 1.70 MB
 Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201
ASIC ID: 0x1201 [UPP_2M ver: 1]
 SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2A7E [AMD S29NS032J,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 
 Algorithm: u_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78B8
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00D28ABC:2984DA60
Area [01000000-0100FFFF] erased in 0.625 s
Area [01010000-013AFFFF] erased in 25.047 s
Area [013B0000-013EFFFF] erased in 1.953 s
Area [017B0000-017EFFFF] erased in 0.125 s
Flash programming ...
Error while programming [14] at 0x010C8000, Result: 0872
flashing terminated !
Task failed at (08000025)!!!
 Last RX buffer: 08 72

Причём, ета ошибка на разних местах

После ребола флешки, ничего не изменилось. В чем загвоздка?

[buzgich]

Привет принесли ето чудо с диагнозом: "Викл с сим-картой". Решил стереть, прошить, пролить пм.Стирал тел уфсом. После ерейза, уфс перестал конектить ТА:

1st Boot Err: Bad Resp UPP, 02 FF FF 72 
Process Failed, Repowering Mobile

МХ через уфс конектит тело, но при прошивке выдает:

ASIC ID: 0x1201 [UPP_2M ver: 1]
 SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2A7E [AMD S29NS032J,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 
 Algorithm: u_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78B8
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00D28ABC:2984DA60
ASIC type: 2
UEM Imei: 35************
Flash Imei: 35************
RPL saved to "C:\mobileEx\3.5\data\backup\RPL\35************_BACK.rpl" 
Processing MCU file: rh59_06.420 
 [DCT4,DCT4 ALGORITHM]  size: 1.70 MB
 Supported Ids: 0120, 0121, 1021, 1120, 1130, 1131, 1201, 2140, 2142, 2201
ASIC ID: 0x1201 [UPP_2M ver: 1]
 SecondaryBoot: u_2nd.fia [DCT4] version: 4.76.0 revision: 0.7 size: 0x9A0
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
FlashID0: 0001 2A7E [AMD S29NS032J,32 Mbits] page size: 64 K type: NOR area: 01000000-013FFFFF
FlashID1: 0000 0001 [unused/removed] 
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514 
 Algorithm: u_amd.fia [DCT4 ALGORITHM] version: 4.76.0 revision: 0.7 size: 0x78B8
 Supported Ids: 0011, 0010, 0121, 0120, 1120, 1131, 1130, 2141, 2140, 2142, 2151, 1141, 1181, 1015, 1021, 2031, 2030, 3041, 1201, 2201, 2291, 3161, 3160, 3164
Performing Flash Authentication ...OK
UEM ID: 00D28ABC:2984DA60
Area [01000000-0100FFFF] erased in 0.625 s
Area [01010000-013AFFFF] erased in 25.047 s
Area [013B0000-013EFFFF] erased in 1.953 s
Area [017B0000-017EFFFF] erased in 0.125 s
Flash programming ...
Error while programming [14] at 0x010C8000, Result: 0872
flashing terminated !
Task failed at (08000025)!!!
 Last RX buffer: 08 72

Причём, ета ошибка на разних местах

После ребола флешки, ничего не изменилось. В чем загвоздка?

пробуйте ребол - замена проца.